• Journal of Korean Society on Water Environment
• /
• v.25 no.1
• /
• pp.48-57
• /
• 2009

A two-dimensional (2D), laterally-averaged hydrodynamic and water quality model, CE-QUAL-W2 was applied to evaluate the performance on simulating the effect of flushing from Daecheong Reservoir on the downstream water quality variations during the flushing events held on November, 2003 and March, 2008. The hydraulic and water quality simulation results were compared with field measurement data, as well as a one-dimensional (1D), unsteady model (KORIV1) that revealed limited capability in the previous study due to missing the resuspension process of river bottom sediments. The results showed that although the 2D model made satisfactory performance in reproducing the temporal variations of dissolved matters including phosphate, ammonia and nitrate, it revealed poor performance in simulating the increase of biological oxygen demand and suspended sediment (SS) concentrations during the passage of the flushing flow. The reason of the error was that the resuspension process of the 2D model is only the function of shear stress induced by wind. In reality, however, as shown by significant correlation between bottom shear stress ($\tau$) and observed SS concentration, the resuspension process can be significantly influenced by current velocity in the riverine system, especially during flushing event. The results indicate that the resuspension of river bottom materials should be incorporated into the water quality modeling processes if $\tau$ is greater than a critical shear stress (${\tau}_c$) for better simulation of flushing effect.

• Journal of Korean Society on Water Environment
• /
• v.31 no.2
• /
• pp.159-165
• /
• 2015

The organic matter sources of phytoplankton and related environmental factors influencing algal bloom in Paldang reservoir were studied using nitrogen and carbon isotope ratio(${\delta}^{15}N$, ${\delta}^{13}C$). Phytoplankton samples for stable isotope analysis were collected from four points in reservoir using a plankton net. Physicochemical water quality, algal taxa and hydrological data were collected from published monitoring material. Phytoplankton samples were analyzed by IRMS. CN ratio of each sample was very similar to that of phytoplankton from literature cited. ${\delta}^{15}N$ of each sample was decreased during July. Mixing and dilution of nitrogen sources due to increment of influx by concentrated rainfall were considered as the main reason for the decline of ${\delta}^{15}N$. Based on analyzed ${\delta}^{15}N$ value of each sample, nitrogen source of Bughan river sample was presumed to come from soil. The nitrogen sources of Namhan river and Kyeongan stream samples seemed to be sewage or animal waste. Low ${\delta}^{15}N$ value in August (2012) seemed to be influenced by isotope fractionation due to the blooming of nitrogen-fixation blue-green algae (Anabaena spp.). Variation in ${\delta}^{15}N$ values particularly by blue-green algal bloom was considered the important factor for estimating the organic matter sources of phytoplankton.

• Korean Journal of Plant Taxonomy
• /
• v.40 no.4
• /
• pp.247-250
• /
• 2010

We report Polygonum plebeium R.Br. (Polygonaceae) as an unrecorded species from the Geumgang River, Buyeo-gun; Galmae-dong, Guri-si; the Chungju Reservoir, Jecheon-si; the Daecheong Reservoir, Okcheon-gun; and the Daecheong Reservoir, Daejeon, in Korea. It is distinguished from P. aviculare by pedicels that articulate in the middle and by its smooth and shiny achenes. The new Korean name, 'Ae-Gi-Ma-Di-Pul', is given considering the small-sized plant. In this study, a description and illustrations of the species and photos of the habitat are provided.

• Journal of Korean Society on Water Environment
• /
• v.21 no.3
• /
• pp.277-283
• /
• 2005

This paper aimed to compare the daily water quality as well as the hydrological data gathered for the past two years (2000 to 2001) between the two influent rivers of Paldang reservoir. The analysis also has been carried out to draw out the factors that affect the water quality at the dam site, where the main drinking water drawing point is located. The relationship between total amount of monthly rainfall and monthly inflow showed $r^2=0.74$ (p<0.05). The highest peak of inflow of influent rivers recorded in August and September (in the year of 2000) and July and August (2001). Average inflows of influent rivers in 2000 and 2001 are calculated at 209.0, 161.5 CMS (Bughangang), 268.6, 148.2 CMS(Namhangang), and 7.8, 5.0 CMS (Gyeongancheon). The formula which was driven from the relationship between inflow and COD load of influent rivers, explained that COD concentration in general increased with the inflow. But during the rainy seasons (July, August, and September), COD concentration decreased according to the increase of inflow. The daily rainfall and COD concentration(or load) during the rainy season (August and September in the year of 2000, July and August in 2001) indicated that the peak of COD load correspond with the rainfall, which decreased sharply after 3 or 4 days. The reason was thought that the high COD load was diluted rapidly by the rain flow. Water temperature, pH and conductivity measured at dam site decreased obviously when the inflow sharply increased. Peak period of total phosphorus concentration coincided with that of inflow. In rainy season, chlorophyll-a concentration decreased obviously as the inflow increased. The reason can be ascribed to the flushing effect caused by the operation of floodgate.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.11 no.4
• /
• pp.133-144
• /
• 2006

It is investigated using ADCIRC model to find an optimal gate operation in order to maintain target water level of the inner Saemangeum Reservoir. Various developing procedures and river inflows conditions are considered in modeling. For the gate operations, consecutive openings to inflow and outflow, such as once a day, twice a day and once per two days are considered. However water level increases gradually due to river inflows regardless of gate operations. In order to maintain target level 0.0 m, it is recommended to shut down of gate in order to prevent inflows of outer sea water at least once per 6 days for normal riverine inflows and once per 3 days for flood inflows during consecutive operations. Then it is balanced within maximum of ${\pm}0.4m$ of deviations from target level of 0.0 meter.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.5
• /
• pp.836-841
• /
• 2012

Distributions and growth of submerged plants with water level were investigated in a flood control reservoir around Dongbok Lake. In adddition, the total amount of biomass and uptakes of plants per unit area ($m^2$) in the flood control reservoir were investigated. The total vegetation area was $156,871m^2$ in the Dongbok flood control reservoir ($209,160m^2$) before flooding. By July 11, the Dongbok flood control reservoir was flooded during rainy season except for upper area. Dominant plants were CRXDM (Carex dimorpholepis Steud), ECHCF (Echinochloa crusgalli), POLHY (Polygonum hydropiper L) and BROTE (Bromus tectorum L) which occupied 75% of the flood control reservoir. The total amounts of organic matter uptakes per unit area ($m^2$) with distribution rates by CRXDM, ECHCF, POLHY and BROTE under different submerged plants were 65.5, 6.8, 7.0 and 13.0%, respectively. The total amount of nitrogen uptakes per unit area ($m^2$) with distribution rates at different submerged plants were in the order of CRXDM ($1.30g\;m^{-2}$) > POLHY ($0.34g\;m^{-2}$) > BROTE ($0.30g\;m^{-2}$) > ECHCF ($0.25g\;m^{-2}$). The total amounts of phosphorus uptakes per unit area ($m^2$) with distribution rates at different submerged plants were great in the order of CRXDM (51.8%) > BROTE (17.7%) > POLHY (10.3%) > ECHCF (9.6%). Thus, the results of this study suggest that O.M, T-N and T-P by submerged plants in Dongbok Lake were strongly influenced at water quality in flood control reservoir.

• The Korean Journal of Petroleum Geology
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2008

As conventional oil and gas reservoirs become depleted, interests for oil sands has rapidly increased in the last decade. Oil sands are mixture of bitumen, water, and host sediments of sand and clay. Most oil sand is unconsolidated sand that is held together by bitumen. Bitumen has hydrocarbon in situ viscosity of >10,000 centipoises (cP) at reservoir condition and has API gravity between $8-14^{\circ}$. The largest oil sand deposits are in Alberta and Saskatchewan, Canada. The reverves are approximated at 1.7 trillion barrels of initial oil-in-place and 173 billion barrels of remaining established reserves. Alberta has a number of oil sands deposits which are grouped into three oil sand development areas - the Athabasca, Cold Lake, and Peace River, with the largest current bitumen production from Athabasca. Principal oil sands deposits consist of the McMurray Fm and Wabiskaw Mbr in Athabasca area, the Gething and Bluesky formations in Peace River area, and relatively thin multi-reservoir deposits of McMurray, Clearwater, and Grand Rapid formations in Cold Lake area. The reservoir sediments were deposited in the foreland basin (Western Canada Sedimentary Basin) formed by collision between the Pacific and North America plates and the subsequent thrusting movements in the Mesozoic. The deposits are underlain by basement rocks of Paleozoic carbonates with highly variable topography. The oil sands deposits were formed during the Early Cretaceous transgression which occurred along the Cretaceous Interior Seaway in North America. The oil-sands-hosting McMurray and Wabiskaw deposits in the Athabasca area consist of the lower fluvial and the upper estuarine-offshore sediments, reflecting the broad and overall transgression. The deposits are characterized by facies heterogeneity of channelized reservoir sands and non-reservoir muds. Main reservoir bodies of the McMurray Formation are fluvial and estuarine channel-point bar complexes which are interbedded with fine-grained deposits formed in floodplain, tidal flat, and estuarine bay. The Wabiskaw deposits (basal member of the Clearwater Formation) commonly comprise sheet-shaped offshore muds and sands, but occasionally show deep-incision into the McMurray deposits, forming channelized reservoir sand bodies of oil sands. In Canada, bitumen of oil sands deposits is produced by surface mining or in-situ thermal recovery processes. Bitumen sands recovered by surface mining are changed into synthetic crude oil through extraction and upgrading processes. On the other hand, bitumen produced by in-situ thermal recovery is transported to refinery only through bitumen blending process. The in-situ thermal recovery technology is represented by Steam-Assisted Gravity Drainage and Cyclic Steam Stimulation. These technologies are based on steam injection into bitumen sand reservoirs for increase in reservoir in-situ temperature and in bitumen mobility. In oil sands reservoirs, efficiency for steam propagation is controlled mainly by reservoir geology. Accordingly, understanding of geological factors and characteristics of oil sands reservoir deposits is prerequisite for well-designed development planning and effective bitumen production. As significant geological factors and characteristics in oil sands reservoir deposits, this study suggests (1) pay of bitumen sands and connectivity, (2) bitumen content and saturation, (3) geologic structure, (4) distribution of mud baffles and plugs, (5) thickness and lateral continuity of mud interbeds, (6) distribution of water-saturated sands, (7) distribution of gas-saturated sands, (8) direction of lateral accretion of point bar, (9) distribution of diagenetic layers and nodules, and (10) texture and fabric change within reservoir sand body.

• Journal of Environmental Impact Assessment
• /
• v.20 no.1
• /
• pp.37-48
• /
• 2011

Recently, the social and environmental functions of nature river are important due to the increase of expectation for river restoration. So it should be considered the effect of vegetation affecting the conveyance capacity and hydraulic resistance. However, it has not yet proposed a objective standard and modeling method to estimate the effect of conveyance capacity according to vegetaion distribution in the watercourse such as water level or velocity. Therefore, this study simulates the variations of water level and velocity using 3-dimensional hydrodynamic model, EFDC, to consider a conveyance capacity in downstream of the Soyang Reservoir. The simulation results were validated using statistical index such as F-test and T-test. As results, the water level rises about 0.01 to 0.47m and velocity difference are about -0.95m/s to 0.23m/s.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.3
• /
• pp.1-7
• /
• 2013

The dam plan quantity of constructive and water supply quantity of present time are showing a difference with change in climate and augmentation of water demand for multipurpose dams in Nakdong river basin. But revaluates a water supply ability the method or the process is official for is not taking a position, so actual condition applies the plan quantity of dam constructive. Considers various situation of actual multipurpose dam from research sees consequently and in K-WEAP is an integrated water resources evaluation plan model applies as water permit availability multipurpose dam, currently water permit availability comparison, analyzed. In this study, the natural daily flow data and apply the dimensions of the reservoir, and for more than 30 years of the long-term water balance analysis conducted by Date Nakdong river basin can supply reservoirs are large quantity of permits available is presented.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42
• /
• pp.1-8
• /
• 2000

To examine the irrigation water uses in Sunjin river basin, existing status and operation records of headworks facilities including reservoirs, pumping stations, tube wells, and diversion dams were surveyed and analyzed for the period of 1994∼1998. Daily irrigation demand and water use were estimated for the irrigated paddy field using penman equation, Thank model, reservoir water balance model and daily pumping rate of pumping stations. Irrigation water use from multi-purpose dams in the basin was not included in this study.