• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.1
• /
• pp.56-63
• /
• 2003

This paper studies that torque model considered with decaying phase back-EMF is different In conduction and commutation period and analyzes the torque pulsation components mathematically. In this paper, it is proposed a novel method to suppress torque pulsation due to commutation time. First, it propose commutation delay time control method, which is to compensate current slope of rising phase and decaying phase to control commutation time. Current ripple is minimized at non-commutating current and torque ripple is reduced below critical speed range that dc link voltage is the same as four times of back-EMF voltage. However, torque ripple still exists due to the relation with back-EMF and commutating current and it is increased on a large scale above critical speed range, especially. Secondly, proposed method is commutation time control, which is considered with torque pulsation due to the relation of back-EMF and commutating current. Through the proposed method, the torque pulsation can be minimized in the whole speed range as well as range over critical speed.

• Journal of Platform Technology
• /
• v.11 no.4
• /
• pp.62-70
• /
• 2023

This research is one of a series of studies to develop a system to help agricultural producers and sellers determine when and how much to ship products to the wholesale market to maximize their profit. The purpose of this research is to incorporate the time-varying quality change effect, which was not used in the previous agricultural and marine product shipping model. The researchers developed four models to measure the quality change effect: quality declining steadily over time, quality declining rapidly at first and then slowly, quality declining first slowly and then rapidly, and quality rising over time and then decreasing again. According to the results of an empirical analysis of the effect of each model's quality change effect on shipments for apples traded in the Garak Wholesale Market from 2014 to 2021, statistical significance was found in the quality change effect of all four models. And there was no significant difference in explanatory power between the four models. Therefore, any of the four models should be introduced into the decision-making system for shipping time for apples.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.2
• /
• pp.37-44
• /
• 2009

In this paper, we propose an efficient method which improves the performance of transmission of PGA which is essential data for real-time earthquake monitoring system. Currently, above 120 earthquake stations were installed nationwide and additional installation is expected because the social interesting of earthquake hazard is rising. Real-time earthquake monitoring system checks earthquake occurrence by using PGA were calculated from acceleration data of each seismic station. An efficient method of PGA data transmission is key factor of real-time monitoring. The key idea of proposed method is to deal with each seismic station using an unique ID, to assign one bit to indicate whether a packet include a station's data or not. Proposed method can contain more station data and decrease the data loss compared to current method. To verify proposed method, we investigate the turnaround time and ratio of data loss using above 91000 packets. As results of experiment. the proposed method is proven that the method need more time about 50% but reduce the data loss about 87% as compared to previous method.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3073-3078
• /
• 2011

Driverless Train Control System has been recently introduced and commercialized in Korea. It is expected that the vehicle with driverless operation system will be used in new lines such as Sinbundang line soon. Therefore it is necessary to change the system operation and conception of the existing train operation system and the necessity of driverless vehicle monitoring system meeting a new paradigm is rising. In order to dispel concerning about safety issues caused by driverless train operation, the importance to establish vehicle error detection, useful fault diagnosis and rapid action plans is higher than ever. For this, efficient and higher level of vehicle supervision & control system should be essentially supported. In this study, remote driverless vehicle monitoring system using by radio communication is suggested to be used for monitoring and controlling important parts of the vehicle and diagnose and take quick actions when vehicles are in trouble at control tower at real time.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.4
• /
• pp.339-349
• /
• 2014

$CO_2$ emission has been gradually increased due to rising fossil fuel use. A gliding arc plasma scrubber (GAPS) was proposed to destruct $CO_2$. For optimum design of GAPS, a CFD analysis has been conducted in different configuration for the system. The parameters considered included gas injection velocity at the nozzle and gas flow rate to gap between electrodes. The reactor configuration affected velocity fields which caused changes in the mixture fraction and the retention time. The mixing effect of $CO_2$ and supplied gas ($CH_4$ and steam) was enhanced by installing a orifice baffle. This revealed that the orifice baffle is effective in $CO_2$ conversion by positioning the reactants in the gas into the center of plasma discharge.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.14 no.2
• /
• pp.130-135
• /
• 2014

For the past three decades, ship-to-ship collision accidents have steadily increased on the coast of South Korea by about 20% annually. Marine accidents have become more likely and more devastating in areas with increasing marine traffic and rising numbers of high-speed ships. Over 30% of the marine accidents in South Korea are concentrated in spring, since Korea's coast is often covered in dense fog at this time of the year. Fog is generated when a large temperature range exists within a day, and this daily temperature range has increased due to abnormal weather conditions. This research proposed a system for transmitting a navigator's intention utilizing electronic methods. A navigator's intention was expressed on the electronic navigation chart for easier understanding of the surrounding situation, and the effectiveness of the system was verified through practical tests.

• Korean Journal of Artificial Intelligence
• /
• v.7 no.1
• /
• pp.13-16
• /
• 2019

While the Chinese banks have started the impact of foreign banks. At the same time, rising pressure on foreign exchange reserves and appreciation of the renminbi has prompted Chinese banks to go abroad and diversify their risks. The financial crisis of 2008 has caused the continued turbulence of the major financial markets around the world, and the valuation of foreign financial institutions has been drastically shrinking, providing opportunities for Chinese banks to carry out overseas M&A. Based on the overseas M&A status of Chinese commercial banks, this paper sums up the characteristics of the overseas M&A. Then taking a series of overseas M&A conducted by ICBC from 2006 to 2011 as an example, it analyzes the relationship between M&A and performance growth using grey incidence model. The test shows: there is a positive correlation between both overseas M&A and interest rate differential with performance growth of ICBC, and overseas M&A transactions role in promoting the performance growth is significantly higher than the interest rate differential.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2835-2838
• /
• 2003

We study the characteristics of oscillating in non-autonomous condition and the conducted noise generation in a RL-photocoupler circuit. This circuit may be shown a period-doubling and a chaos dynamics under any specific conditions of input circuit. But, the relationship between input signals and output signals is different according to the amplitude of driving input voltage. Then, the oscillation noise was analyzed with respect to both the frequency and the amplitude of an external ac signal and do values. The results show that the noise-induced oscillations for falling and rising cycles induced by kick-back effect in an inductor, nonlinear capacitance, nonlinear resistance and charge storage time in a diode and an LED. We also compared the simulation with the experimental results.

• Proceedings of the KOR-KST Conference
• /
• 1996.06a
• /
• pp.3-22
• /
• 1996

To translate the goal of redeveloping Shanghai as one of the international hubs of economy, finance and trade in 2010, the foundation is to be created, and international standing as global city is to be established preliminarily. Transformation of urban functions and approach of "High starting position and jump over" will give impetus to promote Shanghai as an international metropolitan within fairy short period of time. To transform urban functions and translate" High starting position and jump over", certain links which have great impact on Shanghai's rising-up must be handled and normal approach to develop the city must be renovated to reach the goal of establishing an international city. Four strategic approaches as following are explored in this paper : $\bullet$ To transform urban function from industry only to integrated developments. $\bullet$ To break through administrative boundary and expand urban development space. $\bullet$ To develop centralized urban infrastructure framework. $\bullet$ And to erect modern life and culture facilities towards 21st century.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.9
• /
• pp.2381-2389
• /
• 1993

In this paper the design and test results of a dynamic flow rate sensor was reported. This sensor comprises an 2-way cartridge valve as standard hydraulic component and a displacement sensor. Its working principle bases on the linear relationship between the flow rate and the piston displacement of 2-way cartridge valves under constant pressure drop. This principle is well known, however it is not easy to develop a flow rate sensor with the measurement range of 300 1/min, pressure loss of less than 8 bar at 300 1/min, maximum linearity error of less than $\pm$1% and the maximum rising time of 10 ms. This paper describes the design procedure of the flow rate sensor, the improvement procedure of static performance and test method and results of dynamic performance.