• Journal of Korea Water Resources Association
• /
• v.31 no.5
• /
• pp.575-586
• /
• 1998

A relaxed similarity theory which can be applied to river models with movable beds is established by modifying existing theory by Einstein and chien(1954). Experimental data collected from river models with movable beds were used to evaluate the applicability of the proposed theory. Effects of similarity of flow, ΔFΔM, and similarity of sediment movement, ΔFs, were examined by analyzing the behaviour of total river-bed change. The results show that the smaller ΔFΔM or ΔFs is, respectively, the larger total sedimentation is. The modified similarity theory established in this study would be useful and practical whenever it is impossible or very difficult to satisfy strict theoretical requirements concerning the river model experiments with movable beds. Keywords : river model, similarity of flow, similarity of sediment movement, sediment transport, river-bed change.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.133-136
• /
• 2004

In-situ collection experiments were performed to analyze inflowing sedilnents behavior as a basic study of topographical change in Nakdong River Estuary. Sediment rate and bed load flux ranged from 0.0004 to $0.472\;g/cm^2/day\;and\;0.0005\~1.7579\;g/cm^2/day$, respectively. The settling velocity of suspended particulate matter was estimated in tire range of $0.339\~1.010\;cm/sec$, The grain size analysis shows that surface sediments in backside of sandbar and bed load in front of dike have a similar grain size distribution. It is considered that the source of surface sediments in backside of sandbar were flowed in from Nakdong River. In order to verify the characteristics of inflowing sediments behavior, detailed surveys around Nakdong River Estuary need to be carried out, continuously.

• Journal of Korea Water Resources Association
• /
• v.43 no.11
• /
• pp.977-984
• /
• 2010

In order to determine the optimal sediment discharge formula for Hyeongsan river, some statistical approaches have been applied to analyze the simulated results of long-term bed change by HEC-6. The field measurements have been conducted to obtain the data for model calibration and verification such as sediment discharge, bed material, and channel geometry. Several sediment discharge formulae have been verified according to the bias, RMSE, RRMSE, discrepancy ratio, and S/N ratio of bed change along the thalweg. Comparing the formulae, Laursen formula(modified by Copeland) have shown the best performance to simulate the long-term bed change of Hyeongsan river.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1335-1339
• /
• 2004

A hydro-geomorphologic change in a sand bed channel reach and vegetation expansion by changes in the How regime is analyzed in this study. Field and aerial photo surveys, basic hydrological analysis about flow regime change due to two dams, Andong Dam and Imha Dam, on the upstream river and computer modeling are conducted. Two Dams in the study reach have obviously affected downstream channel in many ways including the bed particle coarsening, vegetation expansion on the sandbars and following river channel braiding. The phenomenon of no vegetation on the large point bar in front of Hahwe Village seems due to disturbance of the sandbar surface probably due to the cross flow in the meander reach during the flood. Another reason for no vegetation is that the sandbar on this reach has lower subsurface water lovels, as compared with the others in the up- and downstream of the reach where vegetation expanded, which would hinder vegetation from germinating and growing on the sandbar.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.103-108
• /
• 2008

Riverbed change is greatly influenced by artificial factors such as dam construction, gravel collection, and river improvement. This study simulated a long-term bed change based on the GSTARS3 model using actual data from the area downstream of the Geum River Daecheong Dam and compared the estimation with a section of the actual measurement. As a result, it was found that the section of the actual measurement was far lower than the result of the simulation in terms of long-term bed change. While the area downstream of Daecheong Dam displayed approximately an average of 2.29 m of streambed degradation on average while the upper stream area showed approximately 0.63 m of bed degradation over 24 years. In the simulation of the area downstream of Daecheong Dam based on the GSTARS3 model, similar bed degradation was observed. However, a great difference was detected between the result and the actual measurement. According to the cause analysis, the riverbed in the area downstream of Daecheong Dam has continuously degraded due to the dam construction and mass collection of gravel. The mass collection of gravel was the main cause of riverbed change. It was found that about 76% of all riverbed degradation was caused by the mass collection of gravel.

• Journal of Wetlands Research
• /
• v.8 no.3
• /
• pp.91-103
• /
• 2006

The objective of this study is to analyze the characteristics of flow and bed change at the wide, shallow confluence of the Geum river and Mihocheon, which has different bed slope, height, and sediment concentration condition between the main channel and tributary. RMA-2 and SED2D were used to simulate flow and bed changes at the site. Flow simulations showed that the overall flow velocity, shear layer and vortex generated at the left bank of the confluence increase as the discharge was increased. Sediment transport simulations indicated that because of the high inflow sediment concentration from Mihocheon, sediment concentration in the main river increases after the confluence, the high sediment concentration band was kept along the shear layer boundary and the left bed was aggraded after confluence.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.1
• /
• pp.115-121
• /
• 2009

It is to use effectively for stream channel and watershed management as the prediction and the analysis of bed changes characteristics in the Seomjin river downstream. The necessary data (section, bed composition material, pivot point water elevation, coefficient of roughness) with regard to analysis of the bed changes characteristics were based upon the survey data and analysis results in the Seomjin river maintenance basic plan. The prediction of bed changes was also completed with HEC-6 model. The study results were summarized as follows: The main factor of bed changes in the Seomjin river downstream can be decided by extreme extraction of bed aggregate rather than the change of hydrological data. According to the analysis of bed stability based on the relation between friction velocity and representative grain size, and the relation between dimensionless tractive force and representative grain size, the Seomjin river downstream appears to be increased overall. The bed composition material in the stream channel of the Seomjin river of 2003 year shows higher composition rate of gravel and lower composition rate of sand as compared to those of 1989 year. According to result that the prediction of bed changes, it is estimated that the bed will be risen approximately 1.5 m to the place up to 9 km from the estuary, have been repetitively risen and fallen up to 1 m to the place between $9{\sim}21\;km$ section, and fallen about 0.5m to the place between $22{\sim}25\;km$ section. As a result, the bed of the Seomjin river downstream can be decided to be risen gradually. However, since the prediction of this study is based on the assumption that there will be no forced aggregate picking, the bed changes can be much greater than expected when there is a massive aggregate picking as it had happened before.

• Journal of Wetlands Research
• /
• v.13 no.2
• /
• pp.329-341
• /
• 2011

This study was conducted with the national river, Munsancheon, which is located in Paju-si, Gyeonggi-do. The sediment discharge of Munsancheon was directly measured to analyze the sediment characteristics, and the results were used in the numerical model to predict the long-term river bed variation. The flow-total sediment discharge relation was derived using the measured total sediment discharge, and the results were compared with the total sediment discharge that was calculated using the existing prediction formula to derive a proper sediment discharge prediction method. In the actual measurements, the total annual sediment discharge was 5,478 ton/year, and the specific sediment discharge was 29.23 ton/$km^2$/year. The Ackers & White formula resulted in the values very close to the actual measurements. With the actual sediment discharge, geographical and hydrologic data as the input variables, HEC-6 and GSTARS models were comparatively analyzed. The test results showed that the HEC-6 model is suitable for the reliable prediction of the long-term river bed variation. Accordingly, the model was used for the long-term river bed variation prediction in this study. In the case of Munsancheon, deposition was continued in the downstream area and erosion occurred in the upstream area on the whole. It was expected that the stream would be stabilized in the river bed condition of 20 years later. The river bed variation was within 1 m, which was at the significance level. In the downstream area that is influenced by tide, however, the accumulation was continuously increasing within the section 2,000-7,000 m from the outlet. It seems that this should be considered in establishing the river management plans.

• Journal of Wetlands Research
• /
• v.19 no.2
• /
• pp.181-192
• /
• 2017

Analysis using a numerical model is important to understand the sediment transport mechanism associated with erosion and sedimentation near weirs and other hydraulic structures within riverine systems. The local riverbed change near a hydraulic structure (Gangjeong-Goryong multi-function weir in the Nakdong river) was analyzed in order to examine the effect of hydraulic structures on local bed change. A 2D numerical model (CCHE-2D) was employed to simulate the sedimentation and erosion over a reach (25 km) including the weir. For the calibration and verification of the model, rainfall data from a real event (Typoon 'Ewiniar' in 2006) were used for flow and stage simulation. And the simulated results show a good agreement with the observed data for the whole domain. From the result, it was found that the installation and operation of the weir could aggravate bed changes by typhoon between movable weirs, and which resulted in redistribution of sediment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1739-1744
• /
• 2010

The calculation method using the numerical model developed is currently one of the mose required method to predict sediment transport and bed changes in the rivers. Specially, it is real condition that is applying as it is a single sediment transport equation and sediment transport mode mostly without verification process with field data. The sensitivity analysis and calibration process considering the different sediment transport equations and sediment transport modes should be performed for the accurate bed change prediction of the specified study reach using the a model. Through its process, the optimum sediment transport equation and mode for the study reach should be defined. In this study, bed changes for the actual river are computed using the CCHE2D model allowed to select various sediment transport equations and modes. The bed change sensitivity analysis with different ranges of river flow discharge through its process, the optimum sediment transport equation and mode for the study reach should be defined. The bed change simulation with the actual hydraulic condition and the modeling results are compared with the field survey results.