• 제목/요약/키워드: Ring Formation

검색결과 460건 처리시간 0.027초

Styrenic Polymers연구(1), Poly(styrene-co-maleic anhydride)의 이미드화와 열적 성질 (Studies on the Styrenic Polymers(1), Imidization of Poly(styrene-co-maleic anhydrides) and Their Thermal Properties)

  • 안태완;박이순;이상수;김기현
    • 공업화학
    • /
    • 제3권1호
    • /
    • pp.179-187
    • /
    • 1992
  • Poly(styrene-co-maleic anhydride), SMA를 DMF 용매에 약 10%(w/w) 용액으로 한 다음 aniline, p-toluidine 및 p-chloroaniline 등으로 maleic anhydride 반복 단위를 imide화 하였다. 이미드화에 있어서 환화 탈수제(cyclodehydration agents)를 사용하였으며 최적 반응조건은 다음과 같았다. (a) 반응온도 : $80^{\circ}C$ (b) 환화 탈수제의 몰비 : SMA내 anhydride/acetic anhydride/sodium acetate/triethyl amino = 1.0/2.0/0.2/1.1. 생성된 imide-modified SMA (SMI) 시료들은 이미드화도가 증가됨에 따라 $T_g$가 증가하였으나 그 변화 정도는 크지 않았다. SMI의 $T_g$는 이미드화에 사용된 아민의 종류에 따라 aniline < p-toluidine < p-chloroaniline의 순으로 $T_g$가 증가하였다.

  • PDF

1992년 5월 속초 근해 와동류의 구조 (Structure of a Warm Eddy off Sogcho in May 1992)

  • LEE Jae Chul;MIN Dug Hong;YU Hong Sun;LEE Hyong Sun;YANG Han Soeb
    • 한국수산과학회지
    • /
    • 제28권3호
    • /
    • pp.354-363
    • /
    • 1995
  • 1992년 1월부터 6월까지의 인공위성 적외선 영상자료를 이용하여 속초 근해에 형성된 와동류의 시간적 변화에 대하여 연구하였고 동년 5월에 그 구조를 관측하였다 와동류의 형성에는 두 가지 종류의 과정이 있는 것으로 나타났는데, 첫 번째로 1월의 영상자료에 의하면 난류의 대량 공급으로 인하여 약 200km 크기의 와동류가 형성되었다. 그 이후에 약간의 변형과 냉각과정을 거쳐서 3월에는 난류의 좁은 필라멘트가 북쪽으로 침투하면서 어느 정도 냉각된 기존의 와동류를 포위함으로써 4-5월에는 반지모양의 와동류로 발달하는 두 번째의 형성과정이었다. 와동류의 내부에는 수온 $10.0-10.4^{\circ}C$의 균질 중층수가 최대 170m의 두께로 존재하였다. 속초 근처 동한난류의 축에서의 유속 약 80cm/sec를 제외하면 나머지 부분의 와동류 내부에는 대체로 30-50cm/sec의 유속분포를 보였고 주수온약층 밑으로는 유속이 급격히 감소하였다.

  • PDF

이온화된 N-source를 사용한 GaN박막의 성장과 특성 (Growth and Properties of GaN Thin-Films Using Ionized N-Source)

  • 김선태;이영주
    • 한국재료학회지
    • /
    • 제8권3호
    • /
    • pp.229-237
    • /
    • 1998
  • 열적으로 이온화된 N과 증기상태의 Ga을 $300~730^{\circ}C$의 온도 범위에서 직접 반응시켜 (001)Si과 (00.1)사파이어 기판 위에 GaN박막의 성장 초기 단계에서는 GaN의 성장률이 증가한 후, 결정 핵을 중심으로 수평방향으로서 성장과 합체에 의하여 성장률의 변화가 일정 값에 달하였다. 이 연구에서 성장한 GaN박막에 대한 XPS분석 결과 낮은 온도에서 성장된 GaN박막은 진공 chamber 내의 산소가 성장된 박막 내에 많이 혼입 되어 있음을 알 수 있었다. 낮은 온도, 짧은 시간 동안 성장된 표면은 Ga덩어리들도 도포 되었다. 그러나, 기판온도와 성장시간이 증가함에 따라 이들은 피라미드 형태의 결정들로 성장된 후 원형고리 형태의 결정으로 합체되었다. 특히 N-소스의 공급이 충분한 경우에는 판상의 결정으로 성장되었다. 20K의 온도에서 측정된 PL스펙트럼에서는 3.32eV와 3.38eV에서 불순물과 관련된 발광이 관찰되었다.

  • PDF

Possibility of Wound Dressing Using Poly(L-leucine)/poly(ethylene glycol)/poly(L-leucine) Triblock Copolymer

  • 김현정;조종수
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1997년도 추계학술대회
    • /
    • pp.249-254
    • /
    • 1997
  • ABA-type block copolymers composed of poly(L-leucine)(PLL) as the A component and poly(ethylene glycol)(PEG) as the B component were synthesized by ring-opening polymerization of L-leucine N-carboxyanhydride initiated by primary amino group located at both ends of PEG chain. A silver sulfadiazine(AgSD)-impregnated wound dressing of sponge-type was prepared by the lyophilization method. Morphological structure of this wound dressing obtained by scanning electron microscopy(SEM) was composed of a dense skin layer and a macroporous inner sponge layer. Equilibrium water content(EWC) of wound dressing was above 10%. It increased with an increased of PEO content in the block copolymer due to the hydrophilicity of PEO. AgSD release from AgSD- impregnated wound dressing in PBS buffer(pH=7.4) was dependent on PEG composition in the block copolymer. Therefore, EWC and release of AgSD can be control by PEG composition. Antibacterial capacity of AgSD-impregnated wound dressing was examined in agar plate against Pseudmonas aeruginosa and Stapplococus aruous. Cytotoxicity of the wound dressing was evaluated by studing mouse skin fibroblast(L929). From the behavior of antimicrobial releasing and the investigation of the suppression of bacterial proliferation, it was supposed that the wound dressing containing antibiotics could protect the wound surfaces from bacterial invasion to suppress the bacterial proliferation effectively. In cytotoxicity observation, cellular damage was reduced by the control led released of AgSD from the LEL sponge matrix of AgSD-medicated wound dressing. In vivo test, granulous tissue formation and wound contraction or the AgSD and DHEA impregnated wound dressing were aster than any other groups.

  • PDF

N-Acetyl-D-Glucosamine Kinase Is a Component of Nuclear Speckles and Paraspeckles

  • Sharif, Syeda Ridita;Lee, HyunSook;Islam, Md. Ariful;Seog, Dae-Hyun;Moon, Il Soo
    • Molecules and Cells
    • /
    • 제38권5호
    • /
    • pp.402-408
    • /
    • 2015
  • Protein O-GlcNAcylation, dictated by cellular UDP-N-acetylglucosamine (UDP-GlcNAc) levels, plays a crucial role in posttranslational modifications. The enzyme GlcNAc kinase (NAGK, E.C. 2.7.1.59) catalyzes the formation of GlcNAc-6-phosphate, which is a major substrate for the biosynthesis of UDP-GlcNAc. Recent studies have revealed the expression of NAGK in different types of cells especially in neuronal dendrites. Here, by immunocytochemistry (ICC) and immunonucleochemistry (INC) of cultured rat hippocampal neurons, HEK293T and GT1-7 cells, we have showed that NAGK immuno-reactive punctae being present in the nucleoplasm colocalized with small nuclear ribonucleoprotein-associated protein N (snRNPN) and p54NRB, which are speckle and paraspeckle markers, respectively. Furthermore, NAGK IR cluster was also found to be colocalized with GTF2H5 (general transcription factor IIH, polypeptide 5) immuno reactive punctae. In addition, relative localization to the ring of nuclear lamin matrix and to GlcNAc, which is highly enriched in nuclear pore complexes, showed that NAGK surrounds the nucleus at the cytoplasmic face of the nuclear outer membrane. By in situ proximity ligation assay (PLA) we confirmed the colocalization of NAGK with snRNPN in the nucleus and in dendrites, while we also verified the interactions of NAGK with p54NRB, and with GTF2H5 in the nucleus. These associations between NAGK with speckle, paraspeckle and general transcription factor suggest its regulatory roles in gene expression.

한국 남해 전남바다목장해역 볼락, Sebastes inermis의 연령과 성장 (Age and growth of the black rockfish, Sebastes inermis, in the Jeonnam marine ranching area in the southern Sea of Korea)

  • 김희용;김상화;허선정;서영일;이선길;고준철;차형기;최문성
    • 수산해양기술연구
    • /
    • 제46권4호
    • /
    • pp.346-357
    • /
    • 2010
  • Characteristics of age and growth of the black rockfish, Sebastes inermis sampled in the Jeonnam Marine Ranching Area (JMRA) around Geumo Islands south of Yeosu were investigated using 642 otoliths from March 2009 to February 2010. The opaque zone was formed in September once a year and hence it was used as an annulus. The parturient period was December to January, and therefore the duration from fertilization to the complete formation of the opaque zone was nineteen months. From the parameters calculated using the average length when the year ring was formed, growth of S. inermis were expressed by von Bertalanffy growth equation as $L_t$=23.267 ($1-e^{-0.4406(t+1.1971)}$) for females and $L_t$=22.030 ($1-e^{-0.5312(t+0.6834)}$) for males when is total length in age t. Through the growth equations, the maximum length was determined as 23.27cm for females and 22.03cm for males and the growth factor as 0.4406/yr and 0.5312/yr, respectively. Finally, the growth of female S. inermis is larger than the one of male S. inermis.

A STUDY OF LYNDS 1299 DARK CLOUD

  • RYU OK-KYUNGI;LEE YOUNGUNG
    • 천문학회지
    • /
    • 제31권2호
    • /
    • pp.161-171
    • /
    • 1998
  • We have mapped about 1.5 square degree regions of Lynds 1299, a well isolated dark cloud in the Outer Galaxy (l = $122^{\circ}$, b = $-7^{\circ}$), in the J = 1- 0 transition of $^{12}CO$ and $^{13}CO$ with the 13.7 m radio telescope at Taeduk Radio Astronomy Observatory (TRAO). We found that there are two velocity components in the molecular emission, at $V_{LSR} = -52 km S^{-1}$ (Cloud A) and -8.8 km $s^{-1}$ (Cloud B), respectively. We have derived physical parameters of two molecular clouds and discussed three different mass estimate techniques. We found that there are large discrepancies between the virial and LTE mass estimates for both clouds. The large virial mass estimate reflects the fact that both are not gravitationally bound. We adopt the mass of $5.6 {\times}10^3 \;M{\bigodot}$ for Cloud A and $1.2{\times}10^3 \;M{\bigodot}$) for Cloud B using conversion factor. Cloud A is found to be associated with a localized star forming site, and its morphology is well matching with that of far-infrared (FIR) dust emission. It shows a clear ring structure with an obvious velocity gradient. We suggest that it may be a remnant cloud from a past episode of massive star formation. Cloud B is found to be unrelated to Cloud A (d = 800 pc) and has no specific velocity structure. The average dust color temperature of the uncontaminated portion of Cloud A is estimated to be 24$\~$27.4 K. The low dust temperature may imply that there is no additional internal heating source within the cloud. The heating of the cloud is probably dominated by the interstellar radiation field except the region directly associated with the new-born B5 star. Overall, the dust properties of Cloud A are similar to those of normal dark cloud even though it does have star forming activity.

  • PDF

14K 화이트-레드골드의 확산접합 공정에 따른 접합 물성 연구 (Bonding Properties of 14K White-Red Gold Alloy by Diffusion Bonding Process)

  • 송정호;송오성
    • 한국재료학회지
    • /
    • 제27권7호
    • /
    • pp.386-391
    • /
    • 2017
  • Using a customized diffusion bonder, we executed diffusion bonding for ring shaped white gold and red gold samples (inner, outer diameter, and thickness were 15.7, 18.7, and 3.0 mm, respectively) at a temperature of $780^{\circ}C$ and applied pressure of 2300 N in a vacuum of $5{\times}10^{-2}$ torr for 180 seconds. Optical microscopy, field emission scanning electron microscopy (FE-SEM), and energy-dispersive X-ray spectroscopy (EDS) were used to investigate the microstructure and compositional changes. The mechanical properties were confirmed by Vickers hardness and shear strength tests. Optical microscopy and FE-SEM confirmed the uniform bonding interface, which was without defects such as micro pores. EDS mapping analysis confirmed that each gold alloy was 14K with the intended composition; Ni and Cu was included as coloring metals in the white and red gold alloys, respectively. The effective diffusion coefficient was estimated based on EDS line scanning. Individual values of Ni and Cu were $5.0{\times}10^{-8}cm^2/s$ and $8.9{\times}10^{-8}cm^2/s$, respectively. These values were as large as those of the melting points due to the accelerated diffusion in this customized diffusion bonder. Vickers hardness results showed that the hardness values of white gold and red gold were 127.83 and 103.04, respectively, due to solid solution strengthening. In addition, the value at the interface indicated no formation of intermetallic compound around the bonding interface. From the shear strength test, the sample was found not to be destroyed at up to 100,000 gf due to the high bonding strength. Therefore, these results confirm the successful diffusion bonding of 14K white-red golds with a diffusion bonder at a low temperature of $780^{\circ}C$ and a short processing time of 180 seconds.

기관전진피판술을 이용한 영구기관 개구협착의 치료 (Management of Permanent Tracheostomal Stenosis by Tracheal Advancement Flap)

  • 최종욱;민헌기;최건;정광윤;김영호;박찬;이병기
    • 대한기관식도과학회지
    • /
    • 제1권1호
    • /
    • pp.136-141
    • /
    • 1995
  • Tracheostomal stenosis after total laryngectomy is a distressing complication which con-tributes significantly to both psychosocial and physical morbidity according to nature and severity in laryngectomee. Sternal stenosis will compromise not only optimal air exchange, crust formation but also the ability to clear tracheobronchial secretion, so pneumonia and atelectasis will develop. Having a number of procedure recommended for correction of such stenosis with limited results. We developed new technique which is based on tracheal advancement flap had been ap-plied to 12 patients, successfully. We think that total or partial tracheal advancement flap technique Is useful for widening the stoma and advantages of this method are following. 1. Simple technique. possible under local anesthesia 2. Healthy tracheal ring facilities width control 3. Less chance of refractory scar stenosis 4. Tracheoesophageal shunt can be constructed after the partial advancement flap.

  • PDF

한우태자의 축추골 몸통과 첫째 척추사이 원반의 발달 (Development of the body of axis and 1st cervical intervertebral disc in the korean native cattle fetus)

  • 이혜란;안동춘;김인식;양홍현;백영기
    • 대한수의학회지
    • /
    • 제37권1호
    • /
    • pp.59-69
    • /
    • 1997
  • The histological and histochemical study of the body of axis and 1st intervertebral disc in the Korean native cattle fetus was attempted to early developmental process. The experimental animals used in this study were collected from fetus of the Korean native cattle ranging from 50mm to 180mm in Crown-Rump length(CR-length). The results were summerized as follows: 1. The ossification centers appeared centrum 1 and centrum 2 of the axis in 110mm CR-length fetus of the Korean native cattle. The centrum 2 was formed little earlier than the centrum 1. 2. The histochemical reactions for collagenous fibers in the axis revealed negative in 50mm CR-length, mild positive in 90mm CR-length, and strong positive in 110mm CR-length, respectively. 3. Dense collagenous fibers were observed in the notochord through the centrum 2, and intervertebral disc developed into cuneiform dorsoventrally, It's contour looks like an annual ring. These fiber bundle arranged lamellar formation. 4. The intervertabral disc of 50mm CR-length fetus was composed mainly mesenchymal cells, and these cell showed aggregation in the central portion. The intervertebral disc of 110mm CR-length fetus was consisted of pricipally fibroblast, and notochordal sheath formed with two layers in the center.

  • PDF