• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.4
• /
• pp.351-358
• /
• 2003

This paper describes distribution characteristics of switching surge voltage in stator windings of induction motor driven by IGBT PWM inverter. To analyze the voltage distribution between the turns and coils of stator winding, equivalent circuit model of induction motor including cable was proposed and high frequency parameter is computed by using finite-element method (FEM). From the electro-magnetic transient program (EMTP) simulation of the whole system for induction motor, feeder cable, and PWM inverter, the variable effect on rising time of the inverter, cable length, and switching frequency on the voltage distribution is also presented. In order to experiment, an induction motor, 380[V], 50[HP], with taps from one phase are built to consider the voltage distribution so that these results can be helpful when filter was designed to remove high dv/dt.

• Journal of Adhesion and Interface
• /
• v.6 no.2
• /
• pp.6-12
• /
• 2005

The plasma generally, ionized gas state, is the 4th material state composed the universe. Generating the plasma artificially has been studied by spending energy and it has a lot of applications in human's life. There are several merits to modify the surface of polymer using plasma. Above all, plasma maintains the property of polymer because of it changes the property of surface only. Also, it doesn't use a organic solvent and it is the environment friendship because of there are no waste under processing. Furthemore, in case of high-pressure plasma, it is possible that automated-processing continuously. In this study, we tried the reforming of surface to rise the adhesive strength between the material of polymer, experimented the rising of adhesive strength through a experiment of peel strength by virtue of processing time and using gas, confirmed the change of polymer's surface through measuring the surface contact angle analyzer and scanning electron microscopy (SEM).

• Computers and Concrete
• /
• v.8 no.3
• /
• pp.293-309
• /
• 2011

A long-term structural health monitoring (SHM) system comprising over 700 sensors of sixteen types has been implemented on the Guangzhou Television and Sightseeing Tower (GTST) of 610 m high for real-time monitoring of the structure at both construction and service stages. As part of this sophisticated SHM system, 48 temperature sensors have been deployed at 12 cross-sections of the reinforced concrete inner structure of the GTST to provide on-line monitoring via a wireless data transmission system. In this paper, the differential temperature profiles in the reinforced concrete inner structure of the GTST, which are mainly caused by solar radiation, are recognized from the monitoring data with the purpose of understanding the temperature-induced structural internal forces and deformations. After a careful examination of the pre-classified temperature measurement data obtained under sunny days and non-sunny days, common characteristic of the daily temperature variation is observed from the data acquired in sunny days. Making use of 60-day temperature measurement data obtained in sunny days, statistical patterns of the daily rising temperature and daily descending temperature are synthesized, and temperature distribution models of the reinforced concrete inner structure of the GTST are formulated using linear regression analysis. The developed monitoring-based temperature distribution models will serve as a reliable input for numerical prediction of the temperature-induced deformations and provide a robust basis to facilitate the design and construction of similar structures in consideration of thermal effects.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1476-1479
• /
• 1996

The ring rolling process is one of the best known ring production method. The present model based control system was designed for rings with rectangle cross-section yet. An Adaptive Fuzzy Control for Closed-Die Ring-Rolling was developed in order to enhance the flexibility of the radial-axial ring rolling machine and to produce the rings with highly complex cross-section profile, roller bearing rings. A fuzzy method was implemented because of its simple application and to utilize the known process knowledge. The quality of the control system was estimated by die filling grad, which is strong dependent on the rising time of the controller. The rolling process parameters were also varied to determine their influence on filling of the ring profile. Die filling met the requirement of the industry.

• International Journal of Oral Biology
• /
• v.42 no.3
• /
• pp.107-115
• /
• 2017

Human malignant melanoma is an aggressive skin cancer which has been rising at a greater rate than any other cancers. Although various new therapeutic methods have been developed in previous studies, this disease has properties of high proliferation and metastasis rate which remain obstacles that have lead to a poor prognosis in patients. It has been reported that a specific Lactobacillus extract has anti-cancer and -metastasis effect in vitro and in vivo. However, previous research has not specified precisely what effect the Lactobacillus rhamnosus GG (LGG) extract has had on human malignant melanomas. In this study, we showed that the LGG extract has anti-cancer and -metastasis effects on the human malignant melanoma cell lines, A375P and A375SM. At first, it was found that, while the LGG extract affects human neonatal dermal fibroblasts slightly, it induced the dose-dependent anti-cancer effect on A375P and A375SM by a WST-1 proliferation assay. As a result of a real-time PCR analysis, the expression patterns of several genes related to cell cycle, proliferation, and apoptosis were modulating in a manner that inhibited the growth of both malignant melanoma cell lines after the treatment of the LGG extract. Furthermore, genes related to the epithelial-mesenchymal transition were down-regulated, and migration rates were also decreased significantly by the LGG extract. Our study showed that the LGG extract could be used as a potential therapeutic source.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.3
• /
• pp.105-111
• /
• 2020

We defined Jeju Wind Castle and analyzed the relationship between Hallasan-Oreum-Batdam, the main subject, for the first time. In Jeju, 1.5m high Batdam(Black Silk Road), 368 Oreums, Hallasan Mountain 1950m are all unique scenery. The verification of this paper demonstrates that Samdasoo's groundwater extraction sea level is equal to the height of Hallasan and that this problem is mathematically complete in neutral plane theory. Donnaeko(700meters above sea level)-Baeknokdamdongneung-Jindallebat-Seongpanak-Gyorae(453 meters)-Witsaeoreum(1700meters) is a rain belt that hits the low-air pressure air-conditioned North Pacific humidity rising from the southeast and the high-pressure cold air of Hallasan Peak. It rains a lot because - and + are neutral plane, which adds to zero. Hallasan is called Jinsan in Jeju history. The answer is Wind Castle. The number of Oreum in Jeju is 369 including Hallasan, and Batdam, which is about 1.5m high, does not collapse even with a typhoon blowing over 50m/s. Because the wind castle's core is 1.5 meters of Batdam and it is a triangular number.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.49-58
• /
• 2014

A low-swing differential near-ground signaling (NGS) transceiver for low-power high-speed mobile I/O interface is presented. The proposed transmitter adopts an on-chip regulated programmable-swing voltage-mode driver and a pre-driver with asymmetric rising/falling time. The proposed receiver utilizes a new multiple gain-path differential amplifier with feed-forward capacitors that boost high-frequency gain. Also, the receiver incorporates a new adaptive bias generator to compensate the input common-mode variation due to the variable output swing of the transmitter and to minimize the current mismatch of the receiver's input stage amplifier. The use of the new simple and effective impedance matching techniques applied in the transmitter and receiver results in good signal integrity and high power efficiency. The proposed transceiver designed in a 65-nm CMOS technology achieves a data rate of 13 Gbps/channel and 0.3 pJ/bit (= 0.3 mW/Gbps) high power efficiency over a 10 cm FR4 printed circuit board.

• Journal of Forest and Environmental Science
• /
• v.33 no.3
• /
• pp.197-201
• /
• 2017

Populus. caspica L. is an Iranian indigenous poplar species which naturally distributed in the northern part of country. Unfortunately, overuse has removed many of the stems of better form, so that natural stands now usually appear small and crook. Therefore genetic variation for selection of new superior clone of this species is needed. Conventional hybridization system is currently used to induce genetic variation in poplar species but incompatibility barriers have been observed between them. In vitro ovule embryo culture was used to overcome incompatibility obstacle for interspecific hybridization between Populus caspica L. with Populus deltoids L.62/75. Female flowers of Populus caspica L. have artificially been pollinated with pollen grain of P. deltoides 62/75 in one direction using twig and pot crossing system. Ovaries at different ages (7, 14 and 21 days after pollination) were disinfected through 70% ethanol for 1 minute, 5% of sodium-hypochlorite solution for fifteen min followed by three time rising with sterile distil-water. Isolated ovaries were then transferred to MS hormone free medium containing 30 and 60 g/L sucrose for embryo development and germination. Collected data have been analyzed by two factorial experimental designs. The results indicated that there were significant differences between age of embryos for development and germination at ${\alpha}=0.01%$. Highest embryo germination (45%) was observed from 21 days old ovaries. No significant differences were observed between MS culture media containing 30 and 60 g/L for percentages of ovary-embryo germination and number of germinated embryo per ovary at ${\alpha}=0.05%$. Fourteen percentage of embryo germination obtained in MS medium supplemented with 60 g/L sucrose, while only 35% of isolated ovaries were able to germinate in MS containing 30 g/L sucrose. Induced plantlets in 4 cm height were transferred into pots containing soilless (1:1:1 peat, per lit and vermiculite) medium for acclimatization. After successful acclimatization, plants were delivered to nursery.

• Journal of Environmental Science International
• /
• v.18 no.3
• /
• pp.289-298
• /
• 2009

The blue-green algae which caused odor problem in the tap water are difficult to precipitate in sedimentation basin and clogged the filter void rapidly. The studies of this paper were not only oxidation, coagulation and sedimentation processes for effectively removing blue-green algae but yellow clay and polyamine for verification as coagulants aids. The results of this research are summarized as follows: Higher ozone dose(C) and longer contact time(T) were needed for a high degree of removing blue-green algae efficiency. the removal rate of blue-green algae was proportional to the $C\times T$ value. The removal percent of chlorophyll-a by sedimentation and filter without pre-ozonation was about 75% but 1 mg/L pre-ozonation could increase the removal percent of chlorophyll-a to 99% and more pre-ozonation could remove completely. Though the removal efficiency of turbidity could increased by high dose of chlorination, the dissolved organic carbon was increased. More chlorine dose from 4 to 10 mg/L dissolved organic carbon was decreased. Using yellow clay as coagulant aids increased density of floc so the settling velocity of floc become rising but polyamine could not increase settling velocity of floc though it could formated large floc.

• Strategy21
• /
• s.41
• /
• pp.30-51
• /
• 2017

Neighboring powers in the Korean Peninsula have started to develop and operate aircraft carriers or equivalent forces to cope with rising North Korean nuclear and missile threats and also to show its national might. For example, the United States has added a aircraft carrier from the 3rd fleet to western pacific theater of operation, while Peoples Republic of China is undergoing operational test of Liaoning as well as preparing for christening of its 2nd aircraft carrier. Japan is flexing its muscle as well by deploying Izumo capable of operating F-35B to Southeast Asia to participate in multilateral exercises starting this year. It is a high time to know more about aircraft carriers or similar types in terms of maritime strategy and history. The U.S. has had by far the vast amount of experiences in utilizing aircraft carrier that it would be beneficial for us to examine U.S. perspectives and its application in the Korean Peninsula. It will provide us with insights to understand and predict what it would be like in times of crisis in the Korean Peninsula in the perspective of aircraft carrier's involvement. This paper intends to show some aspects of future conflicts in the Korean Peninsula and how the ROK Navy can best be ready for such situation. For research purpose, U.S. maritime strategy has been developed in stages ; establishment phase, WWI phase, WWII phase, Cold war phase, post Cold war phase. Each phase includes such factors as threats, strategic concept, applications, and ways to improve maritime strategy. Finally, the role of aircraft carrier based on past history as well as future conflict shines the importance to have power projection capabilities for the ROK Navy. The intrinsic nature of the navy in the world is to project power ashore just as history proved it.