• Journal of Biosystems Engineering
• /
• v.24 no.5
• /
• pp.399-406
• /
• 1999

This study was conducted to investigate the labor requirements and transportation cost of paddy for the different harvest and transportation systems for obtaining a basic reference to the improvement of present harvest-transportation systems. One hundred and eighty five farm households with sack type combine harvester and thirty farm households with bulk type combine harvester were surveyed for thirty counties from eight provinces except jeju and also eleven Rice Processing Complex were covered for this survey. This survey was carried from 8th. October 1997 to 5th. November 1997. For the labor requirements, bulk trailer system require 6.8th/ha, 10.3/ha for sack harvest-tractor trailer, and 8.8h/ha for bulk harvest-container bag. The machinery utilization cost for the different paddy harvest-transportation systems, combine sack harvest-tractor trailer system is 282 thousand won/ha, and most economical compared with other systems. Combine bulk harvest with tractor system was 416 thousands won/ha and combine bulk harvest with container bag system was 446 thousands won/ha. In order to propagate bulk harvest-transportation system, a proper bulk transportation means with considering road condition in the paddy field and paddy size should be developed, and considering cycle time it appeared that the proper capacity of bulk container was 3.5ton at the present.

• Journal of Korean Society of Transportation
• /
• v.20 no.2
• /
• pp.27-38
• /
• 2002

This study estimates the social cost of the traffic congestion of the Express highway from Seoul to Pusan during the New Year holiday in 1999. Considering inelastic demand and the hyper congestion, we show the congestion cost can be estimated as externalities caused by traffics which exceed the road capacity. Due to the congestion, it is estimated that it took about 12.40 hours more from Seoul to Pusan. The congestion is also estimated to have caused fuel cost of 0.6 billion won. time cost of 43.6 billion won and environmental cost of 0.5 billion won. The total cost reached up to 44.8 billion won.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.550-555
• /
• 2005

In vicinity of Seoul, there has been water service tunnel that classified into 1st grade facility by special act for the safety control of public structures and with providing capacity equals to $1,543{\times}10^3$(ton/day) and inner pressure equals to $2.5-3.5kg/cm^2$. In this research, site investigation and stability analysis for water tunnel caused by new construction of road tunnel were carried out. the ground near water tunnel were zoned into spatial area having similar geotechnical characteristics and estimating geotechnical properties for each area. The site for analysis consists of banded biotite gneiss, biotite schist and granite gneiss with spatial non-homogeneity, and for that reason weathering and fault zone were distributed with large scale. It's important thing to consider spatial ground zone and their geotechnical properties properly into stability analysis at design and construction stage. Also, using results of site investigation, stability of existing tunnel have been analyzed for Hydraulic Fracture/Jacking and deformation in detail.

• Journal of Korean Society of Rural Planning
• /
• v.22 no.4
• /
• pp.13-24
• /
• 2016

Tourism is often considered as one of the main industries to promote development and modernization in small South Pacific islands countries. In Fiji, this was recognized in the 1960s, and resulted in large-scale resort based tourism development in coastal areas. While tourism has obvious advantages to the economy, a lot of problems such as exclusive foreign control of the main hotels and resorts, considerable overseas leakage of earnings, the limited participation by indigenous resource owners, and localized environmental damages to reefs and mangroves are emerging. For sustainable tourism development, it is needed to set growth objectives and targets for tourism in terms of benefits to Fiji, and to concentrate support on 'Rural Tourism' such as community-based tourism that have lower leakage and put more into local economies. Through case study in this paper, to develop rural tourism at the local level, several recommendations are as follows: 1) to introduce various rural tourism programs such as experiencing Fiji's traditional culture, participating in activities, picking fruits and harvesting agro-products, 2) to enhance aggressive promotion and marketing strategies, 3) to build the capacity of local communities for improving the quality of tourism services, and 4) to provide the infrastructure for tourism business such as road accessing, water supply and disaster prevention.

• Proceedings of the KOR-KST Conference
• /
• 1995.05b
• /
• pp.69-76
• /
• 1995

Difficulties in riding , driving and parking are a common issue which inevitably appears in city urbanization and city modernization development all over the world. However, those cities differ in controlling the traffic. According to the specific practice in Shanghai, this article presents the various factors which affect the traffic capacity and operation quality . This article also outlines transportation system management technique of overall coordination and comprehensive control in the following seven aspects : controlling traffic motivation : improving traffic distribution : reasonably and scientifically selecting travel mode, travel route and travel time : reinforcing traffic management and road construction. The article finally suggests that the above mentioned points are cost-effective ways of the handling traffic plight for metropolitan transport.

• Structural Engineering and Mechanics
• /
• v.50 no.4
• /
• pp.419-439
• /
• 2014

In this study, the structural performance of a seven span masonry arch bridge was evaluated. Investigations were performed on Aspendos (Belkis) Masonry Arch Bridge which was located on road of Aspendos Acropolis City in Antalya, Turkey. The old bridge was constructed in the early of fourth century AD, but it was exposed to the earthquakes in this region and the overloading by the river water. The old bridge was severely damaged and collapsed by probably an earthquake many years ago and a new bridge was then reconstructed on the remains of this old bridge by Seljuk in the 13th century. The bridge has also been affected from overflowing especially in the spring of each year, so some protective measures should be taken for this monumental bridge. Therefore, the structural performance under these loading has to be known. For this purpose, an initial finite element model was developed for the bridge and it was calibrated according to ambient vibration test results. After that, it was analyzed for different load cases such as dead, live, earthquake and overflow. Three load combinations were taken into account by deriving from these load cases. The displacements and the stresses for these combination cases were attained and compared with each other. The structural performance of Aspendos Masonry Arch Bridge was determined by considering the demand-capacity ratio for the tensile stress of the mortar used in Aspendos Masonry Arch Bridge. After these investigations, some concluding remarks and offers were presented at the end of this study.

• International Journal of Highway Engineering
• /
• v.16 no.3
• /
• pp.75-84
• /
• 2014

PURPOSES : Traffic congestions which occur in the intersections of arterials lead to mobility and environment problem, and then traffic agencies and engineers have been struggling for mitigating congestions with greenhouse gas emissions. As an alternative of solving theses problems, this study is to introduce a low-cost and high-effectiveness countermeasure as unconventional intersections which are successfully in operation in U.S.. The main feature of unconventional intersections is to reroute turning movement on an approach to other approach, which consequently more green time is available for the progression of through traffic. Due to improved progression, this unique geometric design contributes to reduce delays with greenhouse gas emission and provides a viable alternative to interchanges. This study is to evaluate the potential operation and environment benefits of unconventional intersections. METHODS : This study used the VISSIM model with Synchro and EnViVer. Synchro is to optimize signal phases and EnViVer model to estimate the amount of greenhouse gas emissions by each condition. RESULTS : The result shows that unconventional intersections lead to increase the capacity and to reduce greenhouse gas emissions, compared to existing intersections. CONCLUSIONS : Unconventional intersections have the ability to positively impact operations and environments as a low-cost and high-effectiveness countermeasure.

• Proceedings of the KOR-KST Conference
• /
• 1995.05a
• /
• pp.61-68
• /
• 1995

Difficulties in riding, driving and parking are a common issue which inevitably appears in city urbanization and city modernization development all over the world. However, those cities differ in controlling the traffic. According to the specific practice in Shanghai, this article presents the various factors which affect the traffic capacity and the operation quality. This article also outlines transportation system management technique of overall coordination and comprehensive control in the following seven aspects: controlling traffic motivation; improving traffic distribution; reasonably and scientifically selecting travel mode, travel route and travel time; reinforcing traffic management and road construction. The article finally suggests that above mentioned points are cost-effective ways of handling traffic plight for metropolitan transport.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.804-808
• /
• 2007

when electric traction system used DC 1500V runs on decline of rail road track and slows down, Dc voltage goes beyond regular voltage. In this case extra power is forcibly wasted by resister because rectifier of substation and electric train including power converter and so on are out of order. This paper described a DC electric railway system, which can generate the excessive DC power form DC bus line to AC source in substation for traction system. The proposed regeneration inverter system for DC traction can be used as both an inverter and an active power filter(APF). As a regeneration inverter mode, it can recycle regenerative energy caused by decelerating tractions and as an active power filter mode, it can compensate for harmonic distortion produced by the rectifier substation. In addition, electric traction system products harmonic current and voltage distortion and reactive power because power converter is used so regeneration inverter normally runs such as active power filter(APF) for improving power quality. From the viewpoint of both power capacity and switching losses, the system is designed on the basis of three phase PWM inverters and composed of parallel inverters, output transformers, and an LCL filter.

• Journal of Environmental Science International
• /
• v.12 no.1
• /
• pp.23-34
• /
• 2003

Urban air quality is usually worse than that of rural counterpart. The contrasting atmospheric properties seem to be direct result of different urban-rural air pollutant emission. Hence, the emission estimation of air pollutants plays an important role to the atmospheric environmental management. The main purpose of this study is to find out the temporal and spatial distribution of air pollutant emission in Daegu area. For the study, the Daegu statistical yearbook and data of waste facilities and the report on traffic survey issued by Daegu metropolitan city and the statistical yearbook on the road capacity issued by the ministry of construction and transportation are used. Each item for the emission estimation is $SO_2$, CO, HC, $NO_x$, PM-10 from point, line and area source. The result were as follow; (1) The air pollutants with the highest amount of emission from the emission source is CO followed by $NO_x$, $SO_2$, PM-10, HC in descending order of magnitude. (2) The annually totaled air pollutant emission consists of 81%(73,185 ton/year) of line, 11%(9,589% ton/year) of area and 8%(7,445 ton/year) of point source in Daegu. Air polluant emission was mainly due to line sources. (3) High-emission of the air pollutants of line source appeared ariond Bukgu, Dalseonggun, Dongu and Seogu ; the areas with highway networks.