• 한국소음진동공학회논문집
• /
• 제20권4호
• /
• pp.381-389
• /
• 2010

Modern military equipments are often required to be mounted on a truck for their survivability and operation performance. Special units installed on the truck at times experience serious shock vibration caused by obstacles of road and/or uncommon road shape. It is then essential to analyze the travel performance of truck-mounted special units for their survivability and performance. In this paper, shock responses of the equipments subjected to bump passing and wash board road are experimentally obtained and also analyzed via FEM. Modified bump configuration and road profile considering the interface with tire are suggested. Analytical results considering this modification show good agreement with test results.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.91-96
• /
• 2001

When it is considered that many vehicle rides on the road and ride quality is an important method to evaluate vehicle performance with handling, running-over-bump manoeuvre may be suitable for testing ride quality. In this paper, a computed model has roughly steering system and lumped mass, connected by joint each rigid body, and suspension that has beam elements and has shock absorber as force element to represent nonlinear characteristics. A computer simulations for passing over a bump were made with two velocities. One side of vehicle passed over bump in due consideration of driver's habit that driver is subject to avoid a bad ride quality. On simulation, vertical acceleration, pitch angle and roll angle were measured at the mass center of chassis each case.

• 동력기계공학회지
• /
• 제13권5호
• /
• pp.40-45
• /
• 2009

This article deals with the transient analysis using multi-flexible body dynamics of a trailer vehicle, which is passing a bump on the flat road. In order to investigate the transient dynamic behavior of the trailer, we developed an equivalent finite element model for the trailer and a vehicle dynamic model for the truck using multi-body dynamics. The driving condition considered here is set as the trailer vehicle passes a bump on the flat road in 7km/h. And we investigate the time histories of vertical load and deflections on connecting points between the trailer and truck during the vehicle passes a bump. Due to the dynamic load resulted from the driving condition, additional stress concentrations are found in the trailer and the suspension connecting points between the trailer and rear axles along with kingpin.

• 제어로봇시스템학회논문지
• /
• 제18권1호
• /
• pp.62-68
• /
• 2012

In this paper, a detection method of a pedestrian safety road marking was proposed. The proposed algorithm uses laser range and reflectivity of a range finder (LRF). For a detection of crosswalk marking and stop line, the DFT (Discrete Fourier Transform) of reflectivity and cross-correlation method between the reference replica and the measured reflectivity are used. A speed bump is detected through measuring an altitude difference of two LRFs which have the different tilted angle. Furthermore, we proposed a velocity constrained a detection method of a speed bump. Finally, the proposed methods are tested in on-line, on the pavement of a road. The considered road markings are wholly detected. The localization errors of both road markings are smaller than 0.4 meter.

• 대한공간정보학회지
• /
• 제21권3호
• /
• pp.55-62
• /
• 2013

본 연구에서는 전방위 카메라(Omni-directional Camera)를 이용하여 과속방지턱(Speed Bump)을 탐지하고 Vision Based Approach 통한 실시간 과속 방지턱 데이터의 갱신 방안을 제시하는 것을 목적으로 한다. 카메라 영상정보에서 과속 방지턱을 검출하기 위해 잡음을 제거하고 이를 구성하는 형상과 패턴으로 여겨지는 점들을 우선적으로 탐지하여야 한다. 과속방지턱은 일정한 폭과 규칙적인 형태를 유지하며 흰색과 노란색의 영역을 가지고 있음에 착안하여 침식과 팽창을 이용한 형태학적 연산과 HSV칼라 모델을 적용하여 도로상의 과속방지턱을 추출하였다. 카메라에서 거대한 이미지 데이터를 수집하여 대상 객체를 검출하고 GPS 위치 정보를 이용하였다. 마지막으로 동시적 위치추정 및 지도작성 (SLAMs :Simultaneous Localization And Mapping) 시스템을 구현하여 탐지알고리즘과 취득결과의 정확성을 평가하였다.

• 한국소음진동공학회논문집
• /
• 제15권10호
• /
• pp.1202-1210
• /
• 2005

This paper develops a computer model for estimating the bump characterisitcs of a cat)over type large-sized truck. The truck is composed of front and rear suspension systems, a frame, a cab, and ten tires. The computer model is developed using MSC.ADAMS. A shock absorber, a rubber bush, and a leaf spring affect a lot on the dynamic characteristic of the vehicle. Their stiffness and damping coefficient are measured and used as input data of the computer model. Leaf springs in the front and rear suspension systems are modeled by dividing them three links and joining them with joints. To improve the reliability of the developed computer model, the frame is considered as a flexible body. Thus, the frame is modeled by finite elements using MSC.PATRAN. A mode analysis is performed with the frame model using MSC.NASTRAN in order to link the frame model to the computer model. To verify the reliability of the developed computer model, a double wheel bump test is performed with an actual vehicle. In the double wheel bump, vortical displacement, velocity, acceleration are measured. Those test results are compared with the simulation results.

• 한국군사과학기술학회지
• /
• 제3권2호
• /
• pp.15-22
• /
• 2000

Shock and vibration characteristics of a tractor-trailer type vehicle system with air suspension and air coupler running on a single bump road are investigated. The vehicle system is modelled and solved to two types of models, i.e. rigid-multi-body and flexible-multi-body model, by ADAMS and NASTRAN software. And the shock impulse is given by a single bump model on the road. When the analysis results of the rigid-multi-body model is compared with those of the flexible-multi-body model, it is revealed that the vibration and accelerations of the latter model are more repetitive and larger than the former.

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2009년도 추계학술대회 논문집
• /
• pp.407-412
• /
• 2009

• Steel and Composite Structures
• /
• 제45권5호
• /
• pp.697-713
• /
• 2022

In the context of the finite elements method, the dynamic behavior of porous functionally graded double wishbone vehicle suspension structural system incorporating joints flexibility constraints under road bump excitation is studied and analyzed. The functionally graded material properties distribution through the thickness direction is simulated by the power law including the porosity effect. To explore the porosity effects, both classical and adopted porosity models are considered based on even porosity distribution pattern. The dynamic equations of motion are derived based on the Hamiltonian principle. Closed forms of the inertia and material stiffness components are derived. Based on the plane frame isoparametric Timoshenko beam element, the dynamic finite elements equations are developed incorporating joint flexibilities constraints. The Newmark's implicit direct integration methodology is utilized to obtain the transient vibration time response under road bump excitation. The presented procedure is validated by comparing the computational model results with the available numerical solutions and an excellent agreement is observed. Obtained results show that the decrease of porosity percentage and material graduation tends to decrease the deflection as well as the resulting stresses of the control arms thus improving the dynamic performance and increasing the service lifetime of the control arms.

• 디지털융복합연구
• /
• 제14권5호
• /
• pp.325-331
• /
• 2016

야간에 가로등이 없는 지방 국도 또는 우천시에 과속 방지턱이 보이질 않아 과속방지턱에 거의 근접하여 급 브레이크를 밟는 경우가 종종 발생하여 사고가 발생한다. 또한, 논 또는 밭과 인접한 지방 국도의 경우 농작물의 피해를 줄이고자 가로등 설치를 못하는 실정이다. 이 경우 야간에 사람들이 길을 다니는 경우 특히 검은색 계열의 옷을 입고 다니는 경우 사람의 존재를 운전자가 인식하지 못해 잦은 사고가 발생한다. 이 경우, 파장이 긴 색깔의 LED 가로등을 설치하면 농작물의 피해를 주지 않고 사람의 존재만 구별할 수 있어 교통사고를 줄일 수 있다. 따라서, 본 논문에서는 이를 위하여 과속방지턱에 LED를 부착하여 점등함로써 사전의 속도를 줄여 사고를 줄일 수 있고 또한 농작물에 피해를 주지 않으면서 인사 교통사고를 줄일 수 있는 태양광 및 압전소자를 이용한 절전형 LED 자동점등 지방국도(논로) 교통사고 방지 및 과속방지턱 겸용 가로등을 개발하였다. 태양광 및 압전소자를 이용 전력을 축척하여 LED를 점등하는 방식으로 조도센서를 사용하지 않고 태양광 소자의 에너지 축적 여부를 이용하여 LED를 ON/OFF한다. 또한 압전소자도 이용함으로써 여름철 장마에 태양광에 의한 축적이 부족한 경우를 대비할 수 있고, 또한 저전력 설계를 구현하여 최소 3일 이상 무충전시에도 정상 작동하도록 구현하였다.