• 전기학회논문지
• /
• 제64권4호
• /
• pp.586-591
• /
• 2015

This paper proposes a force feedback system of telepresence robot for remote operation. The ultrasonic sensors attached at the robot detect the obstacles, and generate the force to the operation joystick. In order to consider the network delay, we developed the fuzzy control system using ultrasonic data and robot speed. The method to calculate the force vector from the ultrasonic data is also presented to operate the robot more accurately. The simulation and experimental results are presented to verify the safe and accurate operation of the proposed system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.501-506
• /
• 1988

This paper describes an experimental system for automatic robot programming, The SNU-ARPS (Seoul National University Automatic Robot Programming System). The SNU-ARPS generates executable robot programs for pick and place operation and some simple mechanical assembly tasks by menudriven dialog. It is intended to enable the user to concentrate on the overall operation sequence instead of the knowledge regarding the details of robot languages. To convert task specifications into manipulator motions, the SNU-ARPS uses an internal representation of the world. This representation initially consists of geometric database from CAD system and is updated at each operation step to reflect the state changes of the world.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.760-763
• /
• 1997

Using telesensor programming method, we control the space robot which has two 2-DOF manipulators. To make this control system, we devide total works by elemental operation. And we make a simulation system that can simulate sensors and robot. In the simulation system, we make a sensor data and robot paths by "Teaching by showing" method. And using these data, we control the real space robot. This off-line method can solve long time delay problem in teleoperation.operation.

• 대한인간공학회지
• /
• 제6권2호
• /
• pp.19-28
• /
• 1987

If an error occurs in the automatic mode when the advanced teleoperator system performs a task in hostile environment, then the mode changes into the manual mode. The operation by program and the operation by hyman recover the error in the manual mode. The system resumew the automatic mode and continues the given task. In order to utilize the inverse kinematics as means of the operation by program in the manual mode, Lee and Nagamachi determined the end point of the robot trajectory planning which varied with the height of the task object recognized by a T.V monitor, solved the end point by the fuzzy set theory, and controlled the position of the robot hand by the inverse kinematics and the posture of the robot hand by the operation by human. But the operation by human did take a lot of task time because the position and the posture of the robot hand were separately controlled. To reduce the task time by human, this paper developes an error recovery expert system (ERES). The position of the robot hand is controlled by the inverse kinematics of the cartesian coordinate system to the end point which is deter- mined by the fuzzy set theory. The posture of the robot hand is controlled by the modulality of the robot hand's motion which is made by the posture of the task object. The knowledge base and the inference engine of the ERES is developed using the muLISP-86 language. The experimental results show that the average task time by human the ERES which was performed by the integration of the position and the posture control of the robot hand is shorter than that of the research, done by the preliminary experiment, which was performed by the separation of the position and the posture control of the robot hand. A further study is likely to research into an even more intelligent robot system control usint a superimposed display and digitizer which can present two-dimensional coordinate of the work space for the convenience of human interaction.

• 한국컴퓨터정보학회논문지
• /
• 제13권6호
• /
• pp.13-24
• /
• 2008

오늘날 멀티 로봇에 대한 연구는 단순한 싱글 로봇들의 효율적인 운영을 넘어 공간탐색의 효율성 극대화 및 넓은 공간에서 각 로봇간의 중복작업 및 충돌 회피를 위한 부분에 집중되어 있다. 이러한 멀티 로봇을 효율적으로 운영하기 위해서는 각 싱글 로봇을 제어하고 효율적으로 작업을 할당 할 수 있는 관리체계가 필요하다. 이에 본 논문에서는 RFID를 기반으로 각 싱글로봇의 탐색공간을 효율적으로 할당함으로서 싱글로봇간의 중복 탐색을 최소화 할 수 있는 멀티로봇관리시스템을 제안한다. 또한, 탐색 작업의 완료 보장과 탐색 성능의 향상을 위하여 장애가 발생한 싱글 로봇을 탐지하고 대체 할 수 있는 고장 허용 기법을 제안한다. 제안한 시스템에서는 정확한 위치 파악이 힘들었던 기존 중앙 서버의 단점을 RFID 시스템과 홈로봇을 활용하여 극복하였다. 지정된 홈로봇은 각각의 싱글 로봇을 효율적으로 관리하며, RFID 태그의 위치 정보를 활용하여 각 싱글로봇에게 최적의 탐색 공간을 할당 한다. 제안하는 멀티로봇 관리 시스템은 공간 할당, 위치 추정 기법, 맵 생성 기법(Localization및 Mapping)을 효율적으로 수행하기 위해 RFID를 기반으로 하며, 싱글 로봇 시스템과 비교하여 시스템 운영의 효율을 극대화할 수 있을 뿐만 아니라 각 싱글 로봇의 상태와 주변 상태를 고려한 고장 허용(fault tolerance)을 제공함으로써 로봇 운영의 신뢰성을 보장할 수 있다. 본 논문에서는 시뮬레이션을 통해 제안한 시스템을 적용한 멀티로봇 시스템과 기존의 멀티로봇 시스템의 탐색 소요시간 및 중복 탐색율을 비교하여 제안한 시스템의 효율성을 입증하였다.

• 대한인간공학회지
• /
• 제7권2호
• /
• pp.31-44
• /
• 1988

If an error occurs in the automatic mode when the advanced teleoperator system performs a task in hostile environment then the automatic mode changes into the manual mode. The operation by the control program and the operation by a human recover the error in the manual mode. The system resumes the automatic mode and continues the given task. It is necessary to improve the manual mode in order to make the best use of a man-robot system, as a part of the human interface technique. Therefore, the error recovery task is performed by combining the operation by the control program representing autonomy of a robot and the operation by a human representing versatility of a human operator effectively in the view point of human factors engineering. The geometric inverse kinematics is used for the calculation of the robot joint values in the operation by the control program. The singularity operation error and the parameter operation error often occur in this procedure. These two operation errors increase the movement time of the robot and the coordinate reading time, during the error recovery task. A singularity algorithm, parameter algorithm and fuzzy control are studied so as to remove the disadvantages of geometric inverse kinematics. And the geometric straight line motion is studied so as to improve the disadvantages of the operation by a human.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.502-504
• /
• 2004

With rapidly growing of computer and internet technology, Internet-based tote-operation of robotic systems has created new opportunities in resource sharing, long-distance learning, and remote experimentation. In this paper, remote control system of a mobile robot through the internet has been designed. The internet users can access and command a mobile robot in the real time, receiving the robot's sensor data. The overall system has been tested and its usefulness shown through the experimental results.

• 대한기계학회논문집A
• /
• 제31권3호
• /
• pp.285-294
• /
• 2007

Previously, ASCI(Automation System for Curtain-wall Installation) which combined with a multi-DOF manipulator to a mini-excavator was developed and applied on construction site. As result, the operation by one operator and more intuitive operation method are proposed to improve ASCI's operation method which need one person with a remote joystick and another operating an excavator. The human-robot cooperative system can cope with various and untypical constructing environment through the real-time interacting with a human, robot and constructing environment simultaneously. The physical power of a robot system helps a human to handle heavy construction materials with relatively scaled-down load. Also, a human can feel and response the force reflected from robot end effecter acting with working environment. This paper presents the feasibility study regarding the application of the proposed human-robot cooperation control for construction robot through experiments on a 2DOF manipulator.

• 한국정밀공학회지
• /
• 제15권5호
• /
• pp.153-160
• /
• 1998

A master-slave system for tele-operation had been developed and tested for several decades. In this paper the master robot is composed of several wires and provides position information of the handle which is driven by a operator within the master robot work space. A PC is used for the command calculation for a slave robot. This paper deals with the relation between the number of strings and D.O.F of the master robot, control method of the slave robot during the operation and the monitoring method over the working area by the computer graphics simulation. The D.O.F of the master robot can be modified by adding or subtracting some strings. The controller of the slave robot uses the advanced PD control method to keep the performance against varying working load.

• 유공압시스템학회논문집
• /
• 제6권4호
• /
• pp.9-15
• /
• 2009

Hydraulic excavators are the representative of field robot and have been used in various fields of construction. Since the excavator operates in the hazardous working environment, operators of excavator are exposed in harmful environment. Therefore, the hydraulic excavator automation and remote operation system has been investigated to protect from the hazardous working environment. In this paper, remote operation excavator system is developed using the mini hydraulic excavator and the tracking control system of each links of excavator is designed. To apply the tracking control system, the adaptive sliding mode control algorithm is proposed. It is found that the performance of the proposed control system is improved through experimental results of using the remote operation excavator system.