• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 춘계학술대회논문집
• /
• pp.211-223
• /
• 1995

The purpose of the present study is to examine shearing mechanism through rigidplastic finite element analysis. Difficulties arise in simulating shearing process due tothe narrow shear band formation andlackof proper fracture resolve these difficulties by using adaptive mesh generation crriterion. The simulation results are obtained for various punch clearances and these are compared with existing experimental results. It is shown that FEM simulation technique can be used to further understand the shearing mechanism.

• 소성∙가공
• /
• 제19권8호
• /
• pp.494-501
• /
• 2010

The main objective of this study is to examine the sensitivity of calibration curves of FEA of ring compression test to frictional shear factor. Ring compression test has been investigated by measuring dimensional changes at different positions of ring specimen and they include the changes in internal diameter at the middle and top section of the specimen, outer diameter at the middle and top section, surface expansion at the top surface, respectively. Initial ring geometries employed in analysis maintain a fixed ratio of 6 : 3 : 2, i.e. outer diameter : inner diameter : thickness of the ring specimen, which is generally known as 'standard' specimen. A rigid plastic material for different work-hardening characteristics has been modeled for simulations using rigid-plastic finite element code. Analyses have been performed within a definite range of friction as well as over whole range of friction to show different sensitivities to the interfacial friction for different ranges of friction. The results of investigation in this study have been summarized in terms of a dimensionless gradient. It has been known from the results that the dimensional changes at different positions of ring specimen show different linearity and sensitivity to the frictional condition on the contact surface.

• 대한기계학회논문집A
• /
• 제32권8호
• /
• pp.642-653
• /
• 2008

In this paper, we propose a 3-D finite element (FE) analysis model with combined physical behavior and kinematical impact factors for evaluation of residual stress in multi-impact shot peening. The FE model considers both physical behavior of material and characteristics of kinematical impact. The physical parameters include elastic-plastic FE modeling of shot ball, material damping coefficient, dynamic friction coefficient. The kinematical parameters include impact velocity and diameter of shot ball. Multi-impact FE model consists of 3-D symmetry-cell. We can describe a certain repeated area of peened specimen under equibiaxial residual stress by the cell. With the cell model, we investigate the FE peening coverage, dependency on the impact sequence, effect of repeated cycle. The proposed FE model provides converged and unique solution of surface stress, maximum compressive residual stress and deformation depth at four impact positions. Further, in contrast to the rigid and elastic shots, plastically deformable shot produces residual stresses closer to experimental solutions by X-ray diffraction. Consequently, it is confirmed that the FE model with peening factors and plastic shot is valid for multi-shot peening analyses.

• 한국산학기술학회논문지
• /
• 제16권2호
• /
• pp.952-962
• /
• 2015

열간 링 롤링 공법은 열간단조 후의 잠열을 이용하기 때문에 가공 부하가 적고 최종 환형제품에 가까운 제품을 제조하는 장점이 있다. 본 연구에서는 열간 링 롤링 공법에 의한 대형 직경의 환형 부품의 다중형상 링 제조를 목표로 AFDEX2D 및 AFDEX3D/HEXA/RING 시뮬레이터(simulator)를 이용하여 열간 단조공정부터 링 롤링 공정까지 연계된 공정을 유한요소 해석하였다. 또한 링 롤링공정의 유한요소해석 시간을 줄이기 위해 소성변형이 일어나고 있는 영역에서만 요소망을 조밀하게 재구성하는 이중요소 시스템을 적용하였다. 이 유한요소해석 결과를 바탕으로 실제 공정을 설계하고 실험하여 개발된 제품이 품질 규격을 만족하는지를 확인하였다. 또한 링 롤링 실험 완성품을 통하여 부품의 품질수준 및 공정능력을 평가하였다. 그 결과, 개발된 환형 부품은 40%의 투입재료 감소과 최종 제품의 원소재 회수율이 24% 증가하였다. 또한 링 롤링 제품은 내, 외경의 진원도가 0.5mm로 우수하였으며 공정능력 분석결과 외경 Cpk 1.49, 내경 Cpk 0.85를 확보하여 환형 부품의 다중 형상 열간 링 롤링 공정의 최적화를 실현하였다.

• 한국해양공학회지
• /
• 제37권3호
• /
• pp.111-121
• /
• 2023

This paper intends to introduce the applicability of HydroQus to a problem of a tanker collision against a semi-submersible type floating offshore wind turbine (FOWT). HydroQus is a plug-in based on potential flow theory that generates interactive hydroforces in a commercial Finite element analysis (FEA) code Abaqus/Explicit. Frequency response analyses were conducted for a 10MW capacity FOWT to obtain hydrostatic and hydrodynamic constants. The tanker was modeled with rigid elements, while elastic-plastic elements were used for the FOWT. Mooring chains were modeled to implement station keeping ability of the FOWT. Two types of fracture models were considered: constant failure strain model and combined failure strain model HC-LN model composed of Hosford-Coulomb (HC) model & localized necking (LN) model. The damage extents were evaluated by hydroforces and failure strain models. The largest equivalent plastic strain observed in the cases where both restoring force and radiation force were considered. Stress triaxiality and damage indicator analysis showed that the application of HC-LN model was suitable. It could be stated that applications of suitable failure strain model and hydrodynamics into the collision simulations were of importance.

• 대한기계학회논문집A
• /
• 제34권3호
• /
• pp.323-331
• /
• 2010

본 연구에서는 경사충돌시 피닝잔류응력 평가를 위해 3 차원 유한요소해석모델을 제안한다. 단일경사 충돌 해석모델을 이용해 Rayleigh 재료감쇠, 동적마찰 그리고 재료의 변형률 속도에 대한 영향을 알아 보고 이를 통합하여 피닝잔류응력 유일해를 얻는다. 숏볼은 변형을 고려한 소성숏을 포함한 해석 모델이며, 다중숏 경사충돌해석으로 확장한다. 다중경사충돌 해석모델은 단일경사충돌 연구를 통해 결정된 통합된 피닝인자들을 반영했고, 숏볼은 소성숏을 사용하였다. XRD 실험해와 비교시, 강체 및 탄성숏 해석모델에서 얻어진 해석해에 비해 소성숏 모델의 해석해가 실험해에 매우 근접하다. 이로부터 다양한 투사각을 갖는 3 차원 유한요소해석모델의 유효성을 확인하였다. 궁극적으로 제안된 해석모델은 실제 피닝현상을 충분히 반영하기 위한 다중숏 경사충돌해석연구의 초석이 될 것이다.