• 제목/요약/키워드: Ring Spring

검색결과 91건 처리시간 0.023초

Some features of Korean Seas observed by ADEOS/OCTS

  • Son, Seung-Hyun;Yoo, Sin-Jae
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
    • /
    • pp.64-69
    • /
    • 1998
  • The chlorophyll-a concentration measured by OCTS could be used for observing the physical phenomena such as eddies, fronts, and up welling in the oceans as well as for studying the ecology of phytoplankton. In this study, biological and physical features in the East Sea/Japan Sea (the East Sea) and the Yellow Sea observed by OCTS are analyzed in comparison with other satellite data. And in situ chlorophyll data were compared with OCTS Level 2 chlorophyll data. There was a striking correspondence between the satellite chlorophyll structure and other satellite data in the East Sea in the spring. Very complicated ring structures in the 557 are reflected in chlorophyll structure. In the Yellow Sea, the surface structure was rather simple. While the discrepancies between in situ and OCTS algorithm version 3 chlorophyll were small in the East Sea, those for the Yellow Sea were rather big. Comparison with CZCS data for similar time of the year (May-June) shows that OCTS chlorophyll is higher in general. Although the error is partly due to the fact that NASDA chlorophyll algorithm is an empirical algorithm for case 1 water, how much of this error is also due to the errors in sensor calibration or in atmospheric correction is not clear.

  • PDF

전통 황칠 도료 개발에 관한 연구(I) - 황칠나무와 황칠액의 해부학적 특성과 화학적 조성- (Studies on the Development of Traditional Korean Golden Varnish(Hwangchil)(I) - Anatomical Characterisitics and Chemical Composition of Wood and Exudates of Hwangchil-namu(Dendropanax morbifera)-)

  • 임기표;김윤수;정우양
    • Journal of the Korean Wood Science and Technology
    • /
    • 제25권3호
    • /
    • pp.24-28
    • /
    • 1997
  • As a way to revive the traditional technology of Korean golden varnish(Hwangchill), the exudates of D. morbifera, this study was carried out at first to investigate the anatomical characteristics and the chemical composition of D. morbifera stems and their exudates. Trees of more than 20 years old were harvested at Wando and Jejudo islands in the southwestern part of Korean peninsula during different physiological seasons of winter, spring, and summer, The results obtained are as follows: 1. In the anatomical aspect of wood, Hwangchil woods is ring-porous wood, has alternate inter-vessel pittings and horizontal intercellular canal in xylem. 2. In the chemical aspect of wood and bark, the general compositions appeared hot to differ from those of other hardwoods, and ash and alcohol-benzene extractives showed little increase with the increase of atmospheric temperature of harvesting season. 3. In the solvent-sequential extraction of bark, wood and exudate, the exudates was extracted up to 80% by ether, but the bark and wood contained a very small amount of ether extractives, about 2% in the bark and 0.5% in the xylem.

  • PDF

Event Horizon Telescope : Earth-sized mm-VLBI array to image supermassive black holes

  • Kim, Jae-Young
    • 천문학회보
    • /
    • 제44권1호
    • /
    • pp.59.1-59.1
    • /
    • 2019
  • Immediate vicinity of a supermassive black hole (SMBH) is an important place to test general relativity in strong gravity regime. Also, this is a place where mass accretion and jet formation actively occurs at the centers of active galaxies. Theoretical studies predict presence of bright ring-like emission encircling an accreting SMBH with a diameter of about 5 Schwarzschild radii, and a flux depression at the center (i.e., BH shadow). Direct imaging of the BH shadow is accordingly of great importance in modern astrophysics. However, the angular sizes of the horizon-scale structures are desperately small (e.g., ~40-50 microarcseconds (uas) diameter for the nearest best candidates). This poses serious challenges to observe them directly. Event Horizon Telescope (EHT) is a global network of sensitive radio telescopes operating at 230 GHz (1.3 mm), providing ultra-high angular resolution of 20 uas by cutting-edge very long baseline interferometry techniques. With this resolution, EHT aims to directly image the nearest SMBHs; M87 and the galactic center Sgr $A{\ast}$ (~40-50 uas diameters). In Spring 2017, the EHT collaboration conducted a global campaign of EHT and multiwavelength observations of M87 and Sgr $A{\ast}$, with addition of the phased ALMA to the 1.3mm VLBI array. In this talk, I review results from past mm-VLBI and EHT observations, provide updates on the results from the 2017 campaign, and future perspectives.

  • PDF

한국 남$\cdot$서해 및 동중국해 북부해역에 출현하는 수온전선 (A Study on the Temperature fronts observed in the South-West Sea of Korea and the Northern Area of the East China Sea)

  • 양영진;김상현;노홍길
    • 한국수산과학회지
    • /
    • 제31권5호
    • /
    • pp.695-706
    • /
    • 1998
  • 한국 남$\cdot$서해 및 동중국해 북부 해역에 나타나는 표층수온 전선의 위치, 형태, 시기별 변동상황, 전선형성기구 등을 규명하기 위하여 1991년부터 1996년까지 국립수산진흥원에서 NOAA 화상자료로부터 구한 표면수온분포도와 제주도청 어업지도선 등을 이용하여 월별로 관측한 제주해협 해양관측자료를 이용하여 분석 정리한 결과를 요약하면 다음과 같다. 1. 한국 남$\cdot$서해 및 동중국해 북부 해역에 형성되는 연안형 및 외해형 전선대 양상은 여러 가지 Pattern으로 구분되어 진다. 즉, 1월부터 4월까지 한국 남$\cdot$서 연안역에 나타나는 "L" 자형의 연안형 전선대와 제주도 남서쪽 해역에 북서에서 남동방향으로 길게 형성되는 빗금형 ($\setminus$)의 외해형 전선대가 제주도 서쪽 해역에서 서로 마주치지 않아 "L" 자의 "-"를 비스듬히 세운 형상의 동계형 (ㄴ) 전선대가 형성된다. 그리고 6월부터 8월까지 한국 남$\cdot$서해 연안역에만 전선이 나타나는 "L" 자형의 하계형전선대, 5월과 9월, 10원에 나타나는 한국 남$\cdot$서해의 "L" 자형 연안역 전선대와 제주도 남서해역의 외해형전선대가 제주도 주변에서 서로 마주쳐 "Y" 자가 왼편으로 누운 것과 같은 삼거리 모양의 춘$\cdot$추계형 ($\succ$) 전선대가 형성된다. 또 11월과 12월에 나타나는 한국 남해연안역의 직선형의 연안형 전선대와 제주도 남서해역의 외해형 전선대가 제주도 서쪽에서 마주쳐 "$\angle$" 모양으로 되는 늦가을형으로 대별된다. 2. 전선의 단기변동 경향은 수일 이내에는 그 위치가 크게 이동하지 않고, 또 한국 남해 연안역 전선대보다 제주도 남서해역 전선의 위치 변화가 크다. 한국 남해연안역에는 주년 연안형 전선대가 출현하며 이 전선대는 대체로 동계에 연안역에 가장 접근하고 춘$\cdot$추계에 가장 남쪽으로 이동하는 남북 이동을 하며, 제주도 남서해역 외해형 전선대는 대마난류 분포범위의 계절변화와 같이 동계에는 가장 서쪽에, 춘 추계에는 가장 동쪽에 형성되는 동서방향 이동이 있고 한국 남서해역 연안형 전선대도 주년 나타나지만 3월, 4월, 11월에 가장 약화된다. 3. 제주해협에는 추자도에서 여서도 또는 청산도를 잇는 선 부근에 주년 표층수온 전선이 형성되고, 또 11월$\~$1월을 제외한 시기에 제주도 연안에는 하계에 환(Ring-shaped)의 조석전선이 나타나며 특히 5월과 10월에는 제주도 동쪽과 남쪽에 제주도 연안수와 대마난류수간에 전선이 형성되어 한국 남해의 연안형 전선대와 제주도 남서해역의 외해형 전선대를 연결하고 있다.

  • PDF

임하댐 주변지역(周邊地域)의 기상환경(氣象環境) 변화(變化)가 수목생장(樹木生長)에 미치는 영향(影響)에 관한 정량적(定量的) 분석(分析) (Quantitative Analysis of Effects on Tree Growth of the Changes in Meteorological Environment around Imha Dam)

  • 신만용;천정화
    • 한국산림과학회지
    • /
    • 제85권3호
    • /
    • pp.462-471
    • /
    • 1996
  • 본 연구는 인공호수(人工湖水) 조성에 의한 기상환경(氣象環境) 변화(變化)가 주변지역의 수목생장(樹木生長)에 어떻게 작용하는지 밝히기 위하여 수행되었다. 이를 위하여 먼저 지형기후학적(地形氣候學的)인 방법에 의하여 임하댐 주변지역의 담수전(湛水前)과 담수후(湛水後)의 기후값을 추정(推定)하고, 그 편차(偏差)에 의하여 담수에 의한 기상환경 변화를 정량화(定量化)하였다. 또한 임하댐 주변에 생육하고 있는 소나무를 대상으로 거리별(距離別)로 30m에서 5km까지 6단계로 나누어 생장(生長)을 분석(分析)하고 기상변화와 비교함으로써 댐 건설에 의한 기상환경 변화가 주변지역의 수목생장에 미치는 영향(影響)을 정량적으로 분석하였다. 댐이 건설된 이후의 수목생장(樹木生長)은 댐으로부터 1km 이내의 가까운 거리에 있는 수목은 생장이 증가(增加)고 있었지만, 1km 이상 떨어진 지역에 생육(生育)하는 임목은 기상환경 변화와 무관(無關)함을 알 수 있었다. 댐에서 가까운 지역에 생육(生育)하는 수목의 생장 증가는 주로 봄철의 강수량(降水量) 증가와 생육기간 동안의 일사량(日射量) 총량이 담수전에 비하여 늘어난 것에 기인(起因)한 것으로 판단된다. 그러나 월평균기온(月平均氣溫)의 변화량(變化量) 소나무 생장에 큰 영향을 미치지 못한 것으로 추측(推測)되는데 이는 변화량 자체가 크지 않았기 때문으로 생각된다.

  • PDF

지리산 천왕봉지역 구상나무의 연륜기후학적 해석 (A Dendroclimatic Analysis on Abies koreana in Cheonwang-bong Area of Mt. Chiri, Korea)

  • 박원규;서정욱
    • 한국제4기학회지
    • /
    • 제13권1호
    • /
    • pp.25-33
    • /
    • 1999
  • 지리산 천왕봉 아고산 지역 (해발 1,600∼l,700m)에 자라는 구상나무의 연륜생장과 기후와의 관계를 북사면(장군봉)과 남사면(중봉)을 대상으로 조사하였다. 각 지역에서 10여 본에서 생장편을 임목당 2개씩을 채취하였다. 채취된 코어는 크로스데이팅후 연륜폭을 측정하여 얻어진 연륜시리즈(연대기)를 표준화한 후, 기후인자(월강수량과 월평균기온)와 연륜생장과의 관계를 반응함수를 이용하여 분석하였다. 반응함수로 즉 월기후인자로 연륜연대기 총변동의 45.9∼53.8%를 설명할 수 있었다. 강수와 연륜생장과의 관계는 중봉과 장군지역 모두에서 3∼5월, 8월에 대해 정의 관계를 보이고 2월과 7월에 대해서는 부의 관계를 나타내 유사한 결과를 보였다. 기온에 대한 관계는 남사면에 위치한 구상나무가 북사면에 위치한 구상나무에 비해 2월과 8월에서 높은 부의 관계를 나타내었으며 4월 기온과는 두 지역 모두 유의한 정의 관계를 나타내었다. 두 사면지역의 구상나무 연륜생장과 기후와의 관계는 전체적으로는 큰 차이를 보여주지 않았다. 아한대 수종의 연륜생장이 강수보다는 기온에 민감하여 월기온과 대체로 정의 관계를 갖는 반면에 지리산 구상나무의 경우는 기온과 부의 관계를 갖는 경향이 크며 강수의 영향 특히 봄기간 동안의 수분수지가 중요한 것으로 생각된다. 구상나무 연륜과 기후와의 유의한 관계를 이용하여 향후 소빙기를 포함하는 장기간의 고기후를 복원할 수 있을 것이다.

  • PDF

이소맹출 한 상악 제1대구치의 맹출 유도 (TREATMENT OF ECTOPICALLY ERUPTED MAXILLARY FIRST PERMANENT MOLARS)

  • 윤효진;박호원;이주현;서현우
    • 대한소아치과학회지
    • /
    • 제37권4호
    • /
    • pp.519-525
    • /
    • 2010
  • 이소맹출(ectopic eruption)은 여러 가지 원인들에 의해 치아가 비정상적 위치로 맹출하는 경우를 말하며, 주로 상악 제1대구치, 하악 측절치 그리고 상악 견치에서 발생된다. 이소맹출 한 상악 제1대구치는 정상보다 근심방향으로 맹출하여, 동측상악 제2유구치의 원심협측 치근을 흡수시키며, 결국 상악 제1대구치는 상악 제2유구치 하방에 걸리게 된다. 상악 제1대구치는 저작기능 및 교합에 중요한 역할을 하고 있으므로, 이소맹출 한 상악 제1대구치는 적절한 위치로 이동이 필요하다. 상악 제1대구치를 적절한 위치로 이동하기 위한 치료방법으로는 brass wire 또는 elastic ring을 이용한 separation, 상악 제2유구치의 원심면 삭제, finger spring을 포함한 고정성 또는 가철성 장치, 상악 제2유구치를 발치한 후 공간유지장치 또는 공간회복장치의 이용 등이 있다. 본 증례들은 강릉대학교 치과병원에 내원한 환자들에서 이소맹출 한 상악 제1대구치를 기성금관의 재시적, brass wire의 적용, active plate를 이용하여 적절한 위치로 이동시켜 양호한 교합을 이루었기에 이를 보고하는 바이다.

지식기반형 TBM 터널 세그먼트 라이닝 설계 프로그램의 개발 및 적용 (Development and implementation of a knowledge based TBM tunnel segment lining design program)

  • 정용준;유충식
    • 한국터널지하공간학회 논문집
    • /
    • 제16권3호
    • /
    • pp.321-339
    • /
    • 2014
  • 본 논문에서는 인공신경망 기술을 이용한 TBM 터널 세그먼트 라이닝의 설계 시스템 개발에 관한 내용을 다루었다. 먼저 개발 시스템에 대한 개념 및 개발 과정과 시스템을 구성하는 각 요소기술 및 개별 모듈 개발에 관한 내용을 기술하였다. 본 시스템의 요소기술인 ANN-기반의 세그먼트 라이닝 부재력 예측 시스템에 대해 그 개념과 ANN 학습과정 및 검증과정을 기술하였다. ANN-기반의 세그먼트 라이닝 부재력 예측은 유한요소해석을 토대로 구축한 DB를 ANN을 통해 일반화 한 후 개발된 엔진을 세부 모듈에 접목시켜 별도의 해석 없이 유사 단면 혹은 현장에 적용이 가능하도록 하였다. 또한 해석 대상 단면에 대하여 상용 유한요소해석 프로그램과 연계하여 해석 Input파일의 자동생성이 가능하도록 하였으며 유한요소해석 결과를 통한 단면 검토가 가능하도록 하였다.

지구온난화에 따른 중부 한국 낙엽송의 형성층 생장 예측: 시뮬레이션 모델링 (Global Warming Effects on the Cambial Growth of Larix leptolepis in Central Korea : Predictions from Simulation Modeling)

  • Won-Kyu Park;Eugene Vaganov;Maria Arbatskaya;Jeong-Wook Seo;Je-Su Kim
    • 한국제4기학회지
    • /
    • 제14권1호
    • /
    • pp.57-63
    • /
    • 2000
  • 월악산에 자라는 낙엽송의 연륜세포의 생장에 미치는 온난화의 영향을 시뮬레이션 모델로 예측하였다. 이 모델은 각 연륜의 세포(가도관) 폭 변이를 일 강수량과 기온으로 모사하는 수학식을 사용한다. 세포생장을 제한하는 조건을 기온, 일장, 그리고 계산된 수분수지로 추정한다. 이 모델을 적용한 결과 낙엽송의 계절생장에 가장 큰 영향을 주는 것은 4월과 5월의 토양수분조건과 강수량인 것으로 나타났다. 4~5월 기온 상승은 토양으로부터 수분 증발을 증가시켜 생장을 감소시켰다. 지구온난화(기온 $2^{\circ}C$ 상승)을 모델에 산정하였을 때 생장적기가 짧아졌고 전체 연륜 생장량을 25% 정도 감소시켰다.

  • PDF

고정도.고속 Groove Die Set (High-accuracy and High-speed Groove Die Set)

  • 김건회
    • 한국공작기계학회논문집
    • /
    • 제17권1호
    • /
    • pp.7-15
    • /
    • 2008
  • Currently existing high-accuracy and high-speed die sets used in reciprocal press create scratches at the surface of guide posts, steel balls, and bushes due to vertical movement of balls with point-contacts between inner surface of bushes and guide posts. Consequently, accuracy of the die set and the life span of the metal mold are reduced. However, those scratches could reduce the pre-load of the steel ball. This research designed and developed a groove-type die set which improves life span of the die set by eliminating point-contacts of steel balls with guide posts. The guide post consisted of a steel-ball retainer, a steel-ball retainer stopper, a guide bush, a guide pin, a snap ring, and a spring. The steel-ball retainer has 72 holes with 8 columns of 9 holes in each column. The inner surface of the guide bush was grinded(surface roughness: $Ra\;\\;0.2{\mu}m$, accuracy: $0\;{\sim}\;-0.002mm$) after NC turning and heat treatment. Also, a line of small intermediate pocket was processed inside of the guide bush for lubrication and elimination of foreign materials. Guide grooves of steel balls were processed using a wire EDM(Electrical Discharge Machining) after heat treatment. With such a design of the guide post stated above, loads against steel balls could be dispersed greatly by the line contacts through the guide groove between the guide post and the guide bush, and the life span of the guide post could be expanded semi-permanently.