• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.97-105
• /
• 2015

PURPOSES : The Toll Collection System (TCS) operated by the Korea Expressway Corporation provides accurate traffic counts between tollgates within the expressway network under the closed-type toll collection system. However, although origin-destination (OD) matrices for a travel demand model can be constructed using these traffic counts, these matrices cannot be directly applied because it is technically difficult to determine appropriate passenger car equivalent (PCE) values for the vehicle types used in TCS. Therefore, this study was initiated to systematically determine the appropriate PCE values of TCS vehicle types for the travel demand model. METHODS : To search for the appropriate PCE values of TCS vehicle types, a traffic demand model based on TCS-based OD matrices and the expressway network was developed. Using the traffic demand model and a genetic algorithm, the appropriate PCE values were optimized through an approach that minimizes errors between actual link counts and estimated link volumes. RESULTS : As a result of the optimization, the optimal PCE values of TCS vehicle types 1 and 5 were determined to be 1 and 3.7, respectively. Those of TCS vehicle types 2 through 4 are found in the manual for the preliminary feasibility study. CONCLUSIONS : Based on the given vehicle delay functions and network properties (i.e., speeds and capacities), the travel demand model with the optimized PCE values produced a MAPE value of 37.7%, RMSE value of 17124.14, and correlation coefficient of 0.9506. Conclusively, the optimized PCE values were revealed to produce estimates of expressway link volumes sufficiently close to actual link counts.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.479-484
• /
• 2003

In the case of the feeder bus route choice, it is more desirable to choose the route by treating as a single route linked from origin to destination than the whole network. This study is to establish a concept that frames the feeder bus route choice technique for the change of the existing single bus route or the creation of the new feeder bus route. The concept of the feeder bus route choice technique in this study is not to frame the whole bus network but to frame a single route to a unit O-D pair. So, this study has the assumption that does not consider the waiting and transfer time at the bus stop. This system technique consists of the following phases: I) limitation of the road network examined for the study, ii) enumeration of the appropriate candidate routes by the permissive route length, and iii) determination of the optimum bus route by the route evaluation value.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.11
• /
• pp.76-88
• /
• 1998

While most of the research on reinforcement learning assumed a discrete control space, many of the real world control problems need to have continuous output. This can be achieved by using continuous mapping functions for the value and action functions of the reinforcement learning architecture. Two questions arise here however. One is what sort of function representation to use and the other is how to determine the amount of noise for search in action space. The ubiquitous neural network is used here to learn the value and policy functions. Next, the reinforcement predictor that is intended to predict the next reinforcement is introduced that also determines the amount of noise to add to the controller output. The proposed reinforcement learning architecture is found to have a sound on-line learning control performance especially at high-speed road following of high curvature road. Both computer simulation and actual experiments on a test vehicle have been performed and their efficiency and effectiveness has been verified.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.479-487
• /
• 2004

The Korean railroad has developed as a foundation of nation's nucleus network. Nowadays Korea has entered into a new era because of the operation of KTX(Korea Train Express). As an introduction of KTX, the Korean railroad system has advanced Korean style high speed rail(HSR-350x), which is based on transfer and own technology. It is expected that the Korean rail road system has the leading design and production ability. Korea is planning to develop its own high speed railroad system until 2007. So the present task is to initiate a strategic export method for the development and value-added of Korean high speed railroad system. Furthermore this study proposes the administrative and technical policy for the basic technical research and creativeness predominance.

• Advances in Energy Research
• /
• v.5 no.2
• /
• pp.147-177
• /
• 2017

This study aims to evaluate and prioritize ten different sites in Iran's Khorasan provinces for the construction of wind farm. After studying the geography of the sites, nine criteria; including wind power, topography, wind direction, population, distance from power grid, level of air pollution, land cost per square meter, rate of natural disasters, and distance from road network-are selected for the analysis. Prioritization is performed using data envelopment analysis (DEA). The developed DEA model is validated through value engineering based on the results of brainstorming sessions. The results show that the order of priority of ten assessed candidate sites for installing wind turbines is Khaf, Afriz, Ghadamgah, Fadashk, Sarakhs, Bojnoord, Nehbandan, Esfarayen, Davarzan, and Roudab. Additionally, the outcomes extracted from the value engineering method identify the city of Khaf as the best candidate site. Six different wind turbines (7.5 to 5,000 kW) are considered in this location to generate electricity. Regarding an approach to produce and store hydrogen from wind farm installed in the location, the AREVA M5000 wind turbine can produce approximately $337ton-H_2$ over a year. It is an enormous amount that can be used in transportation and other industries.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.12
• /
• pp.2779-2784
• /
• 2015

The prediction of the accurate traffic information can provide an optimal route from the place of departure to a destination, therefore, this makes it possible to obtain a saving of time and money. To predict traffic information, we use a Bayesian network method based on probability model in this paper. Existing researches predicting the traffic information based on a Bayesian network generally used to study the data for all time. In this paper, however, only data corresponding to same time and day of the week to predict selectively will be used for learning. In fact, the experiment was carried out for 14 links zone in Seoul, also, the accuracy of the prediction results of the two different methods should be tested with MAPE (Mean Absolute Percentage Error) which is commonly used. In view of MAPE, experimental results show that the proposed method may calculate traffic prediction value with a higher accuracy than the method used to learn the data for all time zones.

• International Journal of Highway Engineering
• /
• v.18 no.2
• /
• pp.91-101
• /
• 2016

PURPOSES : The aim of this study was to compare the performance of the QUEENSOD method and the gravity model in estimating Origin-Destination (O/D) tables for a large-sized microscopic traffic simulation network. METHODS : In this study, an expressway network was simulated using the microscopic traffic simulation model, VISSIM. The gravity model and QUEENSOD method were used to estimate the O/D pairs between internal and between external zones. RESULTS: After obtaining estimations of the O/D table by using both the gravity model and the QUEENSOD method, the value of the root mean square error (RMSE) for O/D pairs between internal zones were compared. For the gravity model and the QUEENSOD method, the RMSE obtained were 386.0 and 241.2, respectively. The O/D tables estimated using both methods were then entered into the VISSIM networks and calibrated with measured travel time. The resulting estimated travel times were then compared. For the gravity model and the QUEENSOD method, the estimated travel times showed 1.16% and 0.45% deviation from the surveyed travel time, respectively. CONCLUSIONS : In building a large-sized microscopic traffic simulation network, an O/D matrix is essential in order to produce reliable analysis results. When link counts from diverse ITS facilities are available, the QUEENSOD method outperforms the gravity model.

• Spatial Information Research
• /
• v.20 no.5
• /
• pp.77-89
• /
• 2012

Walking is the most basic personal mobility and its importance and concern is ever increasing with the highlighting of a new paradigm, such as transit oriented development, sustainable development and revitalization of green transport. The existing analytical research on pedestrian network is using a pedestrian's moving distance to a destination and integration in space syntax theory as its representative accessibility factors. However, the uniplanar network moving distance fails to reflect topographic characteristics, so the moving distance could show a similar result value in case of the regions for analysis that have a similar network structure to each other. Accordingly, the aim of this study is to suggest a new analytical methodology on pedestrian network accessibility in consideration of the grade in pedestrian sections and a pedestrian's size. this study, in its analysis of a uniplanar pedestrian network moving distance, analyzed the pedestrian network moving distance in consideration of the grade in pedestrian sections, and even the pedestrian network moving distance in consideration of a pedestrian's size, and suggested the methodology on pedestrian network accessibility analysis in consideration of a more substantive pedestrian's characteristics. It is hoped that the methodology used by this study will be used as the methodology on pedestrian network analysis which can reflect topographic characteristics in the pedestrian network analysis, and take a more substantive pedestrian's movement into account.

• Journal of Korean Society of Transportation
• /
• v.22 no.5
• /
• pp.111-122
• /
• 2004

The driver's decision making (e.g. route choice) is a typical decision making with an uncertainty. In this paper, we investigate the effect of route guidance information on driver's route choice and learning behavior and analyse the potential of information system in a road network in which traffic flows follow random walk. A Simulation performed focuses on the relationship among the network wide performance, message receiving rates and driver's learning mechanism. We know that at high levels of message receiving rates, the network-wide performance may get worse. However, at low levels of receiving rates, we found that the travel time when guidance information is provided decrease compared to the cases when no pubic information is provided. Also, we found that the learning parameter of the learning mechanism model always changes under nonstationary traffic condition. In addition, learning process of drivers does not converge on any specific value. More investigation is needed to enlarge the scope of the study and to explore more deeply driver's behavior.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.3
• /
• pp.33-40
• /
• 2011

This paper presents the prediction and evaluation of landslide using LRA(logistic regression analysis) and ANN (Artificial Neural Network) methods. In order to assess the landslide, we selected Sarabong, Byeoldobong area and Mt. Song-ak in Jeju Island. Five factors which affect the landslide were selected as: slope angle, elevation, porosity, dry density, permeability. So as to predict and evaluate the landslide, firstly the weight value of each factor was analyzed by LRA(logistic regression analysis) and ANN(Artificial Neural Network) methods. Then we got two prediction maps using AcrView software through GIS(Geographic Information System) method. The comparative analysis reveals that the slope angle and porosity play important roles in landslide. Prediction map generated by LRA method is more accurate than ANN method in Jeju. From the prediction map, we found that the most dangerous area is distributed around the road and path.