• Atmosphere
• /
• v.24 no.4
• /
• pp.471-479
• /
• 2014

A road surface temperature prediction model (UM-Road) using input data of the Unified Model (UM) output and road physical properties is developed and verified with the use of the observed data at road weather information system. The UM outputs of air temperature, relative humidity, wind speed, downward shortwave radiation, net longwave radiation, precipitation and the road properties such as slope angles, albedo, thermal conductivity, heat capacity at maximum 7 depth are used. The net radiation is computed by a surface radiation energy balance, the ground heat flux at surface is estimated by a surface energy balance based on the Monin-Obukhov similarity, the ground heat transfer process is applied to predict the road surface temperature. If the observed road surface temperature exists, the simulated road surface temperature is corrected by mean bias during the last 24 hours. The developed UM-Road is verified using the observed data at road side for the period from 21 to 31 March 2013. It is found that the UM-Road simulates the diurnal trend and peak values of road surface temperature very well and the 50% (90%) of temperature difference lies within ${\pm}1.5^{\circ}C$ (${\pm}2.5^{\circ}C$) except for precipitation case.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4D
• /
• pp.473-481
• /
• 2009

This research developed integrated service assessment index on satisfaction with road use in consideration of not only quantitative parts, such as the existing traffic speed and delay but also qualitative parts, such as traffic information and traffic safety, etc. The newly devised assessment index developed assessment items and weight using ANP analysis method through the existing research results and questionnaire survey on traffic experts and road users. To verify the developed assessment index, this research measured the feeling degree of road users in time of their driving and analyzed the reasons using the brain waves tester; as an analysis result, the speed shown in the existing assessment index was found to have a 35% effect and further, the factors, such as traffic safety and traffic information were also found to have a lot of effects on the road $users^{\circ}{\emptyset}$ feeling degree. Accordingly, the integrated assessment index suggested by this research has its significance in that it is available to assessment in view of users rather than the existing satisfaction with the service in road use, and this index was developed to reflect the needs of the times, such as a fine view of roads, traffic information, and traffic safety.

• 한국도로학회:학술대회논문집
• /
• 2009.11a
• /
• pp.703-710
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.265-268
• /
• 1997

In the recent day, fatigue life prediction techniques play a major role in the design of components in the ground vehicle industry. Full scale durability testing in the laboratory is an essential of any fatigue life evaluation of components or structures of the automotwe vehicle. Component testing is part~cularly important in today's highly competitive industries where the design to reduce weight and production costs must be balanced with the necessity to avoid expensive service failure. Generally, multi-axial road simulator is used to carry out the fatigue test and the vibration test. In this paper, the algorithm and software to realize the real road profile are developed. The validity of the software are verified by applying the belgian road, the city road, the highway, and the gravel road. The results of the above experiment show that the real road profiles are realized well after loth iteration.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.443-446
• /
• 2008

전국의 주요 도로에 센서를 설치하여 교통정보를 수집하고 가공하여, 사용자인 일반 국민, TSP, 공공기관들에게 양질의 교통정보를 제공하기 위한 교통정보 수집/제공시스템의 데이터 연계/통합 모델을 제안하였다. 제안된 모델은 기존에 구축되어 있는 교통정보센터를 연계/통합하기 위하여 향상된 EAI 기술과 교통정보 교환기술 표준을 적용하여 서버간의 효율적인 통신을 가능하게 해준다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.19-33
• /
• 2019

There have been enormous efforts to develop an innovative public transport bus service for enhancing its operational efficiency based on Automated Vehicle(AV). However, since the vehicle operating environment in the public transport system varies with the purpose and method of mobility service, it is necessary to preferentially evaluate the current roadworthiness for an effective way to introduce the AV. Therefore, this study classified and redefined AV-based mobility service based on literature reviews. This research conducted the roadworthiness test for checking the feasibilities of the AV-based mobility services. Furthermore, we suggested some deployment strategies of the AV-based mobility service considering the Level-Of-Service (LOS) of road infrastructure based on the results of roadworthiness tests. The proposed direction would have a great potential to introduce the AV-based public transport system in the near future.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.4
• /
• pp.112-123
• /
• 2018

The C-ARS(Cooperative Automated Roadway System) refers to a road infrastructure system that links automated vehicles with road infrastructure and communicates with each other via V2X communication to support automated vehicles. The purpose of this study is to suggest a performance evaluation method of C-ARS service. This study exemplifies the 'Work zone information service' among I2V service that provide information to automated vehicles in road infrastructure. First, we define the requirements and service scope needed to check the use case analysis and service performance of the service, and propose an evaluation system for performance evaluation of these services. In addition, the evaluation system was used to verify the feasibility of evaluation through the field test of 'Work zone information service'.

• Journal of the Korea Society for Simulation
• /
• v.19 no.2
• /
• pp.137-145
• /
• 2010

This study presents an RTS(Real-time Traffic System) based on an LBS(Location Based Service) using 5.8~5.9GHz RSU(Road Side Unit). The proposed LBI(Location based Broadcast system on ITS) is a local information-based service supported by RSU for drivers, which has a feature of convergence between T-DMB system and ITS-based RTS. The convergence of local broadcasting station and ITS is realized by two-way communication and supports LBS(Location Based Service) by identifying of vehicle's location using RSU. Real-time information delivery and various services could be provided by information exchanges between LMM and local broadcasting stations. Furthermore, conventional technical limitations have been solved mutually such as transmission area limitation in RTS and one-way communication problem in T-DMB. This support real-time two-way communication to each driver. Therefore, it can be expected that traffic dispersion effects and services expansion for drivers by RTS and LBI. Finally, it is proposed to built and implement test-bed around institute.

• KIISE Transactions on Computing Practices
• /
• v.24 no.2
• /
• pp.59-66
• /
• 2018

In this paper, we propose a system to detect various damage automatically inflicted on road pavement by collecting and analyzing data from acceleration and camera sensors in real time. The proposed system sends the collected images, acceleration signals, and GPS coordinates to the road manager and the database in the remote server, shortly after detecting the damage to the road pavement. Our study makes three key contributions. The proposed system 1) enables road managers to maintain road conditions quickly, accurately, and conveniently; 2) allows road mangers to take care of various kinds of damage to the road pavement at the initial stage; and finally 3) even makes it possible to track the damage, which suggests that the integration of a high-level decision support function becomes affordable. We tested the sensitivity and precision of the proposed system against real-time data obtained from the vehicles driving on the highway at an average speed of 100 km/h. With ten iterations, the proposed system achieved an average sensitivity of 74% and an average precision of 84% in road pavement damage detection, which is comparable with the best competing schemes.

• Journal of Korean Society of Rural Planning
• /
• v.16 no.3
• /
• pp.131-141
• /
• 2010

As a basic life-supporting infra in modem life, road should carry out various functions; transport, public linear network service, open activity space. Case study villages were divided into plan-based improved one(3 subtypes) and not one(4 subtypes). On total 21 case study villages($3{\times}7$ subtypes), questionnaire surveys were performed. Villagers' satisfaction level to road conditions in the plan-based improved villages showed much higher than not improved ones, which means that improvement of village roads be a vital subject in level-up of quality of rural life. Traffic function of village roads was responded as a principal one, while other various functions as between-villagers communication, car-parking and accommodation of public utilities were also required. In this viewpoint, village roads should be multi-purposedly developed in future. So, it was concluded that the road improvement strength would vary with geographical and topographical conditions of each village. Although villagers' unsatisfaction level on road service was very high, their demand level of and supporting will toward road improvement works have continuously increased, so, it would be considered to be the very time that full-fledged village road improvement policy be initiated.