• 폴리머
• /
• 제24권3호
• /
• pp.407-417
• /
• 2000

고분자 주쇄에 cyclobutane 또는 페닐과 방향족 술포닐옥시이미드 구조를 갖는 감광성 폴리이미드를 합성하여 광분해 특성에 있어서 고분자의 구조가 미치는 영향을 조사하였다. 폴리이미드는 N-히드록시와 염화 술포닐의 축중합에 의해 제조하였다. 합성된 폴리이미드는 25$0^{\circ}C$까지 열분해가 일어나지 않고 안정하였다. 254nm의 광조사에 따른 폴리이미드의 광분해는 분광학적 측정에 의해 N-O 결합의 절단 또는 이미드 moiety의 계열에 기인되는 것을 알 수 있었다. 본 연구의 폴리이미드는 포지티브형의 광분해성 고분자로의 활용이 가능한 것이 확인되었으며, 특히 pyromellitic diimide moiety를 함유하는 폴리이미드의 포지티브 화상은 높은 감도와 해상도를 나타내었다.

• Bulletin of the Korean Chemical Society
• /
• 제20권4호
• /
• pp.422-426
• /
• 1999

The Grignard reactions of bis(chloromethyl)dimethylsilane (1) with trimethylchlorosilane (2) in THF give both the intermolecular C-Si coupling and intramolecular C-C coupling products. At beginning stage, 1 reacts with Mg to give the mono-Grignard reagent ClCH2Me2SiCH2MgCl (1) which undergoes the C-Si coupling reaction to give MC2Si(CH2SiMe3)2 3, or C-C coupling to a mixture of formula Me3SiCH2(SiMe2CH2CH2)nR1 (n = 1, 2, 3, ..; 4a, R1I = H: 4b, R1 = SiMe3). In the reaction, two reaction pathways are involved: a) Ⅰ reacts with 2 to give Me3SiCH2SiMe2CH2Cl 6 which further reacts with Mg to afford a Me2SiCH2Mel-SiCH2MgCl (Ⅱ) or b) I cyclizes intramolecularly to a silacyclopropane intermediate A, which undergoes a ring-opening polymerization by the nucleophilic attack of the intermediates I or Ⅱ, followed by the termination reaction with H2O and 2, to give 4a and 4b, respectively. As the mole ratio of 2/1 increased from 2 to 16 folds, the formation of product 3 increased from 16% to 47% while the formation of polymeric products 4 was reduced from 60% to 40%. The intermolecular C-Si coupling reaction of the pathway a becomes more favorable than the intramolecular C-C coupling reaction of the pathways b at the higher mole ratio of 2/1.

• 폴리머
• /
• 제38권1호
• /
• pp.108-112
• /
• 2014

도파민 및 에틸렌디아민의 폴리숙신이미드(polysuccinimide)와의 연속적인 개환 아미놀리시스 반응을 통해 카테콜 및 1차 아민기를 곁가지에 함유한 접착성 폴리아스팔트아미드를 합성하고, 산화제로서 $NaIO_4$를 사용한 상기 고분자 수용액의 산화적 젤화 반응을 관찰하였다. FTIR, UV-vis과 oscillatory rheometry를 이용하여 산화성 가교반응을 통한 젤 형성을 규명하고, 제조된 젤의 수팽윤도, 열중량분석(TGA) 및 SEM 모폴로지를 조사하였다.

• Macromolecular Research
• /
• 제17권3호
• /
• pp.156-162
• /
• 2009

Supramolecular hydrogels were instantaneously fabricated by mixing aqueous solutions of $\alpha$-cyclodextrins ($\alpha$-CDs) and amphiphilic methoxy (polyethylene glycol) (MPEG)-$\varepsilon$-caprolactone (CL) oligomer, which was synthesized via the ring-opening polymerization of the CL monomer using low-molecular-weight MPEG ($M_n$ of MPEG=2,000 g/mol) as an initiator. The supramolecular structure of the hydrogels was revealed by X-ray diffraction (XRD) analyses. Rheological studies of the hydrogels revealed an elastic character when the number of CL units in the oligomer was more than 2, and the obtained hydrogels showed high storage modulus but relatively low shearing viscosity due to the low-molecular-weight character of the oligomer, which was more preferable for use as an injectable delivery system. The physical properties of the hydrogels could be modulated by controlling the chain morphology and concentration of the oligomers, as well as the feed molar ratio of the oligomer to $\alpha$-CD. The components of the supramolecular hydrogels are biocompatible and can readily be eliminated from the body. These features render the supramolecular hydro gels suitable as drug delivery systems and tissue engineering scaffolds.

• Corrosion Science and Technology
• /
• 제20권4호
• /
• pp.175-182
• /
• 2021

Magnesium alloy is limited in the industrial field because its standard electrode potential is -2.363 V vs. NHE (Normal Hydrogen Electrode) at 25 ℃. This high electrochemical activity causes magnesium to quickly corrode with oxygen in air; chemical conversion coating prevents corrosion but causes surface defects like cracks and pores. We have examined the anti-corrosion effect of sol-gel coating sealed on the defected conversion coating layer. Sol-gel coatings produced higher voltage current and smaller pore than the chemical conversion coating layer. The conversion coating on magnesium alloy AZ31 was prepared using phosphate-permanganate solution. The sol-gel coating was designed using trimethoxymethylsilane (MTMS) and (3-Glycidyloxypropyl) trimethoxysilane (GPTMS) as precursors, and aluminum acetylacetonate as a ring-opening agent. The thermal shock resistance was tested by exposing specimens at 140 ℃ in a convection oven; the results showed changes in the magnesium alloy AZ31 surface, such as oxidization and cracking. Scanning electron microscope (FE-SEM) analysis confirmed a sealed sol-gel coating layer on magnesium alloy AZ31. Electrochemical impedance spectroscopy (EIS) measured the differences in corrosion protection properties by sol-gel and conversion coatings in 0.35 wt% NaCl solution, and the potentiodynamic polarization test and confirmed conversion coating with the sol-gel coating show significantly improved resistance by crack sealing.

• Nano
• /
• 제13권11호
• /
• pp.1850132.1-1850132.14
• /
• 2018

The direct synthesis of metal-organic frameworks (MOFs) with acidic and basic active sites is challenging due to the introduction of functional groups by post-functionalization method often jeopardize the framework integrity. Herein, we report the direct synthesis of acid-base bifunctional MOFs with tuning acid-base strength. Employing modulated hydrothermal (MHT) approach, microporous MOFs named $UiO-66-NH_2$ was prepared. Through the ring-opening reaction of 1,3-propanesultone with amino group, $UiO-66-NH_2-SO_3H-type$ catalysts can be obtained. The synthesized catalysts were well characterized and their catalytic performances were evaluated in one-pot glucose to 5-HMF conversion. Results revealed the acid-base bi-functional catalyst possessed high activity and excellent stability. This work provides a general and economically viable approach for the large-scale synthesis of acid-base bi-functional MOFs for their potential use in catalysis field.

• Journal of Microbiology and Biotechnology
• /
• 제29권1호
• /
• pp.59-65
• /
• 2019

Fusaricidin analogs, produced by Paenibacillus polymyxa, were tested for selective control of a major bloom-forming cyanobacterium, Microcystis sp. Fusaricidin (A and B mixtures) and four analogs were isolated from P. polymyxa E681 and investigated for their inhibition of cyanobacterial cell growth. Among the four fusaricidin analogs, fraction 915 Da (designated as Fus901) showed growth inhibition activity for Microcystis aeruginosa but not for Anabaena variabilis and Scenedesmus acutus. Microcystin concentration decreased up to 70% and its content per cell also decreased over 50% after 3 days. Fusaricidin exhibited growth inhibition against Gram-positive bacteria but Fus901 did not. Molecular weights of fusaricidin A and B were 883 Da and 897 Da, whereas that of Fus901 was 915 Da. Structure analysis by a ring-opening method revealed a linear form for Fus901. Expression of the pod gene related to oxidative stress was increased 2.1-fold by Fus901 and that of mcyD decreased up to 40%. These results indicate that Fus901 exerts oxidative stress against M. aeruginosa. Thus, Fus901 can be used as a selective cyanobactericide without disturbing the ecological system and could help in decreasing the microcystin concentration.

• Bulletin of the Korean Chemical Society
• /
• 제11권4호
• /
• pp.318-323
• /
• 1990

The bis(malonato)diaquochromate(III) ion, $Cr(C_3H_2O_4)_2^-$ in acidic solution hydrolyzes to give $Cr(C_3H_2O_4)^{+}.$ This reaction is catalyzed by ferric ion and the rate law for this cation catalyzed-aquation in a $HClO_4/NaClO_4$ medium, $I = 1.00 M, is-d[Cr(C_3H_2O_4)_2^-]/dt = ({\kappa}_1[Fe^{3+}] + {\kappa}_2[H^+])[Cr(C_3H_2O_4)_2^-]$ where ${\kappa}_1(25^{\circ}C) = 4.72×10^{-5} M^{-1}sec^{-1} ({\Delta}H^{\neq} = 22.5 Kcal/mol, {\Delta}S^{\neq} = - 2.58 eu) and {\kappa}_2(25^{\circ}C) = 4.75{\times}10^{-5} M^{-1}sec^{-1} ({\Delta}H^{\neq} = 21.2 Kcal/mol, {\Delta}S^{\neq} = - 7.13 eu).$ Rapid preequilibrium association of basic Cr-bound oxygen with $Fe^{3+},$ followed by rate-determining ring opening, is proposed to account for the ${\kappa}_1,$ hydrolysis pathway.

• Journal of Microbiology and Biotechnology
• /
• 제33권10호
• /
• pp.1317-1328
• /
• 2023

Green tea (GT) polyphenols undergo extensive metabolism within gastrointestinal tract (GIT), where their derivatives compounds potentially modulate the gut microbiome. This biotransformation process involves a cascade of exclusive gut microbial enzymes which chemically modify the GT polyphenols influencing both their bioactivity and bioavailability in host. Herein, we examined the in vitro interactions between 37 different human gut microbiota and the GT polyphenols. UHPLC-LTQ-Orbitrap-MS/MS analysis of the culture broth extracts unravel that genera Adlercreutzia, Eggerthella and Lactiplantibacillus plantarum KACC11451 promoted C-ring opening reaction in GT catechins. In addition, L. plantarum also hydrolyzed catechin galloyl esters to produce gallic acid and pyrogallol, and also converted flavonoid glycosides to their aglycone derivatives. Biotransformation of GT polyphenols into derivative compounds enhanced their antioxidant bioactivities in culture broth extracts. Considering the effects of GT polyphenols on specific growth rates of gut bacteria, we noted that GT polyphenols and their derivate compounds inhibited most species in phylum Actinobacteria, Bacteroides, and Firmicutes except genus Lactobacillus. The present study delineates the likely mechanisms involved in the metabolism and bioavailability of GT polyphenols upon exposure to gut microbiota. Further, widening this workflow to understand the metabolism of various other dietary polyphenols can unravel their biotransformation mechanisms and associated functions in human GIT.

• Design & Manufacturing
• /
• 제17권3호
• /
• pp.28-33
• /
• 2023

The conventional FRP (Fiber Reinforced Plastic) manufacturing process used thermoset resins for ease of molding but faced the issue of non-recyclability. To address these shortcomings, a new process utilizing thermal plastic resin was developed. However, due to the high viscosity of thermal plastic resin, problems such as fiber deformation and a reduced fiber volume fraction occurred during the high-temperature, high-pressure process. In this study, to overcome the limitations of the conventional process, fiber-reinforced composite materials were manufactured through in-situ polymerization using PLA (Poly L-Lactide) resin in the VA-RTM (Vacuum Assistance Resin Transfer Molding) process. The fiber volume of the produced specimens was calculated, and resin impregnation and porosity were confirmed through optical microscopy. Additionally, molecular weight analysis using GPC (Gel Permission Chromatography) demonstrated improvements over the conventional process and emphasized the essential requirement of temperature control.