• Journal of Forest and Environmental Science
• /
• v.24 no.2
• /
• pp.99-109
• /
• 2008

This study conducted 6 times of roadkill investigations in national road 121 km (about 10%) of Chungcheongnam-do. As a result of the investigation, 94 individuals were found dead on the road. The roadkill statuses by construction of road were 44 times (1.13 times/km) at two traffic lanes, 1 time (1.90 times/km) at three lanes, and 23 times (0.35 times/km) at four traffic lanes. Also, land use on the frequency of roadkill were 26 times between mountain region and cultivated land, 25 times between cultivated land and cultivated land, and 20 times between mountain region and mountain region. So, particular attention is needed at the construction and facilities of road to reduce roadkill.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.4
• /
• pp.164-171
• /
• 2013

In urban planning, road facility is used not only for the transportation purpose but also for the utility line space purpose such as electrical, gas, tele communication, heating, water, sewer, and so on. However, since these utilities are built by many different groups, it becomes very difficult to communicate each other. Delay in one party can cause another party's schedule delay but they don't commuicate often. Also, some delay in utility work can cause frequent pavement cut. And, this will impact on construction cost, schedule delay, low quality, user complain and cost. This study developed spatiotemporal decision model to prevent prequent utility cut for mega project such as new urban development project. In addition, this study developed utility cut management system to manage utility cut schedule under pavement. Finally, developed system was applied to new urban development project and verified there effectiveness.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.2 s.32
• /
• pp.21-28
• /
• 2005

Local government has constructed GIS DB for efficient business achievement and effective management of complex city facilities and has been developing and utilizing application systems, such as Underground Facility Management System Road Management System and so on. However, Facility Management System is providing functions for business, but not for GIS DB's maintenance. City facilities GIS DB managed by GIS technical expert collects basic figure and attribute information through survey and field investigation and is constructed via complex process, such as structurize editing etc. So it has been concerned that the update and confidence of CIS DB can be lower if a business man who does not have enough experiences about Facility Management System operates it by himself. Therefore, functions that enable business users to operate Facility Management System easily should be provided.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1238-1243
• /
• 2009

As Social Overhead Capital(SOC) has been expanded, the highway road construction has been accelerated and city road system has been more complicated. So, long road tunnels have been increased and traffic flow rate also has been raised. Accordingly, the exhausting gas of vehicle cars seriously deteriorates the tunnel inside air quality and driving view. In order to improve tunnel inside air quality, it is needed to introduce a compulsory ventilation system as well as natural ventilation mechanism. The former, that is, a special compulsory ventilation facility is very useful and helpful to prevent a tunnel of being contaminated by traffic in most case. In the case of obtaining clearer and longer driving view, the ventilation systems have to be considered in order to remove floating contaminants or exhaust gas from engines. In this paper, discharge electrode design technology will be discussed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.1
• /
• pp.71-79
• /
• 2003

This study intended to extract the spatial data and attribute data from the images of terrestrial and aerial photographs and to compile the digital map from the images using various kinds of photograrmmetric analysis. Also this study aimed to develope the technique of constructing the Information System for Building and Road Facility (ISBRF) using the compiled digital maps and the extracted data. The spatial or attribute data for the facilities in the area was extracted using the single terrestial photographs and graphical method. And the Three Dimensional Frame Model was produced from multiple images of terrestial photographs. In addition, the spatial data base for the objective area was updated by the vectorizing procedures with small scale areal photos. It is concluded that the efficient techniques for constructing the ISBRF was suggested in this study.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.167-175
• /
• 2011

Evaluation of fuel consumption for the various road condition and vehicle type is necessary to perform the economic analysis of road construction which is important for the efficient design and management of road. Economic analysis of road should consider the social cost which can be divided into agency cost including initial construction expense, maintenance cost, and so on, and user cost consisting of vehicle operating cost, congestion cost, etc. Since vehicle operating cost depends on the traffic volume, fuel consumption that is a major part of vehicle operating cost will change by traffic volume as well. Fuel consumption is significantly affected by vehicle speed and road condition, especially the roughness. Thus, fuel consumption should be evaluated in terms of road condition, which is not currently considered. In this study, the estimation model of fuel consumption for the passenger cars in Korea has been developed by considering the road condition. First, the relationship between vehicle speed and fuel consumption that is used to calculate the vehicle operating cost for investment evaluation of transportation facility and the initial feasibility study of road construction was investigated. Second, with the consideration of road roughness, fuel consumption of the passenger car was measured. From the measurement, it was found that fuel consumption increased by $80m{\ell}$ per 100km driving as the roughness increased by 1m/km. Therefore, it is recommended that for the economic analysis of road design and management, the fuel consumption should be a function of road roughness.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.3
• /
• pp.19-25
• /
• 2013

Recently, more accurate database information of facilities is being required, with the increase in importance of urban road facility management. Therefore, this study proposed how to automatically detect particular traffic signs necessary for efficient construction of road facility DB. For this study, central locations of facilities were searched, after recognition and automatic detection of particular traffic signs through an image. Then, coordinate values of traffic signs calculated in the study were compared with real coordinate values, in order to evaluate the accuracy of traffic sign locations which were finally detected. Computer vision technology was used in recognizing and detecting traffic signs through OPEN CV-based coding, and photogrammetry was used in calculating accurate locations of detected traffic signs. For the experiment, circular road signal(No Parking) and triangular road signal(Crosswalk) were chosen out of various kinds of road signals. The research result showed that the circular road signal had a nearly 50cm error value, and the triangular road signal had a nearly 60cm error value, when comparing the calculated coordinates with the real coordinates. Though this result is not satisfactory, it is considered that there would be no problem to find locations of traffic signs.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.4
• /
• pp.37-53
• /
• 2024

This study selected bicycle road hazard detection factors for mobile IoT sensor device operation and developed service application plans. Twelve bicycle road hazard detection factors were derived through a focused group interview, and a fuzzy AHP-based importance analysis was conducted on 30 road and transportation experts. As a result, 'damage to pavement' (1st overall) and 'environmental obstacle' (2nd) with low visibility but a high risk of accidents were selected the most. The factors in terms of facility management, such as 'disconnected route occurrence' (4th), 'artificial obstacle' (5th), 'effective width' (6th), and 'poor drainage' (7th), were selected as the upper and middle areas. Factors that are not direct accident-inducing factors, such as 'loss of road markings' (11th) and 'free space width' (12th), were selected the least. Based on this, a plan was presented to apply the bicycle road hazard detection service and a service operation strategy according to real-time performance. Nevertheless, follow-up studies, such as human behavioral analysis based on bicycle operators, analysis according to the bicycle road type, service demonstration, and pilot operation, will be needed to develop safe bicycle road management is expected.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.467-471
• /
• 2009

A road is a fundammental public traffic facility for transporting people and goods. Road designer should determine the best route considering various conditions to minimize environmental bad effect due to road construction and show road functions sufficiently. In this research, we tried to select the optimal route location by comparing candidate routes considering weights of various items such as land use, slope, aspect, land price and so forth. The candidate routes were analyzed and visualized from built data using a GIS software and then compared with the existing route.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.4
• /
• pp.347-357
• /
• 2002

It is required that information sharing and integrated management between roads and underground facilities because there are so many possibilities to happen unexpected accidents. But if there are road excavation work happened, work agency should ask fer other facility information to the facility management company. In the case of local government, it is increasing that the needs for the development of roads and underground facilities management system and information sharing because digital map generation(1/1,000 scale) completed. In this study, as a way of integrated management and information sharing between roads and underground facilities, centralized system based on internet web technique and decentralized system based on closed network technique between the local government are considered. And for the development of information sharing system, action plan and considering points are proposed.