• Title/Summary/Keyword: Road facility

Search Result 389, Processing Time 0.024 seconds

Accuracy Analysis of Image Orientation Technique and Direct Georeferencing Technique

  • Bae Sang-Keun;Kim Byung-Guk
    • Spatial Information Research
    • /
    • v.13 no.4 s.35
    • /
    • pp.373-380
    • /
    • 2005
  • Mobile Mapping Systems are effective systems to acquire the position and image data using vehicle equipped with the GPS (Global Positioning System), IMU (Inertial Measurement Unit), and CCD camera. They are used in various fields of road facility management, map update, and etc. In the general photogrammetry such as aerial photogrammetry, GCP (Ground Control Point)s are needed to compute the image exterior orientation elements (the position and attitude of camera). These points are measured by field survey at the time of data acquisition. But it costs much time and money. Moreover, it is not possible to make sufficient GCP as much as we want. However Mobile Mapping Systems are more efficient both in time and money because they can obtain the position and attitude of camera at the time of photographing. That is, Image Orientation Technique must use GCP to compute the image exterior orientation elements, but on the other hand Direct Georeferencing can directly compute the image exterior orientation elements by GPS/INS. In this paper, we analyze about the positional accuracy comparison of ground point using the Image Orientation Technique and Direct Georeferencing Technique.

  • PDF

Production of A Plane Figure of Campus with RTK GPS and TS (RTK GPS측량과 토탈스테이션에 의한 교내 평면도 제작)

  • Lee, In-Su;Lee, Kee-Boo;Park, Woon-Yong
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.10 no.4 s.22
    • /
    • pp.69-76
    • /
    • 2002
  • Nowadays information is very important for Civil Engineering. This information is acquiredmostly via Surveying & Geo-spatial Information System. Also this information is close to the ITS(Intelligent Transformation System), Navigation, Facility Management, and Digital Mapping, etc and applicable to versatile fields from now on. And in surveying fields, GPS satellites are introduced newly and play a great rules. In this study, RTK(Real-Time Kinematic GPS), one of the positioning technology with GPS satellites, is used for the production of Plane Figure of Campus. The results shows that it is possible to extract the information for some part of a flowerbed and road, but not so for the buildings surrounded. Therefore this give occasion to the a lowering of work effectiveness over the total work-flow. So at such a time, it will be expected that the supplementary systems such TS(Total Station), Plane-table, and theodolite, etc have to be used.

  • PDF

Development of Bicycle Level of Service Model from the User's Perspective Using Ordered Probit Model (순서형 프로빗 모형을 이용한 이용자 중심의 자전거 서비스 수준 모형 개발)

  • Lee, Gyeo-Ra;Rho, Jong-Ki;Kang, Kyung-Woo
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.8 no.2
    • /
    • pp.108-117
    • /
    • 2009
  • The South Korean government is looking for a solution to the ever-growing problems of traffic congestion, and surging international oil prices: the use of the humble bicycle to get to places. However, Many people feel inconvenient using bicycle because of the insufficient bicycle infrastructure and lack of the safety and connectivity between existing pathways. In this study, bicycle level of service model using ordered probit model is developed considering safety, convenience, connectivity, and factors that affect bicycle LOS. The ordered probit model would be recommended for the research which relates in choice, preference and strength etc. Bicycle level of service criteria is calculated by applying this model reflecting bicyclist's point of view. The model which develops from this research which accomplishes a bicycle level of service evaluation and represent alternative solution to encourage bicyclist. It is believed that the proposed model would be greatly utilized in bicycle network planning, bicycle road and facility alternatives testing, projects funding priority.

  • PDF

Strategic Prospects of Environmental Restoration of Stream Side in Japan(III) - With a Special Reference to the Forest Road, Forest Conservation and Erosion Control - (일본(日本)에서 계류변(溪流邊)의 환경복원(環境復元) 발전전략(發展戰略)(III) - 임도(林道) 및 치산(治山)·사방(砂防)을 중심(中心)으로 -)

  • Park, Jae-Hyeon;Woo, Bo-Myeong;Lee, Heon-Ho
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.3 no.3
    • /
    • pp.113-125
    • /
    • 2000
  • This study was carried out to introduce current status and development strategy for an environmental restoration of stream side in Japan, and to consider a methodology which could be effectively applied for the environmental restoration of stream side in Korea. The strategy prospects of environmental restoration in Japan were summarized as follows : 1. When we establish the long term erosion control planning, we should make detail planning after considering of a certain block of watershed units. Because most of the disaster is caused by soil movement which was occurred by water contents. 2. Nowadays, the general torrent erosion control planning system in Japan focused on reducing the sediment such as by placement of erosion control facility and by restoration of afforestation, after calculation of several factors including expected amount of sediment, and the different amount of planned sediment and allowable sediment. 3. In the past, the goal of forest conservation and erosion control planing was to fix the amount of soil movement by construction of permanent facilities. While, the goal of forest conservation and erosion control planning in the future needs to change the techniques to a small and middle scale's soil movement which could prevent soil movement from large scale of soil disasters, but allow soil movement effectively. Also, it is considered to change erosion control dams from non passing type to passing type. 4. Restoration of stream-side ecology, erosion control for the conservation of ecology should be planned and conducted cautiously based on concepts of ecology conservation and development of environmentally sound techniques.

  • PDF

Design and Load Map of the Next Generation Convergence Security Framework for Advanced Persistent Threat Attacks

  • Lee, Moongoo
    • IEIE Transactions on Smart Processing and Computing
    • /
    • v.3 no.2
    • /
    • pp.65-73
    • /
    • 2014
  • An overall responding security-centered framework is necessary required for infringement accidents, failures, and cyber threats. On the other hand, the correspondence structures of existing administrative, technical, physical security have weakness in a system responding to complex attacks because each step is performed independently. This study will recognize all internal and external users as a potentially threatening element. To perform connectivity analysis regarding an action, an intelligent convergence security framework and road map is suggested. A suggested convergence security framework was constructed to be independent of an automatic framework, such as the conventional single solution for the priority defense system of APT of the latest attack type, which makes continuous reputational attacks to achieve its goals. This study suggested the next generation convergence security framework to have preemptive responses, possibly against an APT attack, consisting of the following five hierarchical layers: domain security, domain connection, action visibility, action control, and convergence correspondence. In the domain, the connection layer suggests a security instruction and direction in the domains of administrative, physical and technical security. The domain security layer has consistency of status information among the security domain. A visibility layer of an intelligent attack action consists of data gathering, comparison and decision cycle. The action control layer is a layer that controls the visibility action. Finally, the convergence corresponding layer suggests a corresponding system of before and after an APT attack. The administrative security domain had a security design based on organization, rule, process, and paper information. The physical security domain is designed to separate into a control layer and facility according to the threats of the control impossible and control possible. Each domain action executes visible and control steps, and is designed to have flexibility regarding security environmental changes. In this study, the framework to address an APT attack and load map will be used as an infrastructure corresponding to the next generation security.

A Case Study on the Construction of Large Cross Section Tunnel for Underground Ventilation System (지하환기소 대단면 터널 시공 사례 연구)

  • Noh, Seung Hwan;Choi, Sung Wook;Noh, Sang Lim
    • Tunnel and Underground Space
    • /
    • v.27 no.4
    • /
    • pp.195-204
    • /
    • 2017
  • This case study introduces the construction of large cross section tunnel for underground ventilation system in Sillim-Bongcheon Tunnel Project. In order to grant the safety and efficiency in connecting the ventilation shaft (7.8 m of width, and 6.6 m of height) to a tunnel for axial fan facility (20.8 m of width, and 12.3 m of height), gradual enlargement of tunnel cross section was employed between those and temporary support method was determined based on Q system. In addition, some original designs were revised during construction stage to improve the efficiency of excavation in large cross section tunnel. The advance length was optimized and top heading of the tunnel was excavated without partition in accordance with ground condition and numerical stability analysis results. It is believed that some experiences and considerations in this case study will be useful for the future design and construction in similar large cross section tunnel such as large underground ventilation system or road tunnel with four lanes.

Analysis of Land Conversion Characteristics in Process of Farmland Loss and Urbanization by Distance from Center of City Using Detailed Digital Land Use - With Representative Big Cities and Their Fringe Areas in Japan - (정밀수치정보를 이용한 도시중심에서 거리별 농지손실 및 도시화과정의 토지전용 특성 분석 - 일본의 대표적 도시주변지역을 중심으로 -)

  • Kim, Dae-Sik
    • Journal of Korean Society of Rural Planning
    • /
    • v.9 no.1 s.18
    • /
    • pp.65-75
    • /
    • 2003
  • As a pre-step research to make land-use planning in the region level, this study aims to analyze some probability pattern representing transition probabilities from farmland to others using the sequential detailed digital land-use maps. Kinki and Chubu regions of Japan, which have Osaka and Nagoya cities as their center places respectively, were selected as test regions in this study. The 10m grid land-use maps for four time series at every 5 year from 1977 to 1992 were used. In this study, the regions were divided into three sub-areas 10km, 20km, and 30km according to distance from center cities, respectively. The correlation coefficient (CC) between sub-areas with same distance in the two regions was calculated to analyze whether or not the two regions have common points in the pattern of land-use conversion probability from farmland to other types. The probability distribution of the converted areas which were moved to the urbanized area (residential, commercial, industrial, road, park and public facility areas) was about $40{\sim}70%$ for both all periods and sub-areas. According to distance from city centers, the probability moved to the urbanized area was about 60% at 10km area, and 40% at the 30km area, which means that the values we decreased gradually, while in the case moved to the forest and the etc areas, the values were increased slightly. The CC analysis from the paddy field and the dry field to the others separately showed that there is high correlation in the probability pattern between the two regions.

Analysis on Spatial Pattern of Child Care Environment in Rural Area using Accessibility (접근성을 이용한 농촌지역 유아보육환경의 공간적 특성 분석)

  • Jeon, Jeongbae;Park, Meejeong;Choi, Jinah;Lim, Changsu;Kim, Eunja
    • Journal of Korean Society of Rural Planning
    • /
    • v.24 no.1
    • /
    • pp.1-10
    • /
    • 2018
  • This study is to evaluate the per capita accessibility to child care facilities using road map in rural village unit considering the supply and demand of child care facilities in municipal (Si-Gun) units. Using these estimated accessibility, the most accessible regions to child care facilities was identifies using Moran's index. Assuming establish a new child care facility in the most accessible region, the sensitivity of child care environment was analyzed. The number of regions are 71 si-gun-gu where supply of child care facilities is insufficient. The average accessibility per capita is 1.09 km to child care facilities and the average accessibility in Myeon unit is approximately 2.2 times higher than accessibility in Eup unit (Eup unit 0.54 km, Myeon unit 1.21 km). Approach tendency from village to child care facilities has positive relationship as 0.451 global Moran's index. The high-high (H-H) accessibility regions are wide as Gangwon-do, Gyeongsangbuk-do, Gyeongsangnam-do, Jeollanam-do and Chungcheongbuk-do. Assumed to be established the new child care facilities in Yangyang-gun (Ganwon-do), accessibility changes of child care environment are up to 2.7 times greater and the recipient population is 77% of Yangyang-gun.

A Study on the Process of Constructing a Long-Term Railway Network Plan (장기철도망 구축계획의 구축과정에 관한 연구)

  • Seo, Kwang Seok
    • Journal of the Society of Disaster Information
    • /
    • v.8 no.3
    • /
    • pp.267-275
    • /
    • 2012
  • Long-term national railway building comprehensive review of the proposal had 100 in railway history, railway rail network plan. Planning routes for establishing a plan, but, considering the rail network, the plan was that could with the very important meaning in the What more economical route considering the costs and benefits of building a rail network under budget constraints, went through the process of background lines of business unit interval expenses to adopt a business unit interval. Especially in building the railway network, as well as the road plan was to reflect in order to build for the future railway facilities was secured examine the possibility of possible budget commitment. Budget of securing the transportation tax, gasoline tax, and other transportation facilities in order to secure and commit the current funding approach and Review Bodu possible budget scenarios based on it written. Was also enforce rail system built in reviewing the demand more than anything that can take advantage of the railway distance by railway and the merits of the competition means to compete in the form of the assumed situation. The rail network deployment plan, considering this was discussed, based on the results of the plan to establish the first annual or period of the plan change was based on the budget that was unknown.

Design and Implementation of Application Service Component for Reuse in Local Government's GIS (지방자치단체 지리정보시스템에서 재사용을 위한 응용 서비스 컴포넌트의 설계 및 구현)

  • Kim, Kwang-Soo;Cho, Dae-Soo;Kim, Do-Hyun;Choi, Hae-Ock
    • Journal of Korea Spatial Information System Society
    • /
    • v.3 no.1 s.5
    • /
    • pp.75-87
    • /
    • 2001
  • The advantages of using components result from their reusability between applications. Applications can be easily implemented by adding components. In this paper, we described the design and implementation process of ASC(Application Service Component) for component-based GIS applications. In our project, there are 5 applications : Road Facility Management, Urban Planning, Cadastral Map Management, Water Supply Management, and Sewerage Management. All of them use MapBase component which supports common GIS functionality. Although they are different applications, some parts of them are same. We analyzed the developed results in 1st and 2nd year, and the achievement of UIS(Urban Information System) project in Busan Metro City in Korea. The UIS of Busan was consisted of 5 applications to equal with our project. Then, we extracted 11 common used components between 5 applications, and implemented 5 common components of them and 2 additional components. They were Authority, GISReport, IndexMap, Measurement, Search, Symbol Manager, and Attribute Display. As we offered them to companies developing application components, they were able to reduce the development time.

  • PDF