• Food Science and Preservation
• /
• v.22 no.2
• /
• pp.218-224
• /
• 2015

Crickets have been used as crude drug for treating fever and hypertension in East Asia. This study was carried out to investigate the quality characteristics such as the microbial and nutrient contents of crickets (Gryllus bimaculatus) prepared with various processing conditions for use as food. These conditions included the lyophilization process (LP), hot-air process (HP, $90^{\circ}C$ for 7 hr), roasting process (RP, $160^{\circ}C$ for 40 min), and frying process (FP, $180^{\circ}C$ for 30 sec). The total bacterial population of the crickets was 5~7 log CFU/g, but Coliform and E. coli were not detected. The major fatty acids in all the samples were palmitic acid (C16:0), oleic acid (C18:1), and linoleic acid (C18:2). The level of polyunsaturated fatty acids was highest (63.55 g/100 g) in the LP-processed crickets. As for the amino acid content, the glutamic acid level was highest in all the samples, and the RP and FP decreased by 12.01% and 53.88%, respectively, compared to that of the LP. The mineral contents were highest in the LP-processed crickets. Hg was detected at about 1.0 ppb in all the samples, but its level was lower than the residue tolerance level in the Korean Food Code. Such conditions should be considered to better understand the quality characteristics of crickets in food processing.

• Resources Recycling
• /
• v.31 no.2
• /
• pp.40-48
• /
• 2022

In this study, the effects of solution components were investigated in the recovery of vanadium as ammonium metavanadate from vanadium-ore-salt roasting-water leaching solution. The vanadium-containing solution is strongly alkaline (pH 13), so the pH must be lowered to 9 or less to increase the ammonium metavanadate precipitation efficiency. However, in the process of adjusting the solution pH using sulfuric acid, aluminum ions are co-precipitated, which must be removed first. In this study, aluminum was precipitated in the form of an aluminum-silicate compound using sodium silicate, and the conditions for minimizing vanadium loss in this process were investigated. After aluminum removal, the silicate was precipitated and removed by adjusting the solution pH to 9 or less using sulfuric acid. In this process, the concentration and addition rate of sulfuric acid have a significant influence on the loss of vanadium, and vanadium loss was minimized as much as possible by slowly adding dilute sulfuric acid. Ammonium metavanadate was precipitated using three equivalents of ammonium chloride at room temperature from the aluminum-free, aqueous solution of vanadium following the pH adjustment process. The recovery yield of vanadium in the form of ammonium metavanadate exceeded 81%. After washing the product, vanadium pentoxide with 98.6% purity was obtained following heat treatment at 550 ℃ for 2 hours.

• Journal of Conservation Science
• /
• v.29 no.1
• /
• pp.69-79
• /
• 2013

This study aims at identifying the variation of physicochemical properties for galena ore in order to use it in understanding of manufacturing techniques in terms of metallurgical method and smelting or refining process for obtaining lead. The ores in the study obtained from the operating mine have been washed and pre-treated for a test. Metallic lead has been extracted by roasting process. The result displays that galena is still in present in the matt despite of exposure to high temperature, over $1000^{\circ}C$. Nearly $11.1g/cm^3$ specific gravity metallic lead has been collected from the refining test of which aim was to remove the remnant galena and a trace of concentrated silver has been identified at the grain boundary. The result suggests that at least one refining process was essential to acquire high purity metallic lead and cupellation had been executed to remove remnant silver.

• Journal of Food Hygiene and Safety
• /
• v.25 no.4
• /
• pp.333-340
• /
• 2010

This study was conducted to evaluate the microbial contamination levels in the processing company of Nuroong-ji. Microbial contamination levels were examined for sanitary indication bacteria such as aerobic plate count, coliforms and fungi, and pathogenic bacteria such as Escherchia coli O157:H7, Salmonella spp., Staphylococcus aureus, and Listeria monocytogenes. Contamination levels were detected differently according to handling materials and purposing work-space. The equipments and raw materials were not seriously contaminated but there were necessary to attend the cross-contamination. A high contamination level was detected at the process where the interference of the employees was relatively higher than the other process. Standardization of the roasting process (l20~$170^{\circ}C$, about 10 min) could be necessary to control the microbial organism effectively on Nuroong-ji manufacturing process. At small/medium size foodstuff manufacturers, it is the most important to improve the recognition level of individual hygiene but also expand a hygiene facility.

• Resources Recycling
• /
• v.16 no.3 s.77
• /
• pp.3-11
• /
• 2007

Presently, most of gold is smelted from gold concentrates and anode slimes. Anode slimes are by-products of nonferrous smelters such as lead and copper. In addition, gold is recovered from waste dental and medical materials, waste gold coating solution, and waste printed circuit boards (waste PCBs). The smelting method of gold from gold concentrates and various wastes containing high concentration of gold is largely divided into chlorination, cyanidation, and amalgamation methods. For the anode slimes, electrolysis method is usually used, which largely consists of roasting, high temperature melting and electrolysis processes. Also, various wastes containing low concentration of gold are mainly treated by pyrometallursical processes. In the paper, current status on gold smelting technology is reviewed, and a novel process for gold smelting which is researched in the recent is briefly introduced.

• Resources Recycling
• /
• v.13 no.3
• /
• pp.50-57
• /
• 2004

Waste aluminum dross is a major waste in the aluminum scrap smelters and its components are mostly alumina and remained metallic aluminum. In the process to extract the remained aluminum from the waste dross by leaching with sodium hydroxide solution, residue is generated and its main component is alumina. This residue could be recycled into ceramic materials such as alumina castable refractories by going through a series of treatments such as washing, drying and roasting. In this study, a pilot plant was constructed and tested to demonstrate the developed technology. One thousand tons of waste aluminum dross could be processed, and about seven hundred tons of ceramic materials produced in the demonstration line. From the test run of the pilot plant, although it was confirmed that the developed technology could be applied to commercialization, several technical improvements were found to be necessary for reducing impurities such as Na, Fe and for reforming drying equipment.

• Korean journal of food and cookery science
• /
• v.22 no.3 s.93
• /
• pp.299-306
• /
• 2006

The numerous varieties of coffee beans contain a wide range prices and qualities. While the varieties of green coffee beans can generally be distinguished by their appearance, this visual criterion is impossible after the roasting process. Therefore, we need to develop a classification method or device. In this study, the potential of a new type of electronic nose, fast gas chromatography based on a surface acoustic wave sensor(SAW), was evaluated for the classification of origins and blended commercial brands in roasted coffee beans. Eight blended commercial brands and the origins of four similarly roasted ground coffee beans(with no significant difference of color) were rapidly(90 sec/sample) classified. The reproductive results were easily understandable over the aroma image pattern by $VaporPrint^{TM}$. In conclusion, GC-SAW electronic nose can be applied to the classification of origins and commercial brands in roasted ground coffee beans and to e evaluation of the similarities and differences of volatile pattern between samples.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.3
• /
• pp.435-446
• /
• 2012

The present study identified volatile flavor components of Hanwoo longissimus muscle and other Korean foods (Doenjang, Chungukjang, sesame oil) and their traits were compared in relation with flavor precursors that include fatty acids and protein degradation products. Hanwoo longissimus muscle was purchased from a commercial abattoir while the other foods were sampled from three separate households. The results showed totals of 68 ($9.94{\mu}g/g$), 60 ($15.75{\mu}g/g$), 49 ($107.61{\mu}g/ml$) and 50 ($7.20{\mu}g/g$) volatile components for Doenjang, Chungukjang, sesame oil and Hanwoo beef longissimus, respectively (p<0.05). Aldehydes were the most predominant components in beef, but alcohols, acids and esters, and pyrazines are probably the major contributors to the flavor characteristics of other foods. SDS-PAGE revealed that beef longissimus muscle and Doenjang showed higher protein degradation than other foods which could be likely related to chiller ageing and ripening process. The total polyunsaturated fatty acids were approximately 50, 60, 41 and 5% for Doenjang, Chungukjang, sesame oil and beef longissimus muscle, respectively. Based on the mechanism(s) of generation of the volatile compounds and the chemical composition of each food sample, differences and traits of volatile flavor components among the four food types are likely due to fatty acid profiles, proteolytic activity and processing conditions. Aroma intense compounds like pyrazines and sulfur-containing compounds were limited in cooked beef in the current experimental condition (i.e., relatively low heating temperature). This suggests that higher heating temperature as in the case of roasting is needed for the generation of high aroma notes in meat. Furthermore, proteolytic activity and stability of fatty acids during ageing have a great influence on the generation of flavor components in cooked beef.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.5
• /
• pp.469-476
• /
• 2018

The purpose of this study was to collect basic data that could be used in the manufacture of two kinds of canned oyster Crassostrea gigas. The steamed oyster was prepared by shucking after boiling for 6 min at $105^{\circ}C$ and then washing and dewatering. The roasted oyster was prepared by baking steamed oyster at $140^{\circ}C$ for 20 min. The manufacturing methods of canned seasoned boiled oyster and canned seasoned roasted oyster were as follows. The boiled or roasted oyster (50 g) was added to a can (RR-90) along with a mixture of seasoning sauce 40 and then seamed using a vacuum seamer under 20 cm Hg after pre-exhausting at $90^{\circ}C$ for 20 min. The two kinds of canned oyster products produced under sterilization of Fo 12 min were tested for cultured bacteria, external appearance, proximate composition, pH, VBN (Volatile basic nitrogen), TBA (Thiobarbiuric aicd) value, amino-N, salinity, color value sensory evaluation, etc. Results showed that the canned seasoned roasted oyster had higher overall acceptability than the canned seasoned boiled oyster. The reason for this was judged to be that the process of roasting at $140^{\circ}C$ for 20 min influenced the sensory evaluation.

• Journal of the Korean Society of Food Culture
• /
• v.10 no.4
• /
• pp.291-300
• /
• 1995

The purpose of this paper is to survey various recipes of the roasted beef with twenty three classical cookboods written before 1943. The roasted beefis found total 32 times in the literature which can be classified into seven groups such as the roasted rib, roasted foot, roasted tail, roasted heart, roasted gall, roasted kidney and roasted fresh meat. The most frequent one is the roasted rib appearing eight times and the next is the roasted sliced beef with seasoning appearing seven. This proves that the those recipes have been the most favorite ones to Korean people for a long time. The roasted rib has been found since the middle of the 17th century, but the process of roasting ribs again with seasoning after three successions of dipping shortly into cold water in the midst of roast wasz disappeared. The roasted sliced beef with seasoning originated since the late 18th century, and the roasted beef with salt since the early 19th century which has been inherited as the roasted raw upper part of roasted beef recipes have been continued until today in the similar manner. Generally the roasted meat with bones and the roasted internal organs started in 1766 earlier than the roasted fresh meat by a century. The main ingredients were rib, foot, tail, heart, gall, kidney, fresh meat and knee bone, and the seasonings were mixtures of scallion stalk, garlic, pepper, oil, soy sauce and sesame seed powder. And peculiarly salted shrimp, pear juice, ginger were added to seasonings and pine nut powder was used as decorating ingredient.