• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.3
• /
• pp.218-228
• /
• 2010

Components of dental resin-based restorative materials are reported to leach from the filling materials even after polymerization. Hydroquinone (HQ) is one of the major monomers used in the dental resin and is known as a carcinogen. Thus, carcinogenic risk of HQ leaching from the dental resin becomes a public health concern. The present study attempted to examine the carcinogenic potentials of HQ on the human epithelial cell, which is the target cell origin of the most of oral cancers. Cytotoxicity of HQ was observed above 50${\mu}M$ as measured by LDH assay, indicating a relatively low toxicity of this substance in human epithelial cells. The parameters of neoplastic cellular transformation such as cell saturation density, soft agar colony formation and cell aggregation were analyzed to examine the carcinogenic potential of HQ. The study showed that 2-week exposure of HQ showed the tendency of increase in the saturation density and the significant enhancement of soft agar colony formation at the highest dose, 50 ${\mu}M$ only. It is suggested that HQ has a weak potential of carcinogenicity. When cells were treated with HQ and TPA, a well-known tumor promoter, the parameters of neoplastic cellular transformation was significantly increased. This result indicates that the potential risk of carcinogenicity from HQ is largely dependent upon the presence of promoter. Exposure of 50 ${\mu}M$ HQ increased the time-dependent apoptosis as measured by the ELISA kit. This concentration coincides with a dose of neoplastic transformation, indicating a possible link between apoptosis and HQ-induced cellular transformation. Hydroquinone generated Reactive Oxygen Species (ROS) which was evidenced by the treatment of antioxidants such as trolox and N-acetyl cysteine and the GSH depleting agent, BSO. Antioxidants blocked the generation of ROS and the GSH depleting agent, BSO dramatically increased the ROS production. Since HQ is known to increase ROS production thru activation of transcriptional factor such as c-Myb and Pim-1, it is speculated that ROS generation by HQ plays a role in the activation of oncogene, which may lead to neoplastic transformation. In addition, ROS is involved in the alteration of signal transduction, which regulates the apoptosis in many cellular systems. Thus, ROS-mediated apoptosis may be involved in the HQ-induced carcinogenic processes. Protein kinase C (PKC) is known to play pivotal roles in neoplastic transformation of cells and its high expression is often found in a variety of types of tumors including oral cancer. PKC translocation of PKC-${\alpha}$ was observed following HQ exposure. Altered signaling system may also play a role in the transformation process. Taken together, HQ leached from the dental resin does not pose a significant threat as a cancer causing agent, but its carcinogenic potential can be significantly elevated in the presence of promoter. The mechanism of HQ-induced carcinogenesis involved ROS generation, apoptosis and altered signaling pathway. The present study will provide a valuable data to estimate the potential risk of HQ as a carcinogen and understand mechanism of HQ-induced carcinogenesis in human epithelial cells.

• Journal of Environmental Policy
• /
• v.4 no.1
• /
• pp.39-67
• /
• 2005

In order to properly define the terms such as soil, soil contamination, soil contamination site and remediation, which are the key terms under the Soil Environment Conservation Act(SECA) in Korea, we analyzed the legal definitions of the similar key words in legislations of the developed western countries. The selected countries were the United States of America, the United Kingdom, the Netherlands, Germany, and Denmark. The legal definitions of these keywords were very much diversified due to different levels of soil contamination, as well as different industrial, social, and legal backgrounds in each country. However, fair suggestions for definitions of the key terms in SECA were derived from the comparative analyses of these countries. First and foremost, SECA should provide a definition of 'soil' which includes a concept of the natural soil layer produced from soil mineralization processes. Groundwater and sublayer of the groundwater would. be excluded in the boundary of the soil with regards to the Groundwater Act of Korea. Definition of 'soil contamination' of SECA should include a concept of risk assessment(soil contaminants, pathway, and receptors), purpose of land use, and the acquired limitation levels of soil contaminants. Soil contamination activity either industrial or anthropogenic in SECA article2-1, could be substituted for a concept of soil risk assessment. Definition of 'soil contamination site' could derive from amalgamating the concepts of i) soil contamination in conjunction with contaminants, ii) risk assessment, iii) a concept of land use, and iv) knowing limitation of contamination site designation. Definition of 'remediation of contaminated site' should include the objective, intention, action, methodology and limit of the remediation. These suggested definitions would increase the efficacy of soil environment conservation policies, which includes the survey of the potentially contaminated area, remediation, and removal of the site.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.2
• /
• pp.52-68
• /
• 2009

The purpose of this study is to establish the management area using assessment of the conservation value on forest wetland, Sandeul wetland in Mt. Jaeyak, Miryang-si, Gyeongsangnam-do, Korea. The six assessment factors were selected through the review of previous researches and written evidences such as wetland vegetation, hydrological factor, soil factor, topographical factor, naturalness and risk. The assessment data were built on the basis of digital topographic maps, digital detailed soil maps, high resolution satellite images and field surveys of three times. According to the result of assessment of the conservation value and establishment the management area, the core area which has the highest conservation value was occupied by 1.9ha and the conservation area which conservation value is 2 grades was occupied by 33.7ha. The buffer area surrounded core area and conservation area was analyzed by 33.7ha. The transition area which conservation value is 4 grades showed by the widest area(151.2ha) and restoration area that is the ecological hazard area was occupied by 1.7ha. In conclusion, these results can provide methods and basic informations for conserving and managing wetlands because the management area was classified scientifically considering rational processes.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.3
• /
• pp.92-100
• /
• 2015

Unlike most other planning processes, brownfield planning generally requires a high level of technical and legal expertise due to potential site contamination. To successfully engage in inclusionary decision making, an adaptive collaboration strategy for brownfield planning is therefore critical. This study examines how a communicative planning approach can be used to overcome the challenge of enabling experts from different fields to work alongside lay people from the local community to achieve a properly balanced collaboration in brownfield planning. After identifying appropriate indicators for collaboration through a literature review of established communicative planning theory, these indicators are applied to the brownfield planning process, highlighting critical points of collaboration such as site prioritization, assessment, remediation, and redevelopment throughout. The results suggest the critical need for an adaptive model focusing on three aspects: 1. Facilitation of a balanced dialogue between the experts with social, cultural, and design-based knowledge and the ones with scientific and engineering-based knowledge, 2. Preparation of an appropriate tool for risk communication with the lay people, 3. Development of decision support system for the integration of expert-oriented technical data and public opinion-oriented subjective data.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.58.1-58.1
• /
• 2010

In solar cell module manufacturing, single solar cells has to be joined electrically to strings. Copper stripes coated with tin-silver-copper alloy are joined on screen printed silver of solar cells which is called busbar. The bus bar collects the electrons generated in solar cell and it is connected to the next cell in the conventional module manufacturing by a metal stringer using conventional hot air or infrared lamp soldering systems. For thin solar cells, both soldering methods have disadvantages, which heats up the whole cell to high temperatures. Because of the different thermal expansion coefficient, mechanical stresses are induced in the solar cell. Recently, the trend of solar cell is toward thinner thickness below 180um and thus the risk of breakage of solar cells is increasing. This has led to the demand for new joining processes with high productivity and reduced error rates. In our project, we have developed a new method to solder solar cells with a laser heating source. The soldering process using diode laser with wavelength of 980nm was examined. The diode laser used has a maximum power of 60W and a scanner system is used to solder dimension of 6" solar cell and the beam travel speed is optimized. For clamping copper stripe to solar cell, zirconia(ZrO)coated iron pin-spring system is used to clamp both joining parts during a scanner system is traveled. The hot plate temperature that solar cell is positioned during lasersoldering process is optimized. Also, conventional solder joints after $180^{\circ}C$ peel tests are compared to the laser soldering methods. Microstructures in welded zone shows that the diffusion zone between solar cell and metal stripes is better formed than inIR soldering method. It is analyzed that the laser solder joints show no damages to the silicon wafer and no cracks beneath the contact. Peel strength between 4N and 5N are measured, with much shorter joining time than IR solder joints and it is shown that the use of laser soldering reduced the degree of bending of solar cell much less than IR soldering.

• Korean Chemical Engineering Research
• /
• v.51 no.2
• /
• pp.221-225
• /
• 2013

Sustainability, in general, means the protection of environmental resources and economic prosperity, with the consideration of the social, economic and environmental effect, as well as human health and the enhancement of life. Profound consideration about sustainability has to handle the overall cycle of feedstock, resource extraction, transportation and production in addition to the environmental effect. Sustainable development of the chemical industries should be carried out complementarily by strengthening the chemical process safety of the industries. In this respect, chemical process safety can be called an opportunity to enhance the compatibility internationally. Changing new paradigm in chemical process safety is formed from the overall life cycle considering basic design of existing systems and production processes. To improve the chemical process safety, the integrated smart system is necessary, comprising various chemical safety database and knowledge base and improved methods of quantitative risk analysis, including management system. This paper discussed the necessity of overall life cycle in chemical process safety and proposed new technology to improve the sustainability. To develop the sustainable industries in process systems engineering, three S, which include Safety, Stability and Security, will have to be combined appropriate.

• Clean Technology
• /
• v.26 no.3
• /
• pp.161-167
• /
• 2020

For the design of the prevention and mitigation measures in process industries involving flammable substances, reliable safety data are required. An important property used to estimate the risk of fire and explosion for a flammable liquid is the flash point. Flammability is an important factor to consider when developing safe methods for storing and handling solids and liquids. In this study, the flash point data were measured for the binary systems {2-butanol + 2,2,4-trimethylpentane}, {2-butanol + methylcyclohexane} and {2-butanol + toluene} at 101.3 kPa. Experiments were performed according to the standard test method (ASTM D 3278) using a Stanhope-Seta closed cup flash point tester. A minimum flash point behavior was observed in the binary systems as in the many cases for the hydrocarbon and alcohol mixture that were observed. The measured flash points were compared with the predicted values calculated via the following activity coefficient (GE) models: Wilson, Non-Random Two-Liquid (NRTL), and UNIversal QUAsiChemical (UNIQUAC) models. The predicted data were only adequate for the data determined by the closed-cup test method and may not be appropriate for the data obtained from the open-cup test method because of its deviation from the vapor liquid equilibrium. The predicted results of this work can be used to design safe petrochemical processes, such as the identification of safe storage conditions for non-ideal solutions containing flammable components.

• Journal of the Economic Geographical Society of Korea
• /
• v.19 no.4
• /
• pp.597-615
• /
• 2016

Since 1997 the United Kingdom has pursued creative industry and creative city development in accordance with the New Labor Party policy, strengthening its cluster policy by assigning creative city policies to traditional manufacturing-oriented regions. Tech City in London, one of the most successful examples of digital clusters, is an area in which diverse ecosystems for venture business integration have been established, as the once barren space began to spontaneously develop. For this region, systematic linkages including universities, private companies, start-ups, and accelerators have been added, along with the UK government's active support system. As a result of this opportunity, the scale of the UK start-up ecosystem has significantly grown, the number of local companies has surged, and brand effect has greatly improved. Tech City is an example of a well-balanced combination of public effort and private governance, based on the region's historical background and its potential for growth. It is an effective coordination of public policy and private active investment, services, research, and education. The market platform for institutional technology and commercialization, and aggressive investment shares in the risk, have lead to its growth as a start-up and an innovative city. Britain's efforts to expand the nationwide cluster for the future-oriented digital economy is most noteworthy.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1061-1061
• /
• 2001

The scope of precision agriculture is to reach the put up cultivation goals by adjusting inputs as precise as possible after what is required by the soil and crop potentials, on a high spatial resolution. Consequently, precision agriculture is also often called site specific agriculture. Regulation of field inputs “on the run” has been made possible by the GPS (Geographical Position System)-technology, which gives the farmer his exact real time positioning in the field. The general goal with precision agriculture is to apply inputs where they best fill their purpose. Thus, resources could be saved, and nutrient losses as well as the impact on the environment could be minimized without lowering total yields or putting product quality at risk. As already indicated the technology exists to regulate the input based on beforehand decisions. However, the real challenge is to provide a reliable basis for decision-making. To support high spatial resolution, extensive sampling and analysis is required for many soil and plant characteristics. The potential of the NIR-technology to provide rapid, low cost analyses with a minimum of sample preparation for a multitude of characteristics therefore constitutes a far to irresistible opportunity to be un-scrutinized. In our work we have concentrated on soil-analysis. The instrument we have used is a Bran Lubbe InfraAlyzer 500 (1300-2500 nm). Clay- and organic matter-contents are soil constituents with major implications for most properties and processes in the soil system. For these constituents we had a 3000-sample material provided. High performance models for the agricultural areas in Sweden have been constructed for clay-content, but a rather large reference material is required, probably due to the large variability of Swedish soils. By subdividing Sweden into six areas the total performance was improved. Unfortunately organic matter was not as easy to get at. Reliable models for larger areas could not be constructed. However, through keeping the mineral fraction of the soil at minimal variation good performance could be achieved locally. The influence of a highly variable mineral fraction is probably one of the reasons for the contradictory results found in the literature regarding organic matter content. Tentative studies have also been performed to elucidate the potential performance in contexts with direct operational implications: lime requirement and prediction of plant uptake of soil nitrogen. In both cases there is no definite reference method, but there are numerous indirect, or indicator, methods suggested. In our study, field experiments where used as references and NIR was compared with methods normally used in Sweden. The NIR-models performed equally or slightly better as the standard methods in both situations. However, whether this is good enough is open for evaluation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.145-154
• /
• 2017

Technology innovation is regarded as the quintessential process to acquire a competitive advantage. This is especially true in high-tech industries, and firms that recognize the importance of technological innovation concentrate their capacities on developing new technologies, new products, and new processes. In general, such research requires many resources, but not all technological breakthroughs are followed by positive feedbacks. Consequently, the firms in high-tech industries are compelled to find new directions in acquiring technologies. This study examines the factors that influence technological innovation and empirically tests the effect these factors have on its diffusion. Radicality, discontinuity, and exploitation/exploration were selected as the factors from the previous literature on technological innovation and organizational learning. For the empirical test, patent data from the US semiconductor industry were used to describe innovation activities from various fields. From the result, these three factors (Ed- is this what you mean, i.e., radicality, discontinuity, and exploitation/exploration?)were found to have significant meaning as proxies for the diffusion of technological innovation.