• International Journal of Highway Engineering
• /
• v.15 no.1
• /
• pp.121-126
• /
• 2013

PURPOSES: Road Design Consistency Evaluation can guarantee road alignments with safety factors, however it can be hard work to deal with general car accident factors in only this evaluation index. Ideal Road Design Consistency Evaluation is show the mutual balance of road alignment and human factors with a variety of factors for road safety. METHODS: This study carried out overall road safety evaluations which are methods of running speeding consistency and car platoon safety analysis (driver's behaviors factors) as well. RESULTS: Out of 13 sections in a experimental road layout, safety factors of 8 sections showed 'Good' or 'Fair' status. However, 'Poor' results were found out in 5 sections. Particularly, it showed the different outcomes among the 4 evaluation methods used in this study. CONCLUSIONS: Road safety countermeasures were proposed for the potentially dangerous sections in road which failed to identify in the other methods. This study will contribute toward future study of more reliable Road Design Consistency Evaluation in the future for road safety.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.67-70
• /
• 2008

As a part of the project on road tunnel fire safety system development, Quantitative Risk Assessment program was developed. In this study, We carried out Quantitative Risk Assessment with this program by using a factor of cross passage interval, warning announcement time and congestion ratio etc for 1km tunnel with natural ventilation. In the case of 250m below of cross passage interval, Risk value due to warning announcement time was a slightly changed. but if cross passage interval is more than 250m, expected fatalities in the same HRR(heat release rate) was sharp increased. As a result, Quantitative Risk Assessment program which was developed in this research project is possible to risk assessment with ventilation type, cross passage for evacuation and detection system response property etc. hereafter, this program look forward to use as a tool for road tunnel performance based design.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.155-166
• /
• 2009

Road design safety assessment by existing tools and methods have normally been examined by expert judgements using design documents and on-site inspections. The existing methods, however, have two main problems such as insufficiency of objectiveness and inability to measure effects of accident countermeasures. This paper studies ways to develop a road safety assessment system through reviewing the IHSDM developed in USA. The crash prediction module of IHSDM calculate accident frequency and rate of roadway segments using accident prediction models and accident modification factors for safety evaluation. The methodology of evaluation and development of accident modification factors somewhat overcome the problems of the existing methods. In spite of these advantages, IHSDM could not relevantly reflect characteristics of domestic rural roadways since it overestimate the number of accidents and rate of korean rural roadways. Especially, IHSDM may not evaluate or consider land use patterns of Korean roadways, and futhermore, original environment on base conditions used to develop IHSDM may not be different from ours. The user requirements being developed for a road safety assessment system for Korean roadways include enhanced flexibility and diversity of data input-output processes.

• Journal of Environmental Science International
• /
• v.33 no.2
• /
• pp.169-178
• /
• 2024

This study aimed to investigate the impact of pavement design changes on user perceptions, with the objective of enhancing safety in urban streetscape. A total of 72 participants were recruited, and the study focused on alleyways in areas with a high risk of crime. Employing the Semantic Differential (SD) methodology, an assessment was conducted to gauge participants' perceptions of three different pavement types (A-type, B-type, C-type) as well as the existing pavement. The results indicated that the C-type pavement, characterized by vibrant and harmonious color palettes and patterns, elicited the highest levels of perceived safety, comfort, and openness among users. This signifies that physical environmental improvements through color design can mitigate the feelings of insecurity and foster emotional stability. Therefore it is recommended to implement various color schemes and pattern designs to road surface for enhancing user safety in high-risk urban areas.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.75-85
• /
• 2006

Currently, cross-section design can not reflect highway function and traffic volume, various construction. This research paper provides analysis of traffic accident type, improvement of traffic operation and safety, assessment for new cross-section standards of two-lane highway. Research show higher accident rate on 6$\sim$8.9m road than 9$\sim$12.9m road width in two-lane highway. Typical improvement is widening on lane and shoulder width. Simulation show large increase on 6$\sim$7m road delay-time in 1,200vph. In contrast 10$\sim$11.5m road shows slight change on delay-time. This research paper provides various cross-section construction by traffic volume in minor arterial and distributor two-lane highway. The new cross-section design provides adopting highway volume, various construction and flexibility.

• Journal of the Korean Society of Systems Engineering
• /
• v.1 no.1
• /
• pp.39-45
• /
• 2005

Systems Engineering is the process that controls the technical system development effort with the goal of achieving an optimum balance of all system elements. FRACAS(Failure Reporting an d Corrective Action System) is one of RAMS(Reliability, Availability, Maintainability, Safety) tasks which is conducted from a manufacturing phase. FRACAS is to determine the basic cause of failure resulting from design or manufacture, and to provide a closed-loop method of implementing corrective action. This paper presents the FRACAS established for assessment of the reliability, the analysis and management of the failure data for Korean High Speed Train and application cases.

• Journal of Auto-vehicle Safety Association
• /
• v.6 no.2
• /
• pp.23-28
• /
• 2014

Commercial vehicle ESC assessment for curvature road was conducted. The previous study of ESC activation condition for losing controllability utilizing the test protocols of double lane change and sine with dwell method was conducted without considering the geometric complexity of roadway design. Since critical rollover accidents were frequently observed in the exit ramp zone, variety of curve, slope and bank have been added for analysis conditions. Detailed feature of the ramp including location, dimension and design characteristics have been analyzed from the typical trumpet type ramp design. Analyzing accident data from 2008, two specific ramps have been selected due to their complexity in design and severity in steering operation.

• Journal of Auto-vehicle Safety Association
• /
• v.7 no.4
• /
• pp.26-30
• /
• 2015

Exceeding the speed limit during vehicle driving is a key factor in the severity of lots of road accidents, and SLIF(Speed Limit Information Function) application is in the initial phase in Korea. SLIF helps the drivers to observe a speed limit when they are driving by providing alert and informing the current limit speed information based on external data using camera and/or digital map, for that reason, environmental conditions could be causes of SLIF malfunctions. In this study, design adequacy analysis of SLIF in respect of false recognition as the Korea traffic environment has been performed. As tentative results, road conditions and structure of speed limit sign as well as system performance often caused misrecognition.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.551-555
• /
• 2009

This study is performed to apply a standard to evaluate fire protection assessment for tunnel structures when a fire breaks out in the road tunnel. Recently, a number of road tunnels have been rapidly increased and fire risk also multiplyed according to extend tunnel length, due to natural features and environmentally-friendly road construction in Korea. But we have not yet been prescribed appropriate time-temperature curve for tunnel fire. Therefore, we presented fire design model and investigated time-temperature curve proposed by a foreign country considering traffic, a kinds of vehicles which are a basis of heat rate. At the end, Hydrocarbon modified curve applied as design fire model by using numerical analysis and presented design fire model and examined the effects of tunnel structures.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.19 no.2
• /
• pp.101-106
• /
• 2024

For the commercialization of automated vehicles, it is necessary to create various scenarios that can evaluate driving safety and establish a data system that can verify them. Depending on the vehicle's ODD (Operational Design Domain), there are numerous scenarios with various parameters indicating vehicle driving conditions, but no systematic methodology has been proposed to create and combine scenarios to test them. Therefore, projects are actively underway abroad to establish a scenario library for real-world testing or simulation of autonomous vehicles. However, since it is difficult to obtain data, research is being conducted based on simulations that simulate real road. Therefore, in this study, parameters calculated through individual vehicle trajectory data extracted based on roadside CCTV image-based driving environment DB was proposed through the extracted data. This study can be used as basic data for safety standards for scenarios representing various driving behaviors.