• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.74-76
• /
• 2007

Generally, the dynamic parameters by dynamic simulation are calculated from an equivalent circuit parameters in design process. By performing dynamics of motors, it can be achieved design considering control pattern. In this paper, dynamic characteristics of LIM (Linear Induction Motors) is discussed using the new method of equivalent circuit parameters by field analysis. And the system response of VVVF(Variable Voltage Variable frequency) are presented for jerk characteristics represented as acceleration and deceleration by steep trust ripple.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.7-9
• /
• 2007

Generally, the dynamic parameters by dynamic simulation are calculated from an equivalent circuit parameters in design process. By performing dynamics of motors, it can be achieved design considering control pattern. In this paper, dynamic characteristics of LIM (Linear Induction Motors) is discussed using the new method of equivalent circuit parameters by field analysis. And the system response of VVVF(Variable Voltage Variable frequency) are presented for jerk characteristics represented as acceleration and deceleration by steep trust ripple.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.231-234
• /
• 2007

A measurement technique in an industry site is basis technique which is bringing a ripple effect on an increasing productivity. Recently, a measurement request is increasing in the industry field as well as the variety field such as leisure, research. Thus, it is in point of time to secure an internal technique about measurement using a laser. In this paper, we prepare to develop the industrial precision laser distance measure device that is available measuring in several hundred meters[m]. In other words, we are planning to measure a wide distance using a laser diode that has long life and is compact, inexpensive. Through this research, we'll secure the pulse laser control technique, a signal processing, technique for distance calculation about a laser distance measurement system. And hereafter, we'll plan to commercialize a laser distance device using this research.

• Journal of Power Electronics
• /
• v.9 no.3
• /
• pp.430-437
• /
• 2009

This paper presents the dynamic characteristics of buck and buck-boost dc-dc converters with digital filters. At first, the PID, the minimum phase FIR filter and the IIR filter controls are discussed in the buck dc-dc converter. Comparisons of the dynamic characteristics between the buck and buck-boost converters are then discussed. As a result, it is clarified that the superior dynamic characteristics are realized in the IIR filter method. In the buck converter, the undershoot is less than 2% and the transient time is less than 0.4ms. On the other hand, in the buck-boost converter, the undershoot is about 3%. However, the transient time is approximately over 4ms because the output capacitance is too large to suppress the output voltage ripple in this type of converter.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1296-1299
• /
• 2001

In this paper, a simple, novel approach is proposed for a variable hysterisis band current controller which uses feedback techniques to achieve constant switching frequency with good dynamic response. The simulation result shows constant switching frequency and consequenctly the load current ripple decrease.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.965-967
• /
• 2001

전원 측 전압강하/상승 (Voltage sag/swell)을 보상하기 위한 동적전압보상기(Dynamic Voltage Restorer)등의 직렬 보상기에서 스위칭으로 인한 인버터 출력전압의 맥동(ripple)을 제거하기 위해 LC 필터가 사용된다. 본 논문에서는 LC 필터에서 커패시터의 전압을 상태 궤환을 이용하여 제어하는 알고리즘을 제시한다. LC 필터의 이산시간 상태 방정식을 구한 후, 궤환 이득값을 구하는 과정이 z-평면에서 이루어진다. 그리고, 제어기의 계산지연을 고려하여, 상태 관측기를 설계한다. 제안된 제어기는 기존 직렬보상기와 달리 전류 센서를 필요로 하지 않기 때문에 경제적인 이점을 가지게 된다.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.102-105
• /
• 2005

A Effective wall following plays important role for the mapping behaviors which determine the entire memory size and the shape of map before building a map. In case of wall following, attacking those cause by curved wall or obstacles brings a bad stuff that makes ripples on the moving trajectory. These types of ripples come to an end with problems that increase the load of calculation and sensing errors. In this paper, a new sensing method and its corresponding controller are suggested for problems. It minimizes the occurrence of the trajectory ripples.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.81-82
• /
• 2012

본 논문은 고효율 획득 및 입력전류 리플 저감을 위한 3상 부스트 컨버터의 동작 알고리즘을 제안한다. 입력전압별로 인덕터 전류에 따른 투자율 감소를 고려하여 DCM 및 BCM 동작시의 효율과 입력 전류 리플을 수식적으로 분석한다. 이에 따라 3상 부스트 컨버터를 경계 도통 모드+불연속 도통 모드의 혼합 모드에서 동작시키고 타당성을 실험을 통해 검증한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.3
• /
• pp.280-289
• /
• 2015

A high-efficiency full-bridge DC-DC converter with a current-doubler rectifier and an asymmetric pulse-width modulation is proposed. Through the asymmetric pulse-width modulation, the proposed converter achieves zero-voltage switching of power switches without the circulating currents. The proposed converter reduces the output current ripple through the current-doubler rectifier. A control strategy is suggested for the proposed converter to charge battery banks. A constant current and constant voltage charging is performed. The proposed converter achieved a higher efficiency compared with the conventional full-bridge DC-DC converter with a phase-shift modulation. The performance of the proposed converter is evaluated by the experimental results for a 1.0 kW prototype circuit.

• Journal of Magnetics
• /
• v.19 no.3
• /
• pp.282-290
• /
• 2014

This paper discusses the development of a 3.5 kW switched reluctance motor (SRM)-based electric air-conditioning (AC) compressor, focusing primarily on the design aspects of the SRM and the integrated controller. In addition to the increased price of rare-earth magnets, SRM's operation capability at high speed and high temperature makes the SRM a viable alternative to the permanent magnet motor for electrically driven automotive air conditioning compressors. A compact and energy efficient scroll compressor is designed and constructed. Two feasible SRM topologies are considered, in terms of efficiency, torque ripple, and acoustic noise. Compact drive electronics are designed and employed to drive the SRM-based compressor. The static and dynamic performance is validated by simulation and experiment.