• Safety and Health at Work
• /
• v.12 no.4
• /
• pp.496-504
• /
• 2021

Background: With the increasing demand for industrial robots and the "noncontact" trend, it is an appropriate point in time to examine whether risk assessments conducted for robot operations are performed effectively to identify and eliminate the risks of injury or harm to operators. This study discusses why robot accidents resulting in harm to operators occur repetitively despite implementing control measures and proposes corrective actions for risk assessments. Methods: This study collected 369 operator-injured robot accidents in Korea over the last decade and reconstructed them into the mechanism of injury, work being undertaken, and bodily location of the injury. Then, through the techniques of Systematic Cause Analysis Technique (SCAT) and Root Cause Analysis (RCA), this study analyzed the root and direct causes of robot accidents that had occurred. Causes identified included physical hazards and complex combinations of hazards, such as psychological, organizational, and systematic errors. The requirements of risk assessments regarding robot operations were examined, and three case studies of robot-involved tasks were investigated. The three assessments presented were: camera module processing, electrical discharge machining, and a panel-flipping robot installation. Results: After conducting RCA and comparing the three assessments, it was found that two-thirds of injury-occurring from robot accidents, causative factors included psychological and personal traits of robot operators. However, there were no evaluations of the identifications of personal aspects in the three assessment cases. Conclusion: Therefore, it was concluded that personal factors of operators, which had been overlooked in risk assessments so far, need to be included in future risk assessments on robot operations.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.655-657
• /
• 1999

In this paper we will introduce an posture error reduction algorithm for Mobile Robot. We classified odometry error into two categories. and focus on systematic odometry error correction only. Because it is the primary reason for mobile robot navigation. For this procedure we used some robot specifications and modeled robot behavior. Through some experiment, we could obtain new system specs. After modeling, Robot navigation precision was improved.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.138.5-138
• /
• 2001

The autonomous robot has the ability of obstacle avoidance and target tracking with some manufactured information. In this paper, it is shown that autonomous mobile robot can avoid fixed obstacles using the map made before and the fuzzy controller is adopted with the global path planing and the local path planing when the robot navigates. With that map sensor, information will be used when an autonomous robot navigates. This paper proves that robot can navigate through optimized route and keep the stable condition.

• Korean Security Journal
• /
• no.26
• /
• pp.89-119
• /
• 2011

The purpose of this study is to progress the development plan of safety management on the intelligent robot through safety analysis on the intelligent robot, major present condition of safety management on the intelligent robot, enforcement method of safety management on the intelligent robot. The following is the result of the study. First, we have to establish the provision or the special legislation to regulate the safety management of the intelligent robot substantially in the intelligent robot development and supply promotion law, the enforcement ordinance, the enforcement regulation. And, we should propel to establish the provision on the safety management of the intelligent robot in the laws related on ethics and safety. Second, we should establish the Robot Ethical Charter through the national and international agreement to give a guarantee against the safety management of the intelligent robot. Furthermore, we have to induces people's interest on the safety management of the intelligent robot through offering the public information of the Robot Ethical Charter for coexistence of human and robot and have to understand about rights of the intelligent robot. Third, the security industry and learned circles have to recognize the important effect that the intelligent robot gets in the security industry and try to grope the safety management and the application plan on the intelligent robot. Also, the security industry and learned circles should concern not only using and managing of the intelligent robot including the military robot, the security robot but also protecting human from the intelligent robot.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1781-1785
• /
• 2004

In existing factory, robot has less necessity that consider person. However, person should be considered at design and use of service robot. To service robot can be used in everyday life along with this, more functions are required. Specially, medical service robot needs function that is intelligence function. Especially, to help patient brain disease patient (cerebral hemorrhage, cerebral infarction, imbecility), gait assistance Mobile robot consider ergonomic element necessarily. In order to develop the medical support service robot, the ergonomic design should be considered. This robot ergonomic design parameters are treated in ("evelopment of Medical Support Service Robot Using Ergonomic Design" 2003, ICASS) Fig2 show this Robot. In this study, navigation algorithm of walk assistance robot is analyzed in ergonomic view. Navigation algorithm of Mobile robot can divide by two patterns. Traditional derivative method has shortcoming in dynamic environment. Reactive method is result that react excellently in dynamic environment. However, number of behavior function is limited. So hybrid navigation algorithm was proposed by the alternative way. We consider enough user specificity at navigation algorithm application of gait assistance robot.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.10
• /
• pp.1029-1037
• /
• 2009

Recently, the technologies of mobile robots have been growing rapidly in the fields such as cleaning robot, explosive ordnance disposal robot, patrol robot, etc. However, the researches about the autonomous underwater robots have not been done so much, and they still remain at the low level of technology. This paper describes a model of 3-joint (4 links) fish robot type. Then we calculate the dynamic motion equation of this fish robot and use Singular Value Decomposition (SVD) method to reduce the divergence of fish robot's motion when it operates in the underwater environment. And also, we analysis response characteristic of fish robot according to the parameters of input torque function and compare characteristic of fish robot with 3 joint and fish robot with 2 joint. Next, fish robot's maximum velocity is optimized by using the combination of Hill Climbing Algorithm (HCA) and Genetic Algorithm (GA). HCA is used to generate the good initial population for GA and then use GA is used to find the optimal parameters set that give maximum propulsion power in order to make fish robot swim at the fastest velocity.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.8
• /
• pp.1231-1239
• /
• 2015

We developed a robot that has four limbs, each of which has the same kinematic structure and has 6 degrees of freedom. The robot is 600mm high and weighs 4.3kg. The robot can perform walking and manipulating task by using the four limbs selectively. The robot has three walking patterns. The first one is biped walking, which uses two rear limbs as legs and two front limbs as arms. The second one is biped walking with supporting arms, which is basically biped walking but uses two arms as supporting legs for increasing stability of the robot. The last one is quadruped walking, which uses all the four limbs as legs. When a task for the robot is given, the robot approaches the task point by selecting an appropriate walking pattern among three walking patterns and performs the task. The robot has many degrees of freedom and is a redundant system for a three dimensional task. We propose a redundancy resolution method, in which the robot’s translational move to the task point is modeled as a prismatic joint and optimal solutions are obtained by optimizing some performance criteria. Several simulations are performed for the validity of the proposed method.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.404-407
• /
• 2003

In this paper, we have designed the humanoid robot's leg parts with 12 D.O.F. This robot uses ankle's joints to confirm stability of walking performance. It is less movable to use ankle's joints than to do upper body's balancing joints like IWR-III, which needs three parts of via points, support leg, swing leg and balancing joints. Instead, the proposed humanoid robot needs support leg and swing leg via points. ZMP(Zero Moment Point) is utilized to guarantee the stability of robot's walking. The humanoid robot uses the ankle's joints to compensate for IWR-III's balancing joints movement. Actually we concern about a motor performance when making a real humanoid robot. So a simulator is employed to know each joint torque of humanoid robot. This simulator needs D-H(Denavit-Hartenberg) parameters, robot's mass property and two parts of via points. The simulation results are robot's walking trajectories and each motor torque. Using the walking trajectories, we can see the robot's walking scene with 3D simulator. Before we develop the humanoid robot, simulation of the humanoid robot's walking performance is very helpful. And the torque data will be used to make humanoid's joint module.

• Journal of Drive and Control
• /
• v.14 no.4
• /
• pp.51-60
• /
• 2017

In this study to develop disaster response robot in complex disaster site, we present the design of hydraulic manipulators for armored robot systems. To this end, we performed voice of customer researches with firefighters and rescue personnel. We created and analyzed the mission scenario of firefighters and rescue personnel in complex disaster situations, and derived the required functions of the robot to successfully perform missions. A heavy-duty, heat resistant, dexterous hydraulic robot manipulators is designed to realize the required functions. The designed robot has been verified through simulations and analysis in terms of the working area of the robot, actuating torques, and temperature analysis.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.8
• /
• pp.726-734
• /
• 2007

Generally, a mobile robot is moved by original input programs. However, it is very hard for a non-expert to change the program generating the moving path of a mobile robot, because he doesn't know almost the teaching command and operating method for driving the robot. Therefore, the teaching method with speech command for a handicapped person without hands or a non-expert without an expert knowledge to generate the path is required gradually. In this study, for easily teaching the moving path of the autonomous mobile robot, the autonomous mobile robot with the function of speech recognition is developed. The use of human voice as the teaching method provides more convenient user-interface for mobile robot. To implement the teaching function, the designed robot system is composed of three separated control modules, which are speech preprocessing module, DC servo motor control module, and main control module. In this study, we design and implement a speaker dependent isolated word recognition system for creating moving path of an autonomous mobile robot in the unknown environment. The system uses word-level Hidden Markov Models(HMM) for designated command vocabularies to control a mobile robot, and it has postprocessing by neural network according to the condition based on confidence score. As the spectral analysis method, we use a filter-bank analysis model to extract of features of the voice. The proposed word recognition system is tested using 33 Korean words for control of the mobile robot navigation, and we also evaluate the performance of navigation of a mobile robot using only voice command.