• Journal of Korean Society of Transportation
• /
• v.35 no.2
• /
• pp.116-128
• /
• 2017

Traffic accidents can be defined as a physical collision event of vehicles occurred instantaneously when drivers do not perceive the surrounding vehicles and roadway environments properly. Therefore, detecting the high potential events that cause traffic accidents with monitoring the interactions among the surroundings continuously by driver is the prerequisite for prevention the traffic accidents. For the analysis, basic data were collected to analyze interactions using a test vehicle which is equipped the GPS(Global Positioning System)-IMU(Inertial Measurement Unit), camera, radar and RiDAR. From the collected data, highway geometric information and the surrounding traffic situation were analyzed and then safety evaluation algorithm for driving vehicle was developed. In order to detect a dangerous event of interaction with surrounding vehicles, locations and speed data of surrounding vehicles acquired from the radar sensor were used. Using the collected data, the tangent and curve section were divided and the driving safety evaluation algorithm which is considered the highway geometric characteristic were developed. This study also proposed an algorithm that can assess the possibility of collision against surrounding vehicles considering the characteristics of geometric road structure. The methodology proposed in this study is expected to be utilized in the fields of autonomous vehicles in the future since this methodology can assess the driving safety using collectible data from vehicle's sensors.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.2
• /
• pp.58-76
• /
• 2019

As the number of reported injuries has tended to increase over time, large hospitalization expenditure from excessive medical treatments and hospitalization, and insurance frauds associated with moral hazard in minor collisions have caused a global societal problem. Many occupants of rear-ended vehicles involved in rear-end collisions complain of whiplash injury, which is also known as neck injury, without any anatomical and radiological evidence. With only clinical symptoms, stating that a whiplash injury is a type of injury defined by the Abbreviated Injury Scale would be difficult. Therefore, this study focuses on minor rear-end collisions, where the rear-ender vehicle collides with the rear-ended vehicle at rest. The mathematics dynamic model is employed to simulate a total of 100 rear-end collision scenarios based on various weights and collision speeds and identify how the weights and speeds of both vehicles influence the risk of whiplash injury in occupants involved in minor rear-end collisions. The possibility of an injury is very high when the same-weight vehicles are involved in accidents at collision speeds of 15 km/h or higher. The possibilities are 36% and 84% with collision speeds of 15 km/h and 20 km/h, respectively, if weights are disregarded.

• Journal of Korean Society of Transportation
• /
• v.22 no.4 s.75
• /
• pp.147-158
• /
• 2004

A class of SWP(Stochastic Wane Propagation) models microscopically mimics individual vehicles' stochastic behavior and traffic jam propagation with simplified car-following models based on CA(Cellular Automata) theory and macroscopically captures dynamic traffic flow relationships based on statistical physics. SWP model, a program-oriented model using both discrete time-space and integer data structure, can simulate a huge road network with high-speed computing time. However, the model has shortcomings to both the capturing of low speed within a jam microscopically and that of the density and back propagation speed of traffic congestion macroscopically because of the generation of spontaneous jam through unrealistic collision avoidance. In this paper, two additional rules are integrated into the NaSch model. The one is SMR(Stopping Maneuver Rule) to mimic vehicles' stopping process more realistically in the tail of traffic jams. the other is LAR(Low Acceleration Rule) for the explanation of low speed characteristics within traffic jams. Therefore, the CA car-following model with the two rules prevents the lockup condition within a heavily traffic density capturing both the stopping maneuver behavior in the tail of traffic jam and the low acceleration behavior within jam microscopically, and generates more various macroscopic traffic flow mechanism than NaSch model's with the explanation of propagation speed and density of traffic jam.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.9 s.351
• /
• pp.60-68
• /
• 2006

Using the wireless communication among unacquainted vehicles, an intelligent vehicle safety system can be constructed to exchange vehicle safety-related information, such as urgency stop, traffic accident and road obstacles. In the majority of vehicle safety applications, vehicle safety messages are propagated in the form of broadcast. However, this approach causes some effectiveness and performance problems with massive radio collision, multi-hop propagation. This paper presents a priority based relay node selection method for propagating vehicle safety messages of traffic accident protection system. With this method, vehicle safety messages are relayed by a node that locates in proper distance out of the nodes that are included in the radio transmission range. By decreasing the number of duplicated messages, the packet overhead is lessened while the communication performance is raised. The proposed method was proven to be better than other schemes through network simulations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.577-586
• /
• 2018

In this study, traffic safety technology was developed for rural areas by reviewingthe relevant literature and data from the Traffic Accident Analysis System for the Chungcheong region.The goal is to reduce traffic accidents in small regional cities and rural areas in Korea. A road shoulder recognition light was developed to fit the pedestrian characteristics of the people using transportation in rural areas. It also minimizes damage to crops due to light pollution from traffic lights and street lights, and it supplements problems of damage from collision with vehicles and agricultural machines. The efficiency of the technology developed in this study was verified by comparing and analyzing the number of traffic accidents and the saved cost before and after its installation. A test bedwas established based on rural areas and is being evaluated for its applicability and effectiveness. It is expected that the reliability of such facilities could be improved through continuous studies, data collection, and analysis.

• Journal of Korean Society of Transportation
• /
• v.26 no.2
• /
• pp.47-56
• /
• 2008

Two-Lane Highway of Korea is important, Because it has the largeest portion of all roads of Korea. But it has only one lane for one direction. So, If Delays are happened by low-speed vehicles, high-speed vehicles should over-take through the other side of the road. This over-takings can generate the high possibility of traffic accidents and the severity of traffic accidents by over-takings is very high. Because it generates a head-on collision. But the level of Service that indicates the operation states of Two-Lane Highway is defined as a conception that explains the operation conditions of traffic safety etc. Whencalculating the Level of service. It is considered by only delays. So, in this paper, first, this author wants to present the calculation of delay-time by Total-Delay Rate. Second, by multiplying this delay-time by the costs of delays wants to present the method of calulates the total delay costs. Third, to consider the traffic accidents, After predicting the number of traffic accidents, As multipling this by the average of costs of traffic accidents. want to present the method to calculate Total traffic accidents costs. Forth, present the operation costs.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.5
• /
• pp.465-472
• /
• 2016

Objective:This study is on the characteristics of motorcycle accidents occurring in the mail delivery process by skill level. Background: The tendency of delivery postmen's driving in a hurry may become the cause of accidents since there is a constraint that delivery should be completed within a limited time. Method: This study analyzed the traffic accident data of 259 delivery postmen, who had been approved as occupation-related industrial accident victims from 2009 to 2012, by their work experience in view of season, day of the week of an accident occurrence, accident occurrence time, accident cause, collision type, and driving situation. Results: Accident characteristics of delivery postmen show that the ratio of accidents occurring to those who had less than 10 years of work experience was high. There were many motorcycle collisions in winter and summer by season and an unexpected object, along with road condition, took up 70.7% of the accident sources. There were no differences in accident occurrence time, the day of the week, season, accident source, and collision type between the group of delivery postmen with less than 10 years of work experience and those with 10 years or more of work experience. However, there was a difference in distribution of driving condition. Conclusion and Applications: The results of this study can be used to present the policies or guidelines for the accident prevention of delivery postmen since the results show the characteristics of the injured and accident occurrence characteristics in relation with the delivery postmen's motorcycle collisions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.424-430
• /
• 2021

Determining the cause of a traffic signal violation is difficult if the drivers' claims are contradictory. In this study, the process of identifying signal violations using a simulation was presented based on cases. First, statements from the driver or witness whose cause of the signal violation is unclear were excluded. Second, the final position, final location, damaged area, steering status, braking status, and road surface traces of the vehicle were collected. The impact point was investigated from the stop line. Third, simulation data were modified and entered until the collision situation of the accident vehicle and the final stop position were met. Fourth, if the simulation results were consistent with the crash situation, the facts were verified by cross-validation to conform to the driver's statement. The results of the simulation showed that the Lexus entered the left turn signal in the intersection at approximately 55 km/h. In comparison, the Sonata driver saw the vehicle straight ahead at the intersection, entered the 72 km/h intersection, and collided with the Lexus. Therefore, the Sonata was identified as a signal violation, and the claims of the Sonata driver, witnesses, and police were contradictory.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.4
• /
• pp.115-120
• /
• 2008

The fatalities of pedestrian accounted for about 40.0% of all fatalities in Korea (2005 year). In pedestrian involved accident, the most important data to inspect accident is throw distance of pedestrian. The throw distance of pedestrian can be influenced by many variables, such as vehicular frontal shape, vehicular impact speed, the offset of impact point, the height of pedestrian, and road condition. The trajectory of pedestrian after collision can be influenced by vehicular frontal shape classified into sedan type, box type, SUV type and van type. Many studies have been done about pedestrian accident with passenger car model and bus model for simple factors. But the study of pedestrian accident by van type vehicle was much insufficient, and even that the influence of multiple factors such as the offset of impact point was neglected. In this paper, a series of pedestrian kinetic simulation were conducted to inspect relationship between throw distance and multiple factors with using PC-CRASH s/w, a kinetic analysis program for a traffic accident for van type. By based on the simulation results, multi-variate regression was conducted, and regression equation was presented.

• Journal of the Society of Disaster Information
• /
• v.12 no.3
• /
• pp.279-285
• /
• 2016

Road sides safety barrier system is the last safety during traffic accident. The structural performance of a roadside safety barrier should be kept above expectations. It is possible to protect the passenger's life. End treatment part is installed in the end of the barrier it prevents a phenomenon in which for the vehicle for the guardrail during a vehicle collision it is facility of the absorbing of car crashed impact. By repeated analysis through computer simulation for improving the vehicle crash it will be able to develop crash barriers to respond appropriately to various parameters.