• International Journal of Automotive Technology
• /
• v.4 no.1
• /
• pp.21-30
• /
• 2003

In this paper a systematic test procedure for evaluation of road-induced noise of a vehicle and guidelines for each test are presented. Also, a practical application of the test procedure to a small SUV is presented. According to the test procedure, all the tests were performed to evaluate road-induced booming noise that is in low frequency range. First of all the information on characteristics of road-induced noise was obtained through baseline test. Coupling effects between body structure and acoustic cavity of a compartment were obtained by means of modal tests for a structure and an acoustic cavity. Local stiffness of joint areas between chassis system and car-body was determined by test for measurement of input point inertance. Noise sensitivities of body joints to operational forces were obtained through test for measurement of noise transfer functions. Operational deflection shapes made us analyze behaviors of chassis system under running condition and then find sources of noise due to resonance of the chassis system. Finally, Principal Component Analysis and Transfer Path Analysis were utilized to investigate main paths of road-induced noise. In order to evaluate road-induced booming noise exactly, all of tests mentioned above should be performed systematically.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.5
• /
• pp.709-716
• /
• 2020

Recently, the drone's equipment development and software technology have dramatically improved. With such developments, the applicability is increasing in various fields that require rapid geospatial information, and in practice, regulations and systems have been established, and the fields in use are increasing. Also, in Korea, corporations and public institutions are actually using and researching drones in fields such as aircraft development, communication technology development, construction site use, and surveying. However, there are no fields where drones are actually used in road construction sites. Therefore, in this study, to utilize drones that have been actively used in the civil engineering and construction fields for road construction, we investigated the current status of the Korea Highway Corporation's field drone use research and classified the possibility of drone introduction by road construction. Finally, a method of using drones at road construction sites was proposed to prepare a method for using drones at road construction sites.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.766-771
• /
• 2002

Automatic change detection based on the vector-to-raster comparison is hard especially in high-resolution image. This paper proposes a method to designate roads in high-resolution image in sequential manner using the information from vector map in which Hough transform is used for reliability. By its linearity, the road of urban areas in a vector map can be easily parameterized. Following some pre-processing to remove undesirable objects, we obtain the edge map of raster image. Then the edge map is transformed to a parameter space to find the selected road from vector map. The comparison is done in the parameter space to find the best matching. The set of parameters of a road from vector map is treated as the constraints to do matching. After designating the road, we may overlay it on the raster image for precise monitoring. The results can be used for detection of changes in road object in a semi-automatic fashion.

• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.1-12
• /
• 2015

PURPOSES : This paper presents a description of the current issues facing road managers regarding the surface-type conversion of low-volume roads for cost savings. METHODS: The paper reviews previous works conducted toward this end, acknowledges gaps in the current research, and lays out what information is needed for further studies. RESULTS : If the cost to maintain an unsurfaced road is less than the cost of maintaining a surfaced road, then there is potential for cost savings for the management agency. However, the problem is bigger than simply maintaining the roads that already exist. If unsurfaced roads prove to be more economical than surfaced roads, then the cost to convert from a surfaced to an unsurfaced roadway, and vice versa, when necessary, must also be examined. CONCLUSIONS : No other studies have addressed the un-surfacing of a road for cost savings, and it is therefore unknown whether substantial savings can be realistically obtained by converting from a surfaced to an unsurfaced road. To determine whether a conversion policy would be a viable option, additional data and research are needed.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1997.04a
• /
• pp.81-85
• /
• 1997

In a virtual environment, agents must demonstrate some degree of realism and interactivity. This paper discusses the algorithm that enables agents to navigate a virtual road network realistically and interactively. The road description files written in this language provide the information of road environments to the navigating agents and the scene visualizer. We call this navigating agent in the road an ambient car. The ambient cars must follow the traffic rules as human does. To do this, the ambient car should continuously check its circumstances, such as, the traffic lights, lanes, road signs, and other ambient cars. Because of the huge scale of road network and the large number of ambient cars, the algorithm considers only the area where the participant is currently located. By this locality, the performance of the whole system does not fluctuate much in different situations. The behavior of ambient cars according to the predefined rules may appear monotonous. We added probability distribution functions to introduce some randomness. We implemented the above idea on silicon Graphics Indigo 2 workstation. The ambient car exhibited its awareness of lanes, traffic lights, and other cars. The participants could hardly distinguish between a human-controlled car and computer-controlled ambient car generated by the algorithm.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.245-250
• /
• 2003

Digital Elevation Model(DEM) is basic spatial information used in various GIS areas such as spatial analysis, 3D modeling, etc. In particular, DEM of road inclined plane is need for the plan, design, construction and maintenance of social infrastructures such as roads and bridges in construction technology, one of GIS application. However, generating DEM of road inclined plane with high accuracy is very difficult. Therefore, the purpose of this study is to propose how to generate road DEM with high accuracy through extracting road inclined plane automatically using Laser scanning data.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.5
• /
• pp.327-333
• /
• 2003

Several tests are performed to evaluate road booming noise. Baseline test delivers the information of road noise characteristics. Coupling effect between structure and acoustics is obtained from the mode shapes and the natural frequencies by the modal test. Equivalent stiffness at joint areas between chassis and car-body system can be determined by the input point inertance test. Noise sensitivity of body mounting point of a chassis part can be obtained from the noise transfer function test with input point inertance test. Operational deflection shape makes us analyze the actual vibration modes of the chassis system under actual leading and find noise sources very easily. Finally, the transfer path analysis is used to Identify noise Paths through the chassis system. The objectives and the procedures of the tests are described in this Paper Also, the guideline for efficient road noise evaluation test can be found.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.6
• /
• pp.945-949
• /
• 2013

By using information about specific road grades, one can predict the power required by a vehicle. The prediction of the required power enables the driver to choose the driving route with the best fuel economy, which results in cost and energy savings. A clinometer is one of the more simple tools used to measure road grades, but requires significant time and effort. In this paper, a new method for measuring road grades from within a vehicle is proposed and experimentally verified.

• Proceedings of the IEEK Conference
• /
• 2002.06c
• /
• pp.143-146
• /
• 2002

The aim of this work is the real-time road edge detection using the fast processing of Cellular Analogic Parallel Processing Networks(CAPPN). The CAPPN is composed of 2D analog cell way. If the dynamic programming is implemented with the CAPPN, the optimal path can be detected in parallel manner Provided that fragments of road edge are utilized as the cost inverse(benefit) in the CAPPN-based optimal path algorithm, the CAPPN determines the most plausible path as the road edge line. Benefits of the proposed algorithm are the fast processing and the utilization of optimal technique to determine the road edge lines.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.4
• /
• pp.354-362
• /
• 2000

Increasing amount of road tragic in 90's has drawn much attention in Korea due to its influence on safety problems. Various types of data analyses are done in order to analyze the relationship between the severity of road traffic accident and driving conditions based on traffic accident records. Accurate results of such accident data analysis can provide crucial information for road accident prevention policy. In this paper, we apply several data fusion, ensemble and clustering algorithms in an effort to increase the accuracy of individual classifiers for the accident severity. An empirical study results indicated that clustering works best for road traffic accident classification in Korea.