• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.346-353
• /
• 2000

The benefit of reinforced roadbeds, such as roadbed reinforced with slag and roadbed with crushed stone has been known among engineers. In this study, model soil box test is executed to determine optimum roadbed thickness. As a result, a empirical solution for the settlement of reinforced roadbeds was suggested. Furthermore, optimum thickness of reinforced roadbed could be determined based on the settlement characteristic of reinforced roadbed among the several variables.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1242-1247
• /
• 2007

An active application of concrete track is being expected for the future constructions of Korea railroad. For the successful construction and design in embankment section, the roadbed behavior should be reasonably estimated using the proper analysis method. In this research, behaviors of reinforced roadbed constructed with the determined stiffness and thickness at embankment section were estimated through various design parameters and numerical analysis. A three dimensional finite element method was employed to determine the proper reinforced roadbed thickness at embankment section. The displacement and vertical stress caused by train loading were estimated and compared with the field test results. The bearing characteristics of concrete track roadbed were presented. Moreover, the method to determine thickness of reinforced roadbed was proposed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1747-1755
• /
• 2008

Design of the reinforced roadbed thickness is concerned with safe operation of trains at specified levels of speed, axle load and tonnage. There are two methods for evaluating it. One is using an experimental equation and the other is using elastic theory with considering axle load, material properties of subsoils and allowable elastic settlement. Multi-layered theory is used to determine reinforced roadbed thickness by RTRI. Although their reinforced roadbed thickness is designed with an objective of achieving a minimum standard 2.5mm of settlement on the subgrade surface, it is hardly applied to real design. Li(1994) has suggested the experimental model which design approach is to limit plastic strain and deformations for the design period. It is worth due to adopting soil equivalent number of repeated load application. Moreover, it has been a more advanced method than existing design methods because including resilient modulus of subsoil beneath track, soil deviator stress caused by train axle loads and MGT. In this paper, it is analyzed under domestic track conditions to estimate the reinforced roadbed thickness with different soil types.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.3166-3171
• /
• 2011

The design standard for the thickness of reinforced roadbed is divided into high-speed and conventional railroad because dynamic characteristics of train loadings differ depending on the train speed. Due to the national plan for increasing the train speed for both conventional and new railroad lines, it is necessary to examine the applicability of concrete tracks and feasibility of the train speed increase on the conventional lines with the current thickness of the reinforced roadbed. In this study, a real-scale test was performed to monitor the dynamic characteristics of the reinforced roadbed with a thickness of 20cm and the train speed of 200km/h, 300km/h, and 400km/h. The test results were then compared with the design code to investigate the applicability of the conventional reinforced roadbed when the trains operate with higher speed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.525-532
• /
• 2001

In this study, performance of reinforced railroad roadbeds with the crushed stones was investigated through the real scale railroad roadbed tests. Several real scale reinforced railroad roadbeds were constructed in the laboratory with different subgrade conditions and were tested with the estimated actual train loads including the impact loading of train. The affecting factors such as settlement, earth pressure and stress change at the surface of reinforced roadbed, subgrade layers as well as surface of rails were measured. It was found through the actual testing that for the roadbed with the same thickness, the settlement and vibration level (velocity) of reinforced roadbed decreases with the increase of reaction modulus of subgrade. The settlement of reinforced roadbed with the same reaction modulus of subgrade also decreases with the increase of thickness of the reinforced roadbed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 춘계학술대회 논문집
• /
• pp.613-618
• /
• 2006

• 한국지반공학회논문집
• /
• 제20권2호
• /
• pp.5-13
• /
• 2004

기존의 흙을 사용하여 건설된 철도 노반은 반복적인 교통하중의 증가, 열차속도의 향상, 노반상으로의 지하수의 유입, 노반의 배수능력 저하 등의 이유로 인해 시간경과에 따라 쉽게 그 기능을 상실할 수 있다. 본 연구에서는 실대형시험과 수치해석을 수행함으로씨 철도노반으로서의 쇄석강화노반의 성능을 평가하였다. 쇄석강화노반의 탄$.$소성 연직변위는 모사열차하중의 재하횟수에 관계없이 일반 흙노반에 비해 작은 응답특성을 보였으며, 동일한 노반 부설두께에서는 노반반력계수의 증가에 따라 감소하며, 동일한 강성인 경우 노반 부설두께 증가에 따라 감소하는 경향을 보였다. 하지만, 쇄석강화노반의 부설두께에 비해 노반의 강성이 궤도에 발생하는 전체 소성 연직변위에 더욱 큰 영향을 미치는 것으로 평가되었다.

• 한국철도학회논문집
• /
• 제12권6호
• /
• pp.835-843
• /
• 2009

최근 철도의 고속화 및 중량화로 인하여 보다 안정적인 토공노반 구조가 요구된다. 그 대안으로 강화노반이 도입되어 적용하고 있다. 하지만 현 설계기준에 적용되어진 콘크트궤도 강화노반의 강성 및 두께는 국내의 지반의 특성 및 공학적인 평가 없이 외국의 기준을 임의적이고 보수적으로 결정하고 있다 따라서 본 논문에서는 콘크리트궤도 흙쌓기 구간에서의 강화노반 두께를 합리적으로 결정하기 위하여 국내 시공조건을 고려, 적정 탄성계수, 배수성능, 동결심도, 경제성, 지지력 등을 검토하고 이를 바탕으로 유한요소해석을 실시하여 적정 두께를 제시하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.423-429
• /
• 1999

The design method of Geosynthetics reinforced Railway Roadbed that was developed in Germany in 1997 is presently putting into practice. This method insists that Railway Roadbed Thickness has to be measured by Frost and Bearing Capacity The Maximum Value from the above two measurements is the necessary Railway Roadbed Thickness. This design method has many kinds of advantage in economic, constructive aspect, and environmentalism. Recently a few Korean experts actively have researched on this area, but their results are not enough for proper design method. Ⅰ hope more complete study on this area will be progressed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1827-1832
• /
• 2007

The purpose of a railway track is to provide a smooth surface for safe and economical train transportation. The performance of the track results from a complex interaction of the track and subgrade components in response to train loading and environmental actions. In the past, the role of subgrade as the track foundation were not recognized adequately. There are insufficient information and inadequate methods for subgrade design, assessment and improvement. This situation has survived for a long time largely because a subgrade defect can often be adjusted by adding more ballast under the ties or applying more frequent track maintenance. Therefore, the application of reinforced roadbed technology will be expected to increase in the future. The reinforced roadbed thickness is set depending on subgrade reaction modulus$(K_{30})$ in the condition of upper subgrade through PBT in both conventional railroad and KTX railroads. As train velocity (V), train passing tonnage (N), and train axial load (P) are not considered in design, the roadbed thickness could be overestimated (or underestimated). Therefore, In this study, the computer model, GEOTRACK, was analyzed the influence of reinforced roadbed thickness factors on track modulus and the characteristics of stress pulses in track and subgrade generated by repeated axle loading.