• Journal of Aerospace System Engineering
• /
• v.13 no.3
• /
• pp.1-8
• /
• 2019

The electromagnetic forces generate a torque on the gimbal motor, and changes in the coil current causes torque ripple. This affects the gimbals' speed and results to unstable satellite attitude. It is therefore essential to reduce the torque ripple of the gimble motor with the aim of improving the attitude control accuracy of the satellite. This paper theoretically analyzes the torque generated from the modeling of a motor for general concentrated winding and distributed winding. The prototype was designed and fabricated through selection of the winding that reduces the torque ripple through simulation results. The results of the magnetic fields' theoretical analysis and the back electromotive force of the prototype were compared with the calibrated results for verification of conformity and manufacture of the design. The low-speed test proved that the torque ripple is reduced by improving the speed stability.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.4
• /
• pp.553-561
• /
• 2010

In flat panel display or semiconductor industries, they install the equipments with fine line width and high throughput for fabrication and inspection. The equipments are required to have the linear stage which can position the work-piece with high speed, fine resolution on wide range of motion. In this paper, a precision planar linear XY stage is proposed. The stage has a symmetric planar window configuration and is guided by air-bearings on granite plate. The symmetric planar window configuration makes the stage has robustness against dynamic and thermal disturbances. The air-bearings let the stage move smooth on straight guide bar and flat granite surface. The stage is actuated by linear motor with Halbach magnet array (HMA). HMA generates more confined magnetic flux than conventional array. The linear motors are optimized by using sequential quadratic programming (SQP) with the several constraints that are thermal dissipation, required power, force ripple and so on. The planar linear XY stage with the symmetric planar configuration and the linear motors is implemented and then the performance such as force ripple, resolution and stroke are evaluated.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.6
• /
• pp.75-84
• /
• 2014

A linear synchronous motor (Linear Synchronous Motor, under LSM) is suitable for Maglev train. This is 500km/h or more for running high-speed propulsion system of high-efficiency, high-output characteristics. Also, as high-speed running, it is needed solution to reduce output ripple component cause bad riding like noise and vibration. So this paper was designed 500km/h-class Maglev train and analyzed characteristics of the LSM base model using finite element analysis method. Further, improved model is designed to improve characteristics of thrust and levitation force by enforcing design parameters analysis and sensitivity analysis. And it was applied skew on field in order to reduce the ripple component still remaining. Skew interpretation of the two-dimensional is proposed and this is verified by carrying out three-dimensional finite element analysis comparing two values. It proved to be valid of skew of the two-dimensional analysis.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.83-85
• /
• 2007

This paper presents the vibration reduction of PMLSM according to permanent magnet array. The detent force and the lateral force arc generating the thrust ripple that cause vibration in PMLSM. The detent force, the thrust and the lateral force is analyzed by 3D FEM. And the acceleration sensor is used for experimentation of vibration.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.763-765
• /
• 2000

Detent force is produced in a permanent magnet linear machine. It is generally an undesired effect that contributes to the output ripple of machine, vibration and noise. This paper analyzes detent force in a Permanent Magnet Linear Synchronous Motor (PMLSM) by using various detent force minimization techniques. A two-dimensional Finite Element Method(FEM) is used to predict detent forces due to structural factors and non-linearity. And moving node technique for the drawing models is used to reduce modeling time and efforts.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.4
• /
• pp.318-324
• /
• 1999

In this paper. a control method based on finite element analysis is presented to improve the control characteristics of t the permanent magnet linear synchronous motor (PMLSM). In the control method. additional compensation current is a added to the conventional control current according to the position of mover. The characteristics of thrust ripple a according to the position of mover and the current are analyzed by using finite element method (FEM). And. the value of current to compensate the thrust ripple due to the cog밍ng force is calculated from the analysis results. The c characteristics according to control method are compared in case of speed control. and to conform the validity of the p presented method, a test set is built and experiments are performed.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.840-842
• /
• 2001

The cogging torque and torque ripple in motor which cause noise and vibration are an inevitable phenomenon and they give a bad effect to motor performance. So we are required to reduce the cogging torque and torque ripple not by electrical controlling but by changing the inner mechanical structure and we focused on the permanent magnet. In this research, we calculated current, torque, Back-EMF(electromotive force) and cogging torque according to the change of the magnet shape using two dimensional FEM(Finite Element Method). Maxwell stress tensor and time-stepping method. From the results, we present an appropriate model that can satisfy both low cogging torque, low torque ripple and high efficiency.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.4
• /
• pp.878-888
• /
• 2016

Cogging torque has a negative impact on the operation of permanent magnet machines by increasing torque ripple, speed ripple, acoustic noise and vibration. In this paper Magnet Shifting Method has been used as a tool to reduce the cogging torque in inset Line Start Permanent Magnet Synchronous Motor (LSPMSM). It has been shown that Magnet Shifting Method can effectively eliminate several lower-order harmonics of cogging torque. In order to implement the method, first the expression of cogging torque is studied based on the Fourier analysis. An analytical expression is then introduced based on Permanent Magnet Shifting to reduce cogging torque of LSPMS motors. The method is applied to some existing machine designs and their performances are obtained using Finite Element Analysis (FEA). The effect of magnet shifting on pole mmf (magneto motive force) distribution in air gap is discussed. The side effects of magnet shifting on back-EMF, core losses and torque profile distortion are taken into account in this investigation. Finally the experimental results on two prototypes 24 slot 4 pole inset LSPMS motors have been used to validate the theoretical analysis.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.12
• /
• pp.1695-1702
• /
• 2015

This paper presents the characteristic analysis and experiment of force characteristics in permanent magnet linear synchronous motor for accuracy prediction of linear motion machine tools. In particular, the pitching moment resulting from attraction force ripple has been analysed and tested. Firstly, we analysed the characteristics of detent force, attraction force, and pitching moment in permanent magnet linear synchronous motor according to the design techniques such as auxiliary teeth, chamfering, and permanent magnet skewing. In addition, we suggested the experimental set for measurement of pitching moment. Finally, the results from measurement shows the good agreement with those obtained from finite element analysis results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.816-821
• /
• 2002

It is getting more important that energy efficiency and manufacturing cost of the electric motor in appliance. The SRM has been alternative choice. But acoustic noise and harshness in this motor was widely known. So this paper had been studied on the noise reduction of a SRM in air conditioner. This works include some parameters regarding to blown noise sources like a reluctance torque ripple, air gap eccentricity, Especially, it was focused on dynamic characteristics of the system based on mechanical viewpoint. It came to successful results. Besides, this gave us a validity of phase excitation in experimental measurements.