• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.387-394
• /
• 2000

Theoretical and experimental study is conducted on the contact pressure distribution of a radial tire in motion under various camber angles. Tire construction is modelled by a spring bedded elastic ring, consisted of sidewall springs and a composite belt ring. The contact area is assumed to be a trapezoidal shape varying with camber angles and weighted load. The basic equation in a quasi-static form is derived for the deformation of a running belt with a constant velocity by the aid of Lagrange-Euler transformation. Galerkin's method and stepwise calculation are applied for solving the basic equation and the mechanical boundary condition along both sides of the contact belt part subjected to shearing forces transmitted from the sidewall spring. Experimental results on the contact pressure, measured by pressure sensors embedded in the surface of the drum tester, correspond well with the calculated ones for the test tire under various camber angles, running velocities and weighted loads. These results indicate that a buckling phenomenon of the contact belt in the widthwise direction occurs due to the effect of camber angle.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권5호
• /
• pp.684-687
• /
• 2004

A study was conducted to determine the effect of live weight of pheasants on egg production and egg quality characteristics. A total of 48 ring-necked pheasants were divided into control, heavy, middle and light BW groups. Live weights of the control were 1,187 g, 1,352.92 g for heavy group, 1,247.92 g for middle group and 1,003.33 g for light group. Egg production of groups were found as 47.32, 42.82, 45.79 and 46.51% respectively, in 10 weeks of period. There were no statistical differences on egg production among the groups. The effect of live weight on egg weight, shape index, specific gravity, shell weight, shell thickness, Haugh Unit, yolk weight and albumen weight were found statistically significant (p<0.05). The effect of live weight on albumen index, membrane weight and membrane thickness were found not important (p>0.05). On the other hand, other important factors to be effective on the egg quality of pheasants should be investigated. As a result of this study, live weight of pheasant hens is not an important factor to obtain high egg production in pheasants. But, body conformation of breeding materials should be in good conditions.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.381-382
• /
• 2002

The Fluid film between the valve plate and the cylinder block was measured by use of a gap sensor and the mercury-cell slip ring unit under real working conditions. During the operating periods, experiments with discharge pressure, revolution speed, and valve geometry was carried out for the fluid film on the valve plate. To investigate the effect of the valve shape, we designed two valve plates each having a different shape; the first valve plate was a plane valve plate. while the second valve plate was a spherical valve plate. It was noted that these two valve plates observed different aspects of the fluid film characteristics between the cylinder block and the valve plate. The leakage flow rate and the shan torque were also investigated in order to clarify the difference between these two types of valve plates. From the results of this study. we found that the spherical valve plate estimated good fluid film patterns and performance more than the other valve plate in oil hydraulic axial piston pumps.

• Journal of Mechanical Science and Technology
• /
• 제19권2호
• /
• pp.655-663
• /
• 2005

Tribological characteristics in the sliding parts of oil hydraulic piston pumps are very important in increasing overall efficiency. In this study, the fluid film between the valve plate and the cylinder block was measured by using a gap sensor and the mercury-cell slip ring unit under real working conditions. To investigate the effect of the valve shape, we designed three valve plates each having a different shape. One of the valve plates was without bearing pad, another valve plate had bearing pad and the last valve plate was a spherical valve plate. It was noted that these three valve plates observed different aspects of the fluid film characteristics between the cylinder block and the valve plate. The leakage flow rates and the shaft torque were also investigated in order to clarify the performance difference between these three types of valve plates. From the results of this study, we found that the spherical valve plate estimated good fluid film patterns and good performance more than the other valve plates in oil hydraulic axial piston pumps.

• 한국전자파학회논문지
• /
• 제25권5호
• /
• pp.491-503
• /
• 2014

본 논문에서는 모노폴과 같은 방사특성을 갖고 인체 표면 간 통신을 위한 $TM_{31}$ 고차 모드 반원-링 마이크로스트립 패치 안테나를 제안하였다. 제안된 안테나는 단락 핀을 이용하여 $TM_{31}$ 고차 공진 모드를 형성하였고, 평면형임에도 불구하고 모노폴과 같은 방사특성을 갖는다. 패치안테나의 좁은 대역폭을 확장하기 위해 $TM_{31}$ 모드 C-형 반링 패치를 반원 패치에 인접시켰으며, 소형화를 위해 half mode를 사용하였다. 인체 착용환경을 고려하여 마이크로스트립 라인을 이용하여 급전하였다. 제안된 안테나는 ISM(Industrial, Scientific, and Medical) 2.45 GHz 대역(2.4~2.485 GHz)에서 $0.25{\lambda}_0{\times}0.46{\lambda}_0{\times}0.025{\lambda}_0$의 크기를 갖고, 2.38~2.49 GHz에서 4.24 %의 10-dB 반사손실 대역폭을 갖는다. 인체의 영향을 고려하기 위해 2/3 근육-등가 반고체형 모의인체를 제작하고, 이를 이용하여 안테나에 미치는 인체의 영향을 분석, 검증하였다. 또한, 실제 인체 상황에서 제안된 안테나를 통해 인체 표면 간 링크의 통신 성능 분석을 위한 실험을 수행하였다.

• Journal of Welding and Joining
• /
• 제18권1호
• /
• pp.70-76
• /
• 2000

A rolled steel for structural parts and lead bronze alloy were bonded each other by a new semi-solid diffusion bonding process to investigate the effect of the process parameters, for example bonding temperature and bonding time, on the interface characteristics, and bonding behavior. It can be possible that manufacture of the bonded steel/lead bronze which has a cylindrical shape with inserted the lead bronze alloy into the steel ring by the diffusion bonding process under the semi-solid condition of the lead bronze alloy without any pressure and flux. It has been know that the control of the amount of the liquid phase in semi-solid lead bronze alloy was very important to obtain soundness interface, since the shear strength of the bonded steel/lead bronze at 850℃ for 60 minutes under the condition of about 40% of the liquid phase in the lead bronze alloy shows maximum value, 210 MPa. The shear strength increases with an increase in bonding time and show maximum value, and then decreases.

• Journal of Magnetics
• /
• 제17권2호
• /
• pp.100-108
• /
• 2012

Flux concentrated permanent magnet transverse flux machines, FCPM-TFMs, with segmented stators require multi-turn concentric saddle coils to replace the ring coils, which are normally utilized in conventional layeredphase TFM constructions. In this paper, we investigate the influence of the shape of saddle phase windings and their parameter variations on the output torque productivity. Non-meshed coils evaluated via a finite element method (FEM) to examine the effect of the coil's location within one phase on machine performance. By using meshed coils, the analysis can be extended to inspect the distributions of magnetic field strength as well as current density in the coils. Throughout the study, the influence of design parameters on the output torque for two stator structures, i.e., a laminated and soft magnetic composite (SMC), are evaluated.

• 비파괴검사학회지
• /
• 제28권2호
• /
• pp.199-204
• /
• 2008

The generation of axisymmetric Lamb waves and interaction with wall thinning (corrosion) defects in hollow cylinders are simulated using the finite element method. Guided wave interaction with defects in cylinders is challenged by the multi-mode dispersion and the mode conversion. In this paper, two longitudinal, axisymmetric modes are generated using the concept of a time-delay periodic ring arrays (TDPRA), which makes use of the constructive/destructive interference concept to achieve the unidirectional emission and reception of guided waves. The axisymmetric scattering by the wall thinning extending in full circumference of a cylinder is studied with a two-dimensional FE simulation. The effect of wall thinning depth, axial extension, and the edge shape on the reflections of guided waves is discussed.

• 소성∙가공
• /
• 제30권3호
• /
• pp.149-156
• /
• 2021

Fine blanking is a high-precision process combining principles of metal stamping and cold forming. Unlike conventional metal stamping, fine blanking uses a special triple action such as V-ring force, counter force, shearing force. This study performed the effect of pocket-shaped compression molding on the mold life of the fine blanking using the 7.4mm thick SM45C material. In order to determine the lifespan of the punch and die in the fine blanking molds, a trial mold was manufactured and various punch materials were selected to perform the mold life test. A study on the life of a fine blanking mold by applying a thick plate material was experimentally performed through a mold test.

• 대한기계학회논문집A
• /
• 제38권12호
• /
• pp.1325-1333
• /
• 2014

Near miss 방식 대응체의 충격자 분산 패턴은 위협체의 무력화에 큰 영향을 미친다. 본 연구에서는 near miss 방식 대응체의 원통형 텅스텐 충격자가 폭발에 의하여 분산될 경우 그 패턴을 수치해석적으로 분석하였다. 폭약의 질량과 형상을 충격자의 분산 패턴에 영향을 미치는 인자로 고려하였으며 두 가지 형상 모델 즉, 상부와 하부가 동일한 두께를 갖는 평행 형상과 상부 및 하부 두께가 각기 다른 테이퍼 형상으로 설정하였다. 해석 결과, 분산된 충격자는 임의 공간의 2 차원 평면상에서 고리 모양을 형성하였으며 폭약 형태가 동일한 경우 폭약 질량이 증가함에 따라 화망 면적은 증가하고, 아울러 테이퍼 형상 폭약의 경우, 평행 형상의 폭약에 비해 큰 화망 면적이 형성됨을 확인하였다. 화망 면적과 충격자 분산 밀도 평가를 바탕으로 near miss 방식 대응체의 충격자 분산 패턴 제어를 위해서는 물리적 특성, 즉 폭약의 질량뿐 만 아니라 형상 또한 주요 설계 요소가 됨을 알 수 있었다.