• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2004년도 춘계 학술발표대회 논문집
• /
• pp.332-333
• /
• 2004

• 한국안전학회지
• /
• 제25권6호
• /
• pp.186-196
• /
• 2010

It has been well known that traffic accidents occur under combined functional contributions of drivers, vehicles and road facilities, and that evaluation of safety levels for a specific road section or point is generally much complicated. Additionally, most of traffic accidents occur randomly implicating it is necessary to be evaluated in terms of probability theory. Thus, the evaluation model which reflects various characteristics and probabilistic distributions of traffic accidents has been necessary. The present paper provides a reliability based model with variables of probabilistic operating speeds and design speeds together which have been individually explaining associated characteristics in traffic accidents. Consequently, the model made it possible for speed management and road improvement projects to be evaluated in a common index. Application studies were performed in three cases. Through the studies, couples of facts were identified that the model successfully considered the probabilistic operating speeds and design speeds together and that then, the model evaluated road safety alternatives relatively which are complicatedly characterized and differently located.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2005년도 추계학술대회 및 정기총회
• /
• pp.138-143
• /
• 2005

In order to reduce traffic accident, the interaction between drivers and roads should be studied in drivers' behaviour standpoints, and then this must be applied to the establishment of the road design standard. The K-ROADS(KICT-Road Analysis Driving Simulator) was developed to analyze and evaluate the road safety at the project HuRoSAS(Human & Road Safety Analysis System), since 2003. This has two distinct functions. One is the visual system which has 360 degree F.O.V. to reduce a dead angle on black spots as at-grade intersection. The other is the motion system which reproduce high frequency vibration made in irregular road surface and vehicle's motion. The K-ROADS has been used the study on the effect of alternatives of speed hump, and the study on the interior wall design of long tunnel to safety standpoints.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.113-126
• /
• 2017

PURPOSES : This study proposes standards for rural access road pavement section and thickness design considering existing access road construction conditions; the study also proposes a complementary policy that can be used for design convenience. METHODS : Various literature review and case studies had been performed in terms of rural access road section and thickness design, both domestically and internationally, and this was followed by domestic rural access road field surveys. KPRP and KENLAYER were used to analyze the commonalities and predict the remaining life. Data on real cost is used to select an appropriate construction method through economic analysis. RESULTS : The economic efficiency of concrete pavement ($15{\times}15$) was the highest in terms of economic efficiency of performance life and traffic volume. In the case of asphalt pavement, it is considered that the most economical method is to implement micro-surfacing method four times as a preventive maintenance method (once every 10 years and 4.5 years for asphalt concrete pavement and MS construction method, respectively). Repairable asphalt pavement is advantageous for areas where heavy vehicles are expected to pass. In the case of other general areas, it is considered economical to place concrete ($15{\times}15$) pavement. However, as analytical results on its performance life are unavailable, it is to be considered for study in the future. CONCLUSIONS : This study proposed interim design guidelines based on various domestic and international design guidelines and case studies. However, in order to develop the final design criteria applicable to the field, it is necessary to (a) estimate the bearing capacity of the lower level of the pavement at various sites, (b) estimate the daily traffic volume, (c) implement advanced low-cost pavement technologies, and (d) propose maintenance standards and techniques for long-term performance.

• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.73-79
• /
• 1998

For the design and development of the wheel type excavator, the dynamic effects of travelling on the performance of the equipment should be first analyzed and conside- red in the initial design stage. In order to test the durability of the equipment in a short period, th travelling test should be performed over accelerated durability test tracks. which is more severe than general field roads such as city road, paved road, unpaved road and rough road. In this paper, a parametric study is performed in order to determine important design parameters of durability test track of a wheel type excavator. A rigid body model is developed using DADS and dynamic analysis is performed for the equipment travelling over several test roads with different severity. A comparison of test and analysis results is also presented.

• 한국환경과학회지
• /
• 제21권4호
• /
• pp.391-399
• /
• 2012

This study proposes lighting simulation approach to assess lighting quality on motor ways and walk ways considering each type of form and growth of roadside trees. Simulation approach to assess quality of lighting is frequently used for lighting design which guarantees secure of drivers and pedestrians during the night time. But, road side trees which have diverse benefits for citizens acts on obstacles during night time needs lighting. The results of this study shows a possible way for tuning the aims of both lighting and road side tree. It will be possible to develop harmonic design standards for road way lighting if further study achieved based on the result of this study.

• 한국공작기계학회논문집
• /
• 제14권5호
• /
• pp.55-61
• /
• 2005

In this paper, we propose the visual simulation system for virtual reality motion rider system. The visual simulation system can apply verity virtual reality system. This paper deals with programs on 3D automatic creation of terrain, road design, and a realtime rendering program for the virtual reality system. For the 3D automatic creation of terrain, DEM data and rectangular grid method are applied. We can make two different road object with the road design program. One of them includes road definition, and the other is obtained by using 'NURBS curve.' Visual simulation is consisted by additional modeling and real-time rendering. We can apply the programs made in this way to visual system of driving simulator.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.485-488
• /
• 2008

The structure supporting road sign is a road information facility for ensuring the safe transportation and smooth traffic. But, lots of road information facilities were damaged by the typhoon "Maemi" in 2003. Such damaged facilities should be rehabilitated and could increase economic loss by causing traffic accident. Therefore, in this study, behavior that reduce wind load and improve wind resistance of the structure supporting road sign are studied about wind load beyond design specification by abnormal climate as below. The first is wind load reducing technique such that shear key resist wind load that is not greater than design wind speed but in case that it is over the design wind limit, column member is rotated on the inner steel pipe axis by the brittle failure of shear key. The second is the technique such that fail-safe the overturning of road sign panel by equipment installation in the vertical member. The third is the technique of installing stiffening plate inside the vertical member to relieve stress concentration.

• Elastomers and Composites
• /
• 제52권3호
• /
• pp.216-223
• /
• 2017

The additive manufacturing technology, also called 3D printing, is growing fast. There are several methods for 3D printing. Fused deposition modeling (FDM) type 3D printing is the most popular method because it is simple and inexpensive. Moreover, it can be used for printing various thermoplastic materials. However, it contains the cooling of layered road and causes thermal shrinkage. Thermal shrinkage should be controlled to obtain high-quality products. In this study, temperature distribution and cooling behavior of a layered road with cooling are studied through computer simulation. The thermal shrinkage of the layered road was simulated using the calculated temperature distribution with time. Shape variation of the layered road was predicted as cooling proceeded. Stress between the bed and the layered road was also predicted.This stress was considered as the detaching stress of the layered road from the bed. The simulations were performed for various thermal conductivities and temperatures of the layered road, bed temperature, and chamber temperature of a 3D printer. The simulation results provide detailed information about the layered road for FDM type 3D printing under operational conditions.

• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.1195-1203
• /
• 2014

최근 표준으로 등록된 IFC(Industry Foundation Classes)4는 건축시설의 형상요소 표현에 한정될 뿐 도로, 교량 및 터널 등의 토목시설에 대한 형상표준을 정의하고 있지 않아 여전히 토목 형상모델의 교환을 위한 상호운용성에 제약이 있다. 특히 도로시설은 중심선형에 따라 모델링되는 선형적 특성을 가지며, 프로젝트 별로 형상이 서로 상이하여 표준화된 도로정보모델을 구축하는 것이 곤란하다. 따라서 본 연구에서는 도로의 형상정보모델 개발을 위해 3차원 설계 프로세스 관점에서 도로를 구성하는 구조요소 및 속성을 도출하는 것이 목적이다. 이를 위해 본 연구는 도로설계를 위해 활용되는 도로설계편람, 지침, 시방서 및 기하설계 기준 등의 정보를 분석하여 도로 구조물의 형상 요소와 속성을 추출한다. 도출된 형상은 엔티티(Entity) 항목으로 정의하고 가상 도로모델을 통해 정의된 도로 형상모델의 위계구조를 검토한다. 도출된 도로의 세부 구조 요소 및 속성은 인프라 분야의 BIM(Building Information Modeling)환경을 구축하기 위한 3차원 형상정보로 활용되며, 도로의 구체적인 형상, 타입 및 속성을 세분화하여 도로분야의 IFC로 확장하기 위한 기초자료로 활용될 것으로 기대된다.