• 제목/요약/키워드: Risk safety areas

검색결과 390건 처리시간 0.023초

건축구조물 붕괴위험도 정량화에 관한 연구( I ) (Quantification for Collapsion Probability of Building Structures( I ))

  • 손기상
    • 한국안전학회지
    • /
    • 제9권1호
    • /
    • pp.110-120
    • /
    • 1994
  • The Quantitative analysis for collapsion probability of each construcion work has not been developed, despite of that the one for safety management itself has been reported, up to now. It is concluded that showing critical check points against structure collapsion due to each work at construction site, and Quantifying those could be useful Quality-assuring tool, not to prevent Quality failure. Risk classes of each work at construction site, classified by German Builders Mutual-Aid Association (GEBMAS), and by special instruction rates of Korea Insurance Development Institute, are introduced to compare with the results of this study. As of a study method, total 2,002 sheets of questionwares are distributed directly to new city development areas, which are called, Ilsan 110 points : Pundang 79points and Chungdong 38points, including additional Changwon 125sheets and pusan 60sheets, by four(4) people, for contact with actual site engineers. Total responses of 1,056 sheets, are collected. Interrelationship diagram between experience years of Engrs., and risk rate of responses are also classified, with the criteria of four(4) years. Domestic journals with relation to construction have reported that main building Structure collapsions are mainly shown on apartment buildings and office ones. These two(2) building structures are again classified as five(5) kinds of works. This study takes use of an approach on haying the risk rates for each construction work on the above individual construction work. Additionally, site investigations have been performed to find out any possible unreasonable check items, due to construction method ; Reinforced Concret structure, Pre cast Concrete structure, and Steel structure building. Developed Quality Assurance Analysis Form with the Quantitative danger class, resulted from this study, are verified as it is able to be a good efficiency tool against collapsion of building structures.

  • PDF

PBL 반응공정의 정량적 위험성 평가에 관한 연구 - 결함수분석(FTA) 및 사고결과영향분석(CA)을 중심으로- (A Study on the Advancement of Quantitative Risk Assessment for the PBL Process - The Center of FTA and Consequence Analysis-)

  • 이영순;강순중;최봉선;김형석
    • 한국가스학회지
    • /
    • 제2권2호
    • /
    • pp.1-11
    • /
    • 1998
  • PBL(Poly Butadiene Latex) 반응공정을 연구대상으로 하여 사고 시나리오를 작성하고 시나리오별 정량적 위험성 평가 및 사고결과 영향평가를 실시하였다. 정략적 위험성 평가결과 PBL 반응기가 반응폭주로 인한 사고확률은 $9.197{\times}10^{-5}/yr$로 나타났고, 중요도가 가장 큰 것은 압력방출장치(Relief Device)이다. 사고영향평가 결과 반응기가 폭발이 일어날 때 기준점에서의 최대폭발과압(peak overpressure)은 $5.066{\times}10^5(Pa)$이고, 유리창이 파열될 수 있는 영향(피해) 범위는 거의 공장 전 지역을 포함한다. 폭풍의 직$\cdot$간접적인 원인에 의하여 근로자가 사망할 수 있는 최대 영향반경은 27m이고, 고막의 손상을 일으키기 위한 최대 영향반경은 77m로 나타났다. PBL 반응기가 폭발했을 때 건축물과 같은 구조물이 받을 수 있는 손상 정도는 폭심으로부터 52m까지로 나타났다. 이들 평가 결과를 기준으로 효과적인 안전시설 투자에 대한 시설개선 방향을 제시하였다.

  • PDF

Concentration of heavy metals in shellfishes and health risk assessment from Korean coastal areas

  • Ka Jeong Lee;Eun Hye Kang;Minchul Yoon;Mi Ra Jo;Hong Sik Yu;Kwang Tae Son
    • Fisheries and Aquatic Sciences
    • /
    • 제25권12호
    • /
    • pp.626-636
    • /
    • 2022
  • Shellfish are exoskeleton-bearing aquatic invertebrates that consume various organic and inorganic substances floating in seawater through filter feeding. Heavy metals are known as absorbed and accumulated in seawater. Some of the toxic heavy metals are highly accumulated in seawater, and exposure to them can cause a variety of risks to the human body. Since Koreans like to eat seafood, they are more likely to be exposed to contaminated seafood with heavy metals. In this study, nine types of heavy metals were analyzed on ten different shellfish species in the coastal area of South Korea. The risk assessment was also done on shellfish in which heavy metals were detected. Zinc (Zn) and copper (Cu) were identified at an average of 56.7 mg/kg (6.70 to 466 mg/kg) and 13.2 mg/kg (0.064 to 143 mg/kg), respectively. Lead (Pb) average of 0.208 mg/kg (0.000750 to 1.02 mg/kg), cadmium (Cd) average of 0.454 mg/kg (0.0388 to 1.56 mg/kg) and mercury (Hg) average of 0.0266 mg/kg (0.00548 to 0.174 mg/kg) were identified. Additionally, arsenic (As), chromium (Cr), nickel (Ni), and silver (Ag) were also identified as average concentrations of 4.02 (0.460 to 15.0 mg/kg), 0.167 (< limit of quantification [LOQ] to 0.820 mg/kg), 0.281 (< LOQ to 1.46 mg/kg), and 0.158 mg/kg (< LOQ to 1.15 mg/kg). The result indicates that the monitoring results of heavy metals in most shellfish satisfied the Korean standard. However, Pb and Cd have exceeded some foreign standards, such as the United States and the EU. The permissible human exposure calculated using the heavy metal intake and detection amount was lower than the Joint FAO/WHO Expert Committee on Food Additives human safety standard, and the risk of heavy metals from shellfish consumption was at an acceptable level.

국내 CM기업의 리스크 인자별 관리 업무 프로세스 분석을 통한 표준업무체계 개발 (Development of Standard Systems through Analysis of Business Process the Risk Factors for the Korean Construction Management Firms)

  • 박경모;김창덕
    • 한국건설관리학회논문집
    • /
    • 제16권6호
    • /
    • pp.73-83
    • /
    • 2015
  • 건설산업의 변화에 따라 대부분의 국내 CM기업들은 공정 원가 품질 안전관리를 중점관리 대상으로 선정하여 관리하고 있으며 리스크 관리를 위한 전담조직 설치 및 임직원 교육, 시스템개발에 대한 투자는 미흡한 실정이다. 이처럼 국내 CM기업들이 리스크 관리 분야에 대한 투자가 부족한 이유는 체계적인 방법론이나 논리에 의해서 리스크를 분석하기 보다는 직관과 경험에 근거하여 판단하는 것이 더 쉽고, 체계적인 리스크 관리를 위한 표준업무체계 개발에 대한 중요성을 인식하지 못하기 때문이다. 따라서 본 연구는 CM기업 본사에서 현장 운영관리 시 발생되는 리스크 인자 도출 및 업무 프로세스를 분석하여 문제점을 분석하고, 리스크 인자별 효율적인 관리를 위한 표준업무체계를 제시하였다. 또한 전문가들의 면담을 통해 효율성을 검증하여 향후 리스크 인자별 표준 대응 절차서 활용과 리스크 관리 시스템 개발을 위한 기초 자료로 활용될 수 있을 것으로 기대한다.

Trend of Occupational Injuries/Diseases in Pakistan: Index Value Analysis of Injured Employed Persons from 2001-02 to 2012-13

  • Abbas, Mohsin
    • Safety and Health at Work
    • /
    • 제6권3호
    • /
    • pp.218-226
    • /
    • 2015
  • Background: The present study aimed to analyze the index value trends of injured employed persons (IEPs) covered in Pakistan Labour Force Surveys from 2001-02 to 2012-13. Methods: The index value method based on reference years and reference groups was used to analyze the IEP trends in terms of different criteria such as gender, area, employment status, industry types, occupational groups, types of injury, injured body parts, and treatment received. The Pearson correlation coefficient analysis was also performed to investigate the inter-relationship of different occupational variables. Results: The values of IEP increased at the end of the studied year in industry divisions such as agriculture, forestry, hunting, and fishing, followed by in manufacturing and construction industry divisions. People associated with major occupations (such as skilled agricultural and fishery workers) and elementary (unskilled) occupations were found to be at an increasing risk of occupational injuries/diseases with an increasing IEP trend. Types of occupational injuries such as sprain or strain, superficial injury, and dislocation increased during the studied years. Major injured parts of body such as upper limb and lower limb found with increasing trend. Types of treatment received, including hospitalization and no treatment, were found to decrease. Increased IEP can be justified due to inadequate health care facilities, especially in rural areas by increased IEP in terms of gender, areas, received treatment, occupational groups and employment status as results found after Pearson correlation coefficient analysis. Conclusion: The increasing trend in the IEP% of the total employed persons due to agrarian activities shows that there is a need to improve health care setups in rural areas of Pakistan.

대형 싱크홀 재난 현장 조사용 3차원 형상화 장비 구현 (Fabrication of Three-Dimensional Scanning System for Inspection of Massive Sinkhole Disaster Sites)

  • 김수로;윤호근;김상욱
    • 로봇학회논문지
    • /
    • 제15권4호
    • /
    • pp.341-349
    • /
    • 2020
  • Recently, interest in ground subsidence in urban areas has increased after a large sinkhole occurred near the high-story building area in Jamsil, Seoul, Korea, in 2014. If a massive sinkhole occurs in an urban area, it is crucial to assess its risk rapidly. Access to humans for on-site safety diagnosis may be difficult because of the additional risk of collapse in the disaster area. Generally, inspection using drones equipped with high-speed lidar sensors can be utilized. However, if the sinkhole is created vertically to a depth of 100 m, similar to the sinkhole in Guatemala, the drone cannot be applied because of the wireless communication limit and turbulence inside the sinkhole. In this study, a three-dimensional (3D) scanning system was fabricated and operated using a towed cable in a massive vertical sinkhole to a depth of 200 m. A high-speed lidar sensor was used to obtain a continuous cross-sectional shape at a certain depth. An inertial-measuring unit was applied to compensate for the error owing to the rotation and pendulum movement of the measuring unit. A reconstruction algorithm, including the compensation scheme, was developed. In a vertical hole with a depth of 180 m in the mining area, the fabricated system was applied to scan 0-165 m depth. The reconstructed shape was depicted in a 3D graph.

MCDM 기법을 이용한 도심지 토사재해 예방을 위한 도시계획적 대책 위치 결정방법 제안 (Determining the Location of Urban Planning Measures for Preventing Debris-Flow Risks: Based on the MCDM Method)

  • 문용희;이상은;김소윤;김명수
    • 한국안전학회지
    • /
    • 제32권5호
    • /
    • pp.103-114
    • /
    • 2017
  • The landslide disaster damage has been increased by mountain development, leading to construction of educational facilities, medical facilities, petty industrial facilities, and large housing complexes. Therefore, effective regulation is required as an effort in urban planning solutions. For suggesting specific mitigation strategies on urban landslide, this study aims to define evaluation criteria for urban planning management of debris-flow disaster. AHP (Analytic Hierarchy Process), one of the multiple criterion decision making methods, was utilized in this study. This study makes use of 16 sub-criteria under the framework of hazard, exposure, and vulnerability, and well-planned expert survey measures their weights. The weights are also applied to evaluate each grid in urban space (min $10{\times}10m$) and classify it with red, orange, yellow, or green grade so that areas at higher risk are clearly identified. This study concludes that the suggested method is useful to support a strategies for urban planning management of debris-flow disaster, particularly in a GIS base.

A Study on FSA Application for Human Errors of Dynamic Positioning Vessels Incidents

  • Chae, Chong-Ju
    • 한국항해항만학회지
    • /
    • 제41권5호
    • /
    • pp.259-268
    • /
    • 2017
  • Formal Safety Assessment (FSA) has been mostly implemented on the hardware aspects of vessels. Although there are guidelines regarding human error FSAs, there have not been many assessments in such areas. To this end, this study seeks to use precedent studies for the safe operation of DP vessels, conducting an FSA regarding human error of DP LOP (Loss of Position) incidents. For this, the study referred to precedent studies for the frequency of DP LOP incidents caused by human errors, adding the severity of LOP incidents, and then applying them to the Bayesian network. As a result, the study was able to confirm that among DP LOP incidents caused by human errors, the drive-off from skill-based errors was 74.3% and the drive-off from unsafe supervision was 50.5%. Based on such results, RCOs (Risk Control Options) were devised through a brainstorming session with experts coming up with proposals including providing mandatory DPO training, installing DP simulator on the vessels, drawing up measures to understanding the procedures for safe operation of DP vessels. Moreover, it was found that mandatory DPO training is reasonable in terms of cost benefits and that while installing a DP simulator is not suitable in terms of cost benefits, it can significantly reduce risks when operating DP vessels.

시멘트 액체방수 뿜칠장비의 개발 (Development of Cement Liquid Waterproofing Spouting Equipment)

  • 김한식;하정수;이영도
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2022년도 가을 학술논문 발표대회
    • /
    • pp.145-146
    • /
    • 2022
  • The demand for a construction method capable of securing a safety environment and improving quality is increasing. There is a high risk of falling when working at a high place in an environment where it is difficult to secure visibility, such as an underground space, and there is a risk of falling if cement liquid waterproof materials are transferred to the top of the scaffold by manpower. In addition, when working on a high place in a poor environment, the quality uniformity of the upper part of the wall is deteriorated. In addition, as waterproof technicians gradually age and decrease, it is difficult to secure them, so it is urgent to prepare countermeasures against the shortage of waterproof technicians. Therefore, the purpose of this study is to develop cement liquid waterproof spouting construction equipment that can secure uniform quality of construction areas to prevent accidents and ensure safety of workers, improve work efficiency and quality due to improvement of work environment. The adhesion performance of the cement liquid waterproof material could be improved by about 20% in accordance with the use of the equipment.

  • PDF

교통안전특정해역에서의 항법 적용에 대한 VTSO의 인식도 : 광양만 출입항로를 중심으로 (VTSO recognition of the navigation rule application to the traffic safety designated area)

  • 박정록;김재수;김재일
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2015년도 춘계학술대회
    • /
    • pp.302-304
    • /
    • 2015
  • 교통안전특정해역은 선박사고의 위험성이 특히 높아 정부가 채택한 연안해역을 의미하나 정작 이 곳에서 적용되는 항법에 대하여는 여전히 논란이 있는 게 사실이며 여수VTS 관제구역에 있는 광양만 출입항로에 있어서는 그 적용이 더 난해한 부분이 있다. 따라서 본 연구에 대한 대책으로서 적극적 관제를 위한 교통안전특정해역에서의 항법적용에 대한 통일된 해석과 적용 방침을 마련하고, 나아가서 해사안전법에서의 특별항법 부분을 별도로 분리 입법하는 방법으로 선박교통안전을 향상하고, 선박교통관제사가 적극적인 업무자세로 집중관제의 토대를 마련하는데 조금이나마 기여하고자 한다.

  • PDF