• 제목/요약/키워드: Road Side Slope

검색결과 51건 처리시간 0.022초

산악지림도(山岳地林道)의 노견(路肩) 사면붕괴(斜面崩壞)와 측구침식(側溝浸蝕)에 관(關)한 연구(硏究) (Roadside Landslide and Ditch Erosion in Mountain Forest Road)

  • 마상규
    • 한국산림과학회지
    • /
    • 제76권2호
    • /
    • pp.161-168
    • /
    • 1987
  • 임업기계훈련원(林業機械訓練院)에서 1984년(年) 시범적(示範的)로 임도(林道)를 시설(施設)(10 km)할 목적(目的)으로 10 km를 시공(施工)했는데 1986년(年) 태풍(颱風) 내습시 부분적(部分的)으로 노견붕괴(路肩崩壞)와 측구침식(側溝浸蝕)이 발생(發生)하였다. 이에 대한 원인(原因)을 조사분석(調査分析)한 결과(結果)는 다음과 같다. 측구침식(側溝浸蝕)에 의한 피해(被害)길이는 전림도(全林道) 연장(10km)의 3%에 해당하였으며, 대부분(大部分) 요형사면(凹型斜面)에 사면장(斜面長) 10m 이상(以上)으로 성토(盛土)된 곡선부(曲線部)에서 발생하였고, 부분적(部分的)으로 상수(常水)가 흐르는 계곡부(溪谷部)에 성토(盛土)된 구역(區域)과 상수(常水)가 있는 배수관(排水管)의 유출구(流出口) 양사면(兩斜面)에 성토(盛土)된 부위에서 붕괴(崩壞)가 많이 발생하였다. 측구침식(側溝浸蝕)의 경우 심한 피해(被害)는 계곡수(溪谷水)가 월수(越水)하여 V형(型) 측구(側溝)를 따라 흐르므로서 피해(被害)를 발생시켰으며, 기타 원인(原因)으로는 종단(縱斷)물매가 10% 이상(以上) 급(急)하게 시공(施工)된 지역(地域)에서 나타나 문제점(問題點)으로 인식되고, 직경(直經) 400mm 이하(以下)인 배수관(排水管)이 매설된 집수정(集水井)이 낙엽(落葉) 등(等)의 퇴적(堆積)으로 매몰된 경우와 경사가 급한 침사지(沈砂池)(집수승(集水桝)) 벽이 무너져 내린 결과 이 지점을 월수(越水)하여 측구침식(側溝浸蝕)을 일으키고 있다. 이상(以上)의 결과(結果)에서 시범임도(示範林道)의 태풍피해(颱風被害)는 임도피해예방(林道被害豫防)을 위한 경험부족(經驗不足)에서 나타낸 현상으로 보인다. 상기(上記)와 같은 점을 개선하면 동(同) 시범임도(示範林道) 조성방법(造成方法)은 경제적(經濟的) 임도(林道)차 모델로서 발달될 수 있을 것이다.

  • PDF

산악지역 도로건설에 따른 국지 대기순환의 변화에 관한 연구 (Study on Variation of Local Atmospheric Circulation Due to Road Development in Mountain Area)

  • 황수진;서광수;이순환
    • 한국지구과학회지
    • /
    • 제25권2호
    • /
    • pp.94-108
    • /
    • 2004
  • 얼음골 주변의 지표면 변화에 따른 중규모 대기순환장에 미치는 효과를 보기위하여 수치실험을 실시하였다. 얼음골 남북 경사면에서 발생하는 순환장은 지형과 단파복사에 의한 영향으로 다르게 나타나며, 비대칭을 이룬다. 그리고 이러한 비대칭은 18시까지 계속된다. 야간의 경우, 도로건설에 따른 대기순환장의 차이는 크지 않다. 이것은 주간 단파 복사에 의한 현열플럭스가 감소하며, 현열플럭스외의 다른 요소는 크게 영향을 미치지 않는다는 것을 의미한다. 도로의 건설은 현열플러스의 증가와 관련되고, 주간의 경우, 지형에 의한 곡풍과 결합하여 도로가 없는 경우에 비하여 상승류가 강하여진다. 최대풍속은 4.67 m/s이다. 그리고 이때 도로의 위치역시 주요한 요인으로 작용한다.

UM 자료를 이용한 노면온도예측모델(UM-Road)의 개발 (Development of Road Surface Temperature Prediction Model using the Unified Model output (UM-Road))

  • 박문수;주승진;손영태
    • 대기
    • /
    • 제24권4호
    • /
    • pp.471-479
    • /
    • 2014
  • A road surface temperature prediction model (UM-Road) using input data of the Unified Model (UM) output and road physical properties is developed and verified with the use of the observed data at road weather information system. The UM outputs of air temperature, relative humidity, wind speed, downward shortwave radiation, net longwave radiation, precipitation and the road properties such as slope angles, albedo, thermal conductivity, heat capacity at maximum 7 depth are used. The net radiation is computed by a surface radiation energy balance, the ground heat flux at surface is estimated by a surface energy balance based on the Monin-Obukhov similarity, the ground heat transfer process is applied to predict the road surface temperature. If the observed road surface temperature exists, the simulated road surface temperature is corrected by mean bias during the last 24 hours. The developed UM-Road is verified using the observed data at road side for the period from 21 to 31 March 2013. It is found that the UM-Road simulates the diurnal trend and peak values of road surface temperature very well and the 50% (90%) of temperature difference lies within ${\pm}1.5^{\circ}C$ (${\pm}2.5^{\circ}C$) except for precipitation case.

기계화를 전제로 한 산간경사지답경지정리방안에 관한 연구(II) (A Study on the Methodology of Land-Consolidation Sloping Paddies in land Vallry for the Farm-Mechanization (II))

  • 황은
    • 한국농공학회지
    • /
    • 제24권4호
    • /
    • pp.57-68
    • /
    • 1982
  • The paddy fiels slope located in Kangweon province Hwyongsung gun Gonggeun myon Shinchonri was considerably steep and so it was impossible to economically consolidate the field up to date. But for the porpose of farm mechanization, the field (32. 27ha) was consolidated by the auther under the assitance of the Ministry of Agriculture and Fishery and,;the Administration of Kangweon province. This paddy field consolidation was caused by the treatise on "Land-consolidation methods for farm mechanization in the steep-sloped paddy field", of which the auther is the same. The constrution was carried out from September, 1981 to April, 1982. During the 4esign and construction, some Peculiarities were found and discussed. That is, in design, besides the common condititions for a design, some special conditions were considered and written below; (1) The ranges of field slope in this design were 1/100-1/30. (2) Long sides of the land readjustment blocks must be arranged abreast contour line, and so they make the amount of cutting and banking decreased so as to take the maximum advantage of the configuration of the field. (3) In design, the main principles of dividing blocks were written below; i) First of all, long side of a block should be drawn straight abreast a contour line. ii) Long side of a block should arrange abreast contour line and make its length 100-150m, if not, l)reak the side in order to make a bended rectangle. iii) Length of a short side should be determinded within differences of elevation (0.6 -1. 2m) between the two adjacent blocks toward the normal to a contour line. iv) Length of a short side should be above 15m and the ratio of long and short side should be slso kept 1: (4-6). v) A new field surface leveling was determinded from the elevation which produce the least amount of cuttingand banking within the range of 0.6-1. 2m diffe rences of elevation between the two adjacent blocks. vi) In the course of dividing blocks with the same width along the line which was normal to a contour line, all blocks connot keep their shape in a retangle because of steep slope of the field and so on, and so it was also necessory to make some non-retanglar and small blocks such as a trianglar or trapezoidal shape, which was impossible to use some of farm machinery. But because this non-rectanglar and small blocks were divided, larger and many rectanglar blocks can be divided and construction cost can also be lowered. According to the conditions discussed above, the paddy field consolidation project designed and constructed. And the results of this study were obtained as below; (1) Three-forth of total cost of this paddy field consolidation was not construction cost, and these cost consist of land grading (1/4), road and canal construction cost (1/4) and the other cost (1/4) such as surveying or materials and 56 on. (2) The steeper the land slope, the greater cost was assigned for road and canal construction, and than land grading. (3) Curtailment of the road and canal construction cost depended on simplificating their strutures. (4) In the case of the land slopes were low, the land grading cost was high by 1: 1.4 in comparison with the road and canal construction cost, and conversely when the slops were steep, the road and canal construction cost was high by 1 : 5 in compa- rison with the land grading cost. (5) The densities of irrigation canal, drainage canal and trunk and branch road were 150. Sm/ha, 60. im/ha and 17. 4m/ha respectively. The density of irrigation canal of the area was high by 2 times in comparison with the average one of Kangweon Province, and the others were nearly the same. (6) Most farmers (above 85%) knew the effects of paddy field consolidation. The effects are; 1) Improvement of irrigation 2) Improvement of farm management 3) Improvement of transportarion 4) farm mechanization and 5) grouping of the scattered land. And the more farm modernization was accomplished by these projects, the more farmers wanted to live in their land. (7) In spite of the very steep sloped paddy field, the diminution rate of the net farm land caused by consolidation was 7.7% which was nearly the same as the one of Chulweon plain of Kangweon province. Land grading cost was 971, OOOwon/ha which was rather cheap by 13.2% than the one of Ghulweon plain, and unit construction cost was 5, 341, OOOwon/ha (included soil addition) which was also nearly the same as the one of Chulweon plain and FNFIA (The federation of national farmland improvement association).

  • PDF

사면 안정성 요인에 대한 발파패턴의 영향 (The effect of blasting patterns on cut slope stability factors)

  • 김수로;이학규;장범수;신창건;안상로
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2004년도 춘계학술발표회
    • /
    • pp.614-621
    • /
    • 2004
  • Blasting is a technique for rock excavation: For instance, a rock cutting in a mountain side to prepare a base for a road. The blasting damage affect the rock slope stability. Therefore control blasting must be used. In this study, cutting cases of Sixty-nine rock blasts were investigated. Blasting damage patterns in rock slope and reinforcement methods are studied.

  • PDF

동력경운기의 경사지견인 및 주행특성에 관한 연구 (III)-동력경운의 경사지 견인성능- (Study on the Travel and Tractive Characteristics of the Two-Wheel Tractor on the General Slope Land(III)-Tractive Performance of Power Tiller-)

  • 송현갑;정창주
    • Journal of Biosystems Engineering
    • /
    • 제3권2호
    • /
    • pp.35-61
    • /
    • 1978
  • 동력경운깅가 일반 경사지에서 견인주행하는 경우 견인주행성능과 주행특성을 구명하기 위하여 토양의 종류 및 상태는 일정하게 하고 지면의 기하학적 조건과 견인주행속도 및 견인하중을 변수로 하여 외부동력전달계의 시점인 좌우차륜과 토양간에 발생하는 차륜구동력 및 굴름정항과 Engine에서 구동륜까지 내부전달계를 통하여 전달된 동력의 이론치와 실험치와의 부합여부를 검정하고 부가적으로 동력경운기가 경사지기계화의 동력기로써의 가능성여부와 문제점을 찾으려한다.

  • PDF

동력경운기의 경사지견인 및 주행특성에 관한 연구 (Ⅲ)-동력경운의 경사지 견인성능- (Study on the Travel and Tractive Characteristics of the Two-Wheel Tractor on the General Slope Land(Ⅲ)-Tractive Performance of Power Tiller-)

  • 송현갑;정창주
    • Journal of Biosystems Engineering
    • /
    • 제3권2호
    • /
    • pp.34-34
    • /
    • 1978
  • 동력경운깅가 일반 경사지에서 견인주행하는 경우 견인주행성능과 주행특성을 구명하기 위하여 토양의 종류 및 상태는 일정하게 하고 지면의 기하학적 조건과 견인주행속도 및 견인하중을 변수로 하여 외부동력전달계의 시점인 좌우차륜과 토양간에 발생하는 차륜구동력 및 굴름정항과 Engine에서 구동륜까지 내부전달계를 통하여 전달된 동력의 이론치와 실험치와의 부합여부를 검정하고 부가적으로 동력경운기가 경사지기계화의 동력기로써의 가능성여부와 문제점을 찾으려한다.

절토사면 현황도 작성 및 분석에 따른 설계변경 사례연구 (An Example of Changed Design through the Face Mapping and Slope Analysis)

  • 이병주;채병곤;이경미
    • 지질공학
    • /
    • 제24권1호
    • /
    • pp.137-146
    • /
    • 2014
  • 연구지역의 지질은 흑색천매암, 석회암 및 함역천매암과 중생대 관입안인 흑운모화강암과 석영반암으로 구성되어 있다. 이 중 흑색천매암이 분포하는 구간에서 건설 중인 도로 사면에서 절토사면 현황도(face map)를 4월부터 6월까지 3개월간 작성하였으며 이때 탄질슬레이트 분포지 부근을 포함 사면 내에는 3-4개소에서 사면붕괴와 산 정상부에는 최고 3 m의 변위를 보이며 움직이고 있음이 확인 되었다. 사면 붕괴의 원인은 엽리 및 단층 등의 불연속면의 경사방향이 사면의 경사방향과 일치하는 곳에서 붕괴가 발생하였고 탄질 슬레이트는 빗물을 머금을 때 팽창성을 가짐도 붕괴가 일어나는 원인이다. 반면 본 사면의 도로 맞은편 사면에서는 같은 암상 및 지질구조 조건을 가지고 있으나 엽리 및 불연속면들의 경사 방향이 사면의 경사 방향과 반대방향이므로 안정된 사면을 유지하고 있다. 사면의 붕괴가 일어난 곳에서 안정화를 위해 절개 후 복구(cut and cover) 방법으로 도로의 양쪽 사면 사이 도로 상에 터널 구조물을 설치하여 절개식 터널(cut and cover tunnel)을 시공하였으며 시공 후 사면은 안정화 되었다.

도로 흐름폭 변화에 따른 차집유량 분석 (Analysis of Intercepted Flow according to Change of Flow Width in Gutter)

  • 주동원;김정수
    • 대한토목학회논문집
    • /
    • 제41권4호
    • /
    • pp.377-386
    • /
    • 2021
  • 밀집이 심한 도시는 불투수 면적이 많아 흘러나온 빗물이 빠르게 도로를 타고 한쪽으로 모이게 된다. 이는 도로에 설치된 빗물받이로 차집이 되지 못한 많은 노면 유출수로 인해 측구에서의 흐름 폭이 넓어져 정체 노면수를 증가시켜 교통체증과 미끄러움으로 인한 사고를 유발한다. 이에 본 연구에서는 차집유량 산정식을 제시하기 위해서 간선도로와 고속도로의 최대 종경사를 반영하여 2~10 %의 도로 조건을 반영하였고, 측구 횡경사는 일반도로 횡경사인 2 %를 선정하였다. 도로 차선조건은 중앙차선과 보도를 경계를 2, 3, 4 차선을 선정하였으며, 실험유량은 설계 빈도 상황을 고려하여 실제 도로 조건의 5년, 10년, 20년, 30년의 설계빈도 유수유출량을 실험유량으로 환산한 결과 1.36 l/s~3.96 l/s의 유량을 10개로 나누어 수리실험을 진행하였다. 또한, 측구로 들어오는 유입유속과, 흐름 폭을 고려한 식을 제시하였다. 실험 결과 종경사 증가에 따라 흐름 폭은 증가하고, 차집율은 감소하는 경향을 보였다. 이에 본 연구에서는 IBM SPSS Statistics 24 프로그램으로 회귀분석하여 설계빈도에 따른 우수 유출량, 도로의 종경사를 반영한 흐름 폭과 유입유속의 빗물받이 차집유량 산정식을 도출하였다. 산정된 도출식은 도로에서의 빗물받이 설계에 기초자료로 활용될 것으로 판단된다.

제방겸용도로 건설에 따른 제방 안정성 해석에 관한 연구 (A Study on the Stability of Embankment Due to the Construction of Embankment Combined Use Road)

  • 김성남;이영우
    • 한국도로학회논문집
    • /
    • 제10권3호
    • /
    • pp.109-118
    • /
    • 2008
  • 본 연구에서는 현재 실존하는 제방을 대상으로 제방겸용도로 건설에 따른 안정성의 변화를 살펴보기 위해 건설단계별로 도로건설을 위한 성토 후, 겸용도로 건설 후 도로를 주행하는 차량에 의한 교통하중이 재하될 경우로 구분하여 안정성 변화를 분석하였다. 연구결과 겸용도로 건설을 위한 성토 후와 교통하중(DB-24)을 적용하였을 경우 모두 일반적인 안전율 기준인 1.3을 상회하고 있어 겸용도로 건설에 따른 제방의 안전은 확보되는 것으로 분석되어 제방겸용도로의 건설은 부지 확보 비용 절감을 위해 건설이 가능할 것으로 판단된다. 그러나 겸용도로의 건설로 인해 제방의 안전율 감소 현상이 발생하기 때문에 안정성에 대한 사전 검토가 충분히 이루어져야 할 것이다. 특히 안전율 감소가 가장 큰 경우는 비정상류 상태의 수위상승의 경우로 분석되어 하천제방과 같이 수위변화가 빈번한 경우에는 비정상류 해석으로 설계하는 것이 바람직하며 제내지의 사면경사는 기존제방과 동일한 1:2의 경사를 유지하도록 설계하는 것이 필요할 것으로 판단된다. 또한, 교통하중에 의한 안전율 감소현상도 발생하는 것으로 분석되어 겸용도로 건설 후 주행차량의 하중제한 등 유지 관리에도 지속적인 관심을 기울여야 할 것으로 판단된다.

  • PDF