• 한국정밀공학회지
• /
• 제25권9호
• /
• pp.45-52
• /
• 2008

As multiple functions arc required in a robot controller, RTOS(Real Time Operating System) should be adopted to manage complex situations, such as choosing most urgent task among competing ones. In this paper, we implemented RTAI(Real Time Application Interface) based robot controller for wafer handling robots including graphic simulator. We showed how multiple tasks are organized and also explained in detail about task priorities and execution periods. Finally, we presented simulation results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.106.1-106
• /
• 2002

$\textbullet$ Current status of reliability estimation techniques for robot systems $\textbullet$ Description of Bayesian Belief Nets(BBN) With an example $\textbullet$ Description of proposed reliability estimation method which combines all information necessary $\textbullet$ Application example of the method : the reactor inspection robot $\textbullet$ Results from the reliability estimation of reactor inspection robot $\textbullet$ Discussion on the proposed method (advantages and problems) $\textbullet$ Conclusion

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.138-143
• /
• 1989

In considering the singularities of robot, singularity avoidance control of robot wrist is very important. Because it is more difficult structurally to exclude the wrist singularity than the arm singularity. Since control policies with Jacobian may bring about mathematical singularities, control policies with Euler parameters that never cause mathematical singularities are necessary. In this research, singular status of robot wrist was analyzed and control algorithms for 3 and 4 axes robot wrist were proposed. Application results of the proposed control algorithms to the path including singularity showed us usefulness and validity.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.528-533
• /
• 1988

Recently the needs for industrial robot system of high speed continuous path motion such as sealing application have been increasing. To apply to this kinds of work, dynamic analysis for Hyundai 8601 robot has been carried out by experiment. For the good design of high performance robot manipulator, accurate analysis of dynamic characteristics is important especially for current semi-closed loop control type industrial robots.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.296-300
• /
• 1992

This paper deals with a dual mode control system design for the starching work robot. From the feature of this work, the robot has redundant degree of freedom. In this paper, we try to split the whole movement the robot into a gross motion part ai. a fine motion part so as to achieve a good tracking performance. The preview learning control is applied to the gross motion part. The validity of the dual mode control architecture is demonstrated.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 추계학술대회 학술발표 논문집
• /
• pp.180-186
• /
• 1998

This paper deals with the application of fuzzy Petri net to control the line tracking mobile robot. Comparing with the Petri net and the fuzzy Petri net, the fuzzy Petri net model is more effective than the use of Petri net, so the line tracking mobile robot has a little shake and also has a little moving distance than one of using the Petri, And thus the mobile robot shows less energy consumption

• 연구논문집
• /
• 통권24호
• /
• pp.13-26
• /
• 1994

The choice of design parameters for a robot arm depends on the desired workspace, load lifting capacity, application requirements, and the performance of the robot. The inverse process, which is the determination of a single robot's workspace for a given specification is also a common practice and is as important to the designers as it is to the users. Based on the geometric influence coefficients, the workspace areas on the vertical Y-Z plane are investigated and calculated. Using these areas, the effects of link parameters, link length ratios and joint rotation angles, are investigated.

• 정보교육학회논문지
• /
• 제16권2호
• /
• pp.265-273
• /
• 2012

현재 컴퓨터교육은 컴퓨터의 활용보다는 컴퓨터과학을 통한 창의성 신장 교육으로 비중을 높이고 있다. 이에 따라 창의성 교육의 측면에서 로봇을 활용하는 프로그래밍 교육은 컴퓨터교육 연구의 주요 과제로 떠오르고 있다. 로봇 프로그래밍에 관련된 기존 연구를 살펴보면 주로 로봇 프로그래밍 교육의 효과 및 교육과정 개발에 대한 연구가 주를 이루고 있으며, 점차 구체적인 학습 방법에 대한 연구로 초점이 이동되고 있는 추세이다. 본 연구에서는 로봇프로그래밍 학습 방법으로서 예제의 활용에 주목하고 있다. 예제는 프로그래밍을 가르치고 배우는데 중요한 역할을 하며, 학생과 교사 모두에게 유용한 유형의 학습 자료로 인식된다. 또한, 예제는 학습자가 프로그래밍을 할 때 기본틀, 가이드라인, 힌트 제공의 역할을 수행할 수 있다. 본 연구에서는 로봇 프로그래밍 교육을 위한 NXC 예제를 개발하고, 이를 학습자들이 쉽게 활용할 수 있는 지원 시스템을 개발하였다. 이 지원 시스템은 최근 관심이 집중되고 있는 스마트 교육의 동향에 따라 모바일 웹 애플리케이션으로 개발하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.252-254
• /
• 2004

This paper proposes a common platform for an internet-based mobile robot and its operator terminal. The common platform can reduce the cost and time to develop an internet-based robot and its operator terminal. The robot performs the role of a server and its terminal a client. One operator can use this terminal to make a command and this command can be sent to the robot through a wireless network. According to given commands, the robot moves a point and sends an image by using a camera or desired information by using other sensors. The information sent from the robot can help an operator to control the robot. The mobile robot consists of two modules, main module and motion module. Main module can exchange information with the operator terminal, process information, and send a command to motion module. Each application program for one internet-based mobile robot and its operator terminal will be developed to show that the same platform can be used for them. Also, it will be shown that the robot can be controlled easily by using its operator terminal.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1621-1623
• /
• 1997

Use of teaching pendant is the most widespread and economical way to teach desired motion to robots. It is also very primitive,time consuming and ineffective way of teaching which has not changed since the early days of robot. In order to reduce the teaching effor, a new efficient form of teaching is needed. Also, the recent robotics research trend into service robots such as home robot, nurse robot and medical robot calls for a new teaching method which is both easy and inexpensive. In this paper, the design and operation principle of a low cost force/moment sensor is presented. The proposed sensor architecture is so simple and inexpensive that it opens the prospect for a new paradigm of robot teaching which is easy and efficinet. Other prospective areas of application are tele-manipulation of robots wher it can be used in master arm, and virtual environment where it can be used as an user input device.