• Journal of the Korean GEO-environmental Society
• /
• v.16 no.3
• /
• pp.41-48
• /
• 2015

Several sensor systems are used to estimate and predict the slope behaviors, however though slope sensing systems are much up-to-dated compared to before, they are mainly focused on the hardware developing. It means the analyzing software is deficient to apply the examining slope behavior for slope stability. In real case, slope behavior shows the 3-dimensional movement and failure; however the modeling methods for 3-D behavior are more difficult and need more variables. 1-D analysis shows only the length variation, however the real slope makes the 3-D behaviors. To fix the 3-D space coordinate, three values should be determined such as length, horizontal angle and vertical angle. Therefore if the 3-D coordinate system were composed by the points considered of two directions and length, the 3-D space could be separated into horizontal plane and vertical plane. The data from DY-slope in Chungbuk province was analyzed to the developed 3-D coordinate system. It is concluded from the results of 3-D analysis, the slope is generally moving to transverse direction, also the displacements are happening to road and vertical direction at the same time. Presently, the accumulated displacement between sensing points shows small value within 4.3 cm, and the displacements of all sensing points show the similar directions and magnitudes.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.1
• /
• pp.117-130
• /
• 2017

Bicycles are leading to serious accidents in the event of a side collision, and it is very important to prevent accidents in advance because it is difficult to actively deal with them in a dangerous situation. As a part of the bicycle safety driving support technology, this study establishes bicycle accidents dangerous zone based on bicycle accident data and road property information of digital map nationwide and provides timely safety information to cyclists. The point selected by using actual accident data was called 'dangerous zone', and the potential accident occurrence point generated by modeling based on this 'dangerous zone' was called 'logical dangerous zone'. As a result of the research on the Designation of Logical Bicycle Accident Dangerous Zone, the regional specificity of the bicycle accident points across the nation was generalized to the form of the logical dangerous zone through the network data.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.137-147
• /
• 2014

PURPOSES : Daejeon is basically divided into an old downtown and a new downtown, and the recent relocation of the Chungcheongnam-do Provincial Government of Republic of Korea from the old downtown and the opening of governmental buildings in the new downtown as well have made this new downtown only densely populated with industrial and business facilities. Such changes in the downtowns have promoted the conditions of the new downtown while, consequently, dragging down the old downtown. Out of concern for those unbalanced developments of the two downtowns, Daejeon is now carrying out several city projects to revive the old downtown. In the light of that, as a part of the project to promote the old downtown, this study aims to conduct an evaluation on landscape of the culture and arts street in Daeheungdong which was built upon those ideas of a theme street project by Daejeon. METHODS : Based on the findings from the questionnaire not only on the components that would design the streetscape of the culture and arts street but also on the public satisfaction with the streetscape, the study defined how those changes in the components affect emotional factors of the pedestrians. In order to achieve the research goal, the study made changes in D/H ratio of the street structural components as well as the roadside trees. In terms of the questionnaire method, the study used the SD scale, and proceeded with its investigation through the frequency analysis, the principal component analysis (the factor analysis) and the structural equation model. RESULTS : According to the results from the factor analysis and the regression analysis, of those three factors, such as the openness, the comfortable sensation and the safety, the openness followed by the comfortable sensation and the safety was determined to have the most positive influence on the total satisfaction. The structural model analysis reported that the D/H and the structural components of the roadside trees and planting have a positive effect on the emotional image, and this emotional image also appeared to be positively related to the total satisfaction. CONCLUSIONS : This study looked into how the changes in the street structural components of the culture and arts street in Daeheungdong would affect the satisfaction with the streetscape, and finally confirmed that the D/H and the planting are what would have a positive effect on this satisfaction. What has been learned from this study will be the basic data to figure out how to promote and improve the culture and arts street in Daeheung-dong as this data will also help designing and developing of those specialized streets in other regions.

• Journal of Korean Society of Transportation
• /
• v.25 no.2 s.95
• /
• pp.63-72
• /
• 2007

The purpose of this study is to develop a traffic characteristic analysis, a correlation analysis with the variables of traffic characteristics, and accident estimation models while recognizing the seriousness of the traffic accidents. The analyses deal with the 181 4-legged signalized intersections that accounted for 1,183 out of 3,115 accidents in Cheongju in 2004. After measuring ADT, intersection area, average lane width, elevation, and other items as independent variables and the number of traffic accidents, the traffic accident rate (accidents per million entering vehicles) and equivalent property damage only (EPDO) figures as dependent variables which are estimated as influencing signalized intersection accidents, the estimation models are developed using correlation analysis and multiple regression analysis. In the analysis of the number of traffic accidents, the model indicates an $R^2$ of 0.612, and five independent variables are taken as significant factors. In the analysis of traffic accident rates, the model indicates an $R^2$ of 0.304 and five significant factors, including intersection area and ADT. Also, for the analysis or the EPDO numbers, which coincides with understanding the seriousness of the traffic accidents and the traffic characteristic analysis, the model indicates an $R^2$ of 0.559, and four independent variables (ADT, main street average lane width, elevation, and speed limit) as significant factors.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.151-159
• /
• 2008

Performances of retroreflectivity vary place to place, according to traffic volumes and time lengths after striping, depending on pavement marking materials and colors. The present paper uses the nation wide data of retroreflectivity, which has been collected from freeways and then tries to develop the regression curve setting traffic volume and service life as independent variables and retroreflectivities as dependent variables. The DB system includes two year's measurement in $2005{\sim}2006$ over Korean freeway pavement marking at an interval of three months for the period. The mobile measurement system, a laserlux, was employed for the purpose. The DB has provided a lot of information about materials and performance of the specific pavement marking such as geometric features, traffic volumes, material characteristics and the installation date. This study provides the comparison of pavement marking performances under diversified conditions. Based on accumulated pavement marking performances, this study provides performance curves based on the diversified factors. The goal of the retroreflectivity modeling is to develop equations that can be used to estimate an average retroreflectivity of pavement markings as a function time since application and traffic volume. After representing the variation of retroreflectivities and estimating regression curves by linear, exponential, logarithmic and power function, the regression curve which had the highest coefficient of determination and the value similar to the last field measurement was regarded as the retroreflectivity decay model. As a result of verification, the decay model showed the signification within the 90% confidence level and especially showed the clear relation with field data according to increase of cumulative vehicle exposure. Accordingly, these models can be used to determine service lives, retroreflectivity degradation rates, and retroreflectivity of new markings.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.3
• /
• pp.94-106
• /
• 2008

As populations inhabiting in natural ecosystem are fragmented by artificial barriers and habitats are destructed by development, extinction possibility of species is getting higher. It is necessary to design and to manage conservation areas and corridors considering animals' movement and migration for sustainable species diversity in present circumstances. 'Least-cost modeling' is one commonly employed approach in which dispersal costs are assigned to distinct habitat types and the last-costly dispersal paths among habitat patches are calculated using a geographical information system (GIS). This study aims to design ecological corridor using least-cost path method and to apply it to a regional ecological network considering movability of medium-large size mammals. This study was carried out over the metropolitan area, which has been deforested by rapid urbanization. Nevertheless there is connected with Gangwon province, Baekdudaegan mountain range and DMZ, considered where many forest species can migrate to this region. This study employs such an approach to develop least-cost path models for medium-large size mammals, have inhabited for this entire region. Considering those species, two forest areas as a source of species supply and forest areas more than 1,000ha are selected as focal forest areas. Movement and migration paths from species supply sources to focal forest areas are calculated by applying landscape permeability theory using land cover map, road density map and land slope map. Results showed least-cost paths from species supply sources to focal forest areas on two species. Wildcat and roe deer are different in some least-cost paths caused by their landscape permeability but paths show generally same specifics. The result of considering regional distribution of expected movement and migration paths to regional ecological network, low altitude mountains of western metropolitan area are evaluated important area for species connectivity. In national or regional levels ecological connectivity is essential to promote species diversity and to preserve integrated ecosystem. This study concludes that developing least-cost models from similar empirical data could significantly improve the utility of these tools.

• The KIPS Transactions:PartD
• /
• v.11D no.6
• /
• pp.1259-1268
• /
• 2004

To organize training in limited training area for an actuai combat, realistic training simulation plugged in by various battle conditions is essential. In this paper, we propose a virtual target overlay technique which does not use a virtual image, but Projects a virtual target on ground-based CCD image by appointed scenario for a realistic training simulation. In the proposed method, we create a realistic 3D model (for an instructor) by using high resolution Geographic Tag Image File Format(GeoTIFF) satellite image and Digital Terrain Elevation Data (DTED), and extract the road area from a given CCD image (for both an instructor and a trainee). Satellite images and ground-based sensor images have many differences in observation position, resolution, and scale, thus yielding many difficulties in feature-based matching. Hence, we propose a moving synchronization technique that projects the target on the sensor image according to the marked moving path on 3D satellite image by applying Thin-Plate Spline(TPS) interpolation function, which is an image warping function, on the two given sets of corresponding control point pair. To show the experimental result of the proposed method, we employed two Pentium4 1.8MHz personal computer systems equipped with 512MBs of RAM, and the satellite and sensor images of Daejoen area are also been utilized. The experimental result revealed the effective-ness of proposed algorithm.

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.59-68
• /
• 2009

Torsional behavior of concrete pavement slabs due to temperature and moisture effects is constrained by self weight and friction etc, and causes stress as the result. The stress due to humidity variation in the slab is difficult to calculate while that due to temperature variation can easily be calculated by a commercial structural analysis program. Thus, the slab behavior can be predicted more accurately if the humidity effect is converted to equivalent temperature and is used as an input of structural analysis. In this study, a concrete pavement slab was constructed and strains of the slab due to environmental loadings were measured for long-term period. Thermal strains were subtracted from the measured strains by using thermal expansion coefficient of the concrete measured in a laboratory. Shrinkage strains, the remained strains, was supposed as additional thermal strains to calculate imaginary temperature with equivalent effect of the shrinkage by dividing the shrinkage with the thermal expansion coefficient. An existing shrinkage model was modified by considering the self weight and friction to be used in another model which can convert differential shrinkage between top and bottom of the slab to equivalent temperature difference. Addition research efforts on tensile stress reduction according to steady increase in the compressive strains are warranted for more accurate stress calculation.

• Journal of Korean Society of Transportation
• /
• v.33 no.6
• /
• pp.554-563
• /
• 2015

This study dealt with developing an accident model for rural signalized intersections with random parameter negative binomial method. The limitation of previous count models(especially, Poisson/Negative Binomial model) is not to explain the integrated variations in terms of time and the distinctive characters a specific point/segment has. This drawback of the traditional count models results in the underestimation of the standard error(t-value inflation) of the derived coefficient and finally affects the low-reliability of the whole model. To solve this problem, this study improves the limitation of traditional count models by suggesting the use of random parameter which takes account of heterogeneity of each point/segment. Through the analyses, it was found that the increase of traffic flow and pedestrian facilities on minor streets had positive effects on the increase of traffic accidents. Left turning lanes and median on major streets reduced the number of accidents. The analysis results show that the random parameter modeling is an effective method for investigating the influence on traffic accident from road geometries. However, this study could not analyze the effects of sequential changes of driving conditions including geometries and safety facilities.

• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.135-147
• /
• 2008

One of the efforts both to prevent urban sprawling development patterns and to promote use of public transportation is known as Transit-Oriented Development (TOD), including such planning elements as the density and diversity of land use and pedestrian-friendly urban design around a transit center. The aim of this study is thus to conduct impact analyses of TOD planning elements on transit ridership in the Seoul rail station areas. First, the authors investigate and draw out various actual elements of TOD planning by using GIS-based data and Smart Card data. Then the authors analyze impacts of TOD planning elements on transit ridership for the Seoul rail station areas. After condensing 34 variables presumably influencing transit ridership into seven factors by using factor analyses, the study utilizes multiple regression modeling methods to identify their impacts on transit ridership. The analysis results demonstrate that transit ridership tends to increase more in rail station areas where there is a non-residential high density, mixed use of land and narrow and small-size road network patterns. The implementation of TODs should be a useful method in inducing a Transit-Oriented City through redevelopment and new development.