• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.106-114
• /
• 2003

The pressure ripple in the delivery port is caused by flow ripple, which is induced by variation of pumping chamber volume. The other reason is the reverse flow from the outlet volume produced by pressure difference between pumping chamber and outlet volume, when the pumping chamber is connected with the outlet volume. In this study, a mathematical model is presented for analyzing discharge pressure ripple, which includes vane detachment, cam ring movement , and fluid inertia effects in V-groove in the side plate. From the analysis and experiment, it was found that V-groove on the side plate, coefficient of spring supporting the cam ring, and average discharge pressure are the main factors of discharge pressure ripple in variable displacement vane pump. The theoretical results, provided in this study, were well agreed with experimental results. The analytical model to estimate the magnitude of pressure ripple in this study is expected to be used f3r the optimal design of the variable displacement vane pump.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 춘계학술대회논문집
• /
• pp.19-30
• /
• 1995

The analysis had been already completed to detect forming defects for the forming processes of C/R bearing rings. But some unpredicted problems were found through the experiments. So expert redesigned new forming processes to prevent the problems and new analysis was began according to the new processes to find faults for the processes. The forming processes consist of 1 for the outer ring. 6 inner ring. The thickness of metal sheet used is changed to 1.5mm from 1.6mm. Elasto-plastric finite element method is applied to involve the effect of spring back . The most representative alteration is forming of two predents to assist later forming . Thining and distribution of high residual stress are derived from the results of simulations. It is confirmed that the industry expert agree the possiblilty of defects dervied from the new FEM results.

• 한국정밀공학회지
• /
• 제32권7호
• /
• pp.591-595
• /
• 2015

The roller rig tester for safety performance evaluation of wheel derailment is a test facility which can give the test load condition to the test wheel, similar to the actual dynamic condition in actual running condition. This study describes the evaluation result on the durability of the resilient wheel equipped with the ring damper and the damping material, and installed in the half part of a full scaled bogie in combination with the primary spring when it rotates under the dynamic condition. The evaluation result on durability of resilient wheel after load test of 2 million cycles shows that the safety of wheel is not affected by the applied load in visual inspection and nondestructive test, however, in the bolt used for fastening the ring damper to the wheel the loosening was found. Accordingly the use of self-locking nut and washer is recommended.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.816-818
• /
• 2003

Solenoid actuator's operating speed is affected by magnetic motive force, plunger mass, inductance, return spring constant, and eddy current. Recently, non-magnetic ring is generally used for improving the operational speed, because it is impossible that changing of any specified design factor and stacking of plunger steel. This paper represents the dynamic equations of solenoid actuator, simulations for the response characteristics, analysis of eddy current effect by using the induced time constant. And, we experiment for the operating characteristics in case of non-magnetic ring is exists and not exists in the plunger.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1309-1311
• /
• 2005

The operating speed of PWM controlled high speed magnet is affected by mass of plunger magnetic motive force inductance and return spring It is impossible to change the value of them for the purpose of increasing the speed because these factors are related with each other This paper introduces a speed increasing method using a non magnetic ring which is welded in the middle of magnetic guide tube and also presents the characteristic equations results of FEM analysis for magnetic flux distribution and computer simulation results for the dynamic characteristics of plunger motion And we proved the effect of non magnetic ring by experiments using a prototype

• The Korean Journal of Ecology
• /
• 제19권4호
• /
• pp.285-294
• /
• 1996

Ring-width chronologies of Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.) from two experimental forest plots in Kaunas, Lithuania were developed to study tree growth-climate relationship in different geohydrological conditions using response function analysis. The tree ring-width chronologies of Scots pine ranged from 1883~1987 A.D. and 1864~1989 A.D., and Norway spruce 1838~1987 A.D. and 2870~1989 A.D., respectively. The response function analysis has vividly demonstrated that the growth of Scots pine is favoured by warm summer and Norway spruce by cool and moist summer. Spring temperature has shown direct relationship with tree growth of both the species. There also exists notable intraspecies analogies in growth responses except some minor differences.

• 한국환경복원기술학회지
• /
• 제14권2호
• /
• pp.1-10
• /
• 2011

Six pine trees (Pinus densiflora S. et Z.) at the Euilimji Lake Park in Jecheon were collected to investigate tree ages, growth decline pattern and the years of death. Tree-ring measurement was carried out using the Lintab with a resolution of 0.01mm. Tree age were 80-176 years. Cross-dating between the tree-ring series of each tree and the local chronology from Worak Mountain resulted that four and two trees died in 1998 and 1999, respectively. Three dead trees had only formed earlywood in the outermost tree ring and the others had incomplete latewood. Therefore, it was proven that the former trees died between spring and early summer, whereas the later ones died during late summer and/or autumn. The simultaneous deaths of trees suggest the insect damage and/or drought may be the crucial reason of the death, but frequent reaction woods, which were formed by leaning stem, and scars formed by physical damage may also contribute to the death.

• 한국터널지하공간학회 논문집
• /
• 제17권1호
• /
• pp.49-63
• /
• 2015

본 논문에서는 가상 해저터널의 세그먼트 라이닝의 부재력 평가하여 수심별 세그먼트 최적 두께 산정 및 하중식에 따른 부재력 변화에 관한 내용을 다루었다. 가상 해저터널의 세그먼트 부재력을 평가하기 위해 먼저 다양한 설계 조건을 도출하고 이에 대해 2-Ring Beam 모델을 이용한 구조해석을 수행하여 부재력을 산출하였다. 산출한 부재력을 이용하여 예비 철근 배근을 통해 단면검토를 수행하여 각각의 지층별로 철근 배근을 조절하여 최적 두께를 산정하였다. 검토 결과를 토대로 시공조건에 따른 부재력 변화 경향을 검토하였으며 아울러 다양한 시공조건에 따른 최적 라이닝 단면을 제시하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.286-291
• /
• 2000

The finite element analyses of mechanical rubber components are executed to predict the behavior of deformation and stress distribution in destgn step. The non-linear properties of rubber which are described as strain energy functions are important parameters to design and evaluate rubber components. These are determined by material tests which are tension, compression and shear test. The behaviors of loads-displacements of rubber components such as a roll tubber spring and resilient ring and additional spring for railway suspension system are evaluated by using commercial FEA code. It is shown that the results by FEA simulations are in close agreement with the test results.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.274-279
• /
• 2000

This paper is concerned with the orthotropic problem of diaphragm-type air springs which consist of rubber linings, nylon reinforced rubber composite and bead ring. The analysis is carried out with a finite element method developed to consider the orthotropic properties, geometric nonlinearity using four-node degenerated shell element with reduced integration. Physical stabilization scheme is used to control the zero-energy modes of the element. An inflation analysis and a lateral deformation analysis of an air spring are carried out. Numerical analysis results demonstrate the variation of the outer diameter, the fold height, the vertical force and the lateral force.