• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.286-290
• /
• 2001

This paper describes an improved short-circuit protection method with a boost type rectifier using a multilevel ac/dc power converter. The output dc power of the proposed converter can be disconnected from the load within several hundred microseconds at the instant of short-circuit fault. Once the fault has been cleared the dc power is reapplied to the load. The rising time of the dc load voltage is as small as several hundred microseconds, and there is no overshoot of the dc voltage because the dc output capacitors hold undischarged state. The converter, which employs the proposed method, has the characteristics of a simplified structure, reduced cost, weight, and volume compared with a conventional power supply, which has frequent output short-circuits. Experimental results are presented to verify the usefulness of the proposed converter.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.2105-2108
• /
• 2003

The characteristics of upward bubble flow were experimentally investigated in a liquid bath. In the present study, a thermal-infrared camera and high speed CCO camera were used to measure their temperature and local rising velocity, respectively. Heat transfer from bubble surface to water is largely completed within z=10mm from the nozzle, and then the temperature of bubble surface reaches that of water rapidly. The rising velocity of bubble was calculated for two different experimental conditions: 1) bubble flow without kinetic energy 2) with kinetic energy. Bubble flow without kinetic energy starts to undergo the effect of inertia force 10cm away from the nozzle. Whereas, kinetic energy is dominant before 30 cm away from the nozzle in bubble flow, but after this point, kinetic energy and inertial force are applied on bubble flow at the same time.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.6-8
• /
• 2001

This paper covers general recommendations for top-oil temperature rising of mineral-oil-immersed power distribution transformer rated 100kVA and less, manufactured in Korea. In order to analyze the top-oil temperature rising due to the distribution transformer loading we performed experiments for oil-immersed distribution transformer, manufactured in domestic at KERI(Korea Electrical Research Institute) from December 2000 to May 2001. The magnitude of loading were changed, and the top-oil temperatures for each time were measured. Finally, we present the overload criteria of distribution transformer for summer and winter season in domestic. respectively.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1755-1757
• /
• 1998

Pulse transformers have been developed to apply for pulsed power technology as an alternative of a Marx generator. To obtain repetitive pulsed power generation, it is necessary to observe the rising time of output of pulse transformer. In this paper, using the equivalent circuit, The rising wave of output of pulse transformer is simulated for various input wave by using the Electromagnetic transient program(EMTP).

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.05a
• /
• pp.203-206
• /
• 2005

Recently, it is not to much to say that the world of hospital architecture in Korea is in a time of transition that undergo big changes. Each hospital pursues their transformation not only for patiences' changing demands on medical services but to cope with rapid environmental changes that pouring like boundless competition, opening tendency and to get an advantage of competition to attract patiences with other hospitals. It is because national expectations and standards on medical services have risen and they are not satisfied with hospitals that run for doctors and medical care that served technically any more. With rising interests in health, it is emphasized not the functions of hospitals to prevent diseases but the purpose of treatment and securing other facilities according to rising economical incomes except medical facilities.

• Korean journal of food and cookery science
• /
• v.21 no.2 s.86
• /
• pp.125-138
• /
• 2005

The purposes of this study were to determine what kinds of food university students had, how often they were eating out and how much they consumed. A questionnaire survey was conducted on 597 university students (male $40.9\%$, female : $51.9\%$). The students who spent under 200 thousand won per month had regular meals at breakfast, lunch and dinner. The students with personal monthly spending over 300 thousand won, both male and female, ate out more than others. The female students had more protein foods than the male students. Consumption of milk and milk products increased with rising monthly spending for female students. Regardless of monthly spending, the male students ate seaweeds low in 1-2 time per a week. Consumption of rice decreased with rising monthly spending for male and female students.

• Structural Engineering and Mechanics
• /
• v.81 no.6
• /
• pp.705-714
• /
• 2022

The aim of this paper is to investigate nonlinear dynamic responses of functionally graded composite beam resting on the nonlinear viscoelastic foundation subjected to moving mass with temperature rising. The non-linear strain-displacement relationship is considered in the finite strain theory and the governing nonlinear dynamic equation is obtained by using the Hamilton's principle. The Galerkin's decomposition technique is utilized to discretize the governing nonlinear partial differential equation to nonlinear ordinary differential equation and then the governing equation is solved by using of multiple time scale method. The influences of temperature rising, material distribution parameter, nonlinear viscoelastic foundation parameters, magnitude and velocity of the moving mass on the nonlinear dynamic responses are investigated. Also, the buckling temperatures of the functionally graded beams based on the finite strain theory are obtained.

• Steel and Composite Structures
• /
• v.42 no.5
• /
• pp.649-655
• /
• 2022

In presented paper, moving load problem of simply supported axially functionally graded (AFG) beam is investigated under temperature rising based on the first shear beam theory. The material properties of beam vary along the axial direction. Material properties of the beam are considered as temperature-dependent. The governing equations of problem are derived by using the Lagrange procedure. In the solution of the problem the Ritz method is used and algebraic polynomials are used with the trivial functions for the Ritz method. In the solution of the moving load problem, the Newmark average acceleration method is used in the time history. In the numerical examples, the effects of material graduation, temperature rising and velocity of moving load on the dynamic responses ofAFG beam are presented and discussed.

• Journal of Korean Academy of Nursing
• /
• v.38 no.1
• /
• pp.11-18
• /
• 2008

Purpose: This study was to determine whether the Sun-style 24 forms of Tai Chi exercise improve pain, stiffness, disability, knee joint motion, mobility, balance or falling. Method: Forty-six community-dwelling elderly subjects (mean age, $75.46{\pm}6.28$) voluntarily participated in an intervention group of either 24 forms of Sun-style T ai Chi for 60 min, 2 times per week for 12 weeks or a control group. A non-equivalent pretest-posttest design was used. Independent t-test and ANCOVA were used to examine group differences by using SPSS12.0. Result: The experimental group had significantly less pain (F=7.60, p=.008) and stiffness (t=-3.19, p=.003) than the control group. Also there were significant improvements in knee joint motion on the right knee (t=2.44, p=.019), left knee (t=2.30, p=.026), rising time (F=8.03, p=.07), balance on the left single leg test (t=2.20, p=.033), and fear of falling (t=-2.33, p=.024) in the Tai Chi exercise group. No significant group differences were found in disability and falls efficacy. Conclusion: The Sun-style 24 forms Tai Chi exercise is effective in decreasing pain, stiffness, fear of falling and it improves balance, rising time, and knee joint motion. We suggest a continuing long term intervention to decrease disability and increase efficacy concerning falls.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.2 no.2
• /
• pp.95-99
• /
• 2002

The Loose Part Monitoring System(LPMS) has been designed to detect. locate and evaluate detached or loosened parts and foreign objects in the reactor coolant system. In this paper, at first, we presents an application of the back propagation neural network. At the preprocessing step, the moving window average filter is adopted to reject the reject the low frequency background noise components. And then, extracting the acoustic signature such as Starting point of impact signal. Rising time. Half period. and Global time, they are used as the inputs to neural network . Secondly, we applied the neural network algorithm to LPMS in order to estimate the mass of loose parts. We trained the impact test data of YGN3 using the backpropagation method. The input parameter for training is Rising clime. Half Period amplitude. The result shored that the neural network would be applied to LPMS. Also, applying the neural network to thin practical false alarm data during startup and impact test signal at nuclear power plant, the false alarms are reduced effectively.