• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.327-330
• /
• 2002

In this paper, we have analyzed transmission time for WAP over CDMA using turbo code scheme. In order for SAR to improve the transfer capability, the transmission of messages have been simulated using a fragmentation that begins with the total package and incremental fragmentation for each layer using the WTP to define tile resultant packet size and the level of fragmentation for each proceeding layer. This turbo code scheme decreases transmission lime of RLP baseband packets. From the results, we arc able to obtain packet transmission time and optimal WTP packet size for WAP over CDMA in a Rician fading channel.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.1
• /
• pp.44-53
• /
• 1999

In this paper, we propose a pilot based time-averaging channel estimation method and analyze error performances for efficient transmission of OFDM(Orthogonal Frequency Division Multiplexing) in multipath fading environment. Frequency domain channel estimations have been used in OFDM systems to compensate signal distortions due to fading on each subcarrier. The frequency domain estimation scheme uses scattered pilot to estimate channel response by simple interpolation. This implies that the estimated channel response includes signal distortions due to the noise. In this paper, we propose time-averaged channel estimation method to remove the distortion by noise. The proposed scheme can effectively remove noise components by taking time-average of the estimated channel response after estimating frequency domain channel. The computer simulations were performed to evaluate the performance of the proposed channel estimator. For the Rician channel, we compared the performance of the proposed method to that of a conventional one using channel estimation by gaussian interpolation when SER(Symbol Error Rate) = $10^{-4}$, and compared to perfect channel estimation case. The proposed method showed differences of 0.07 dB, 0.6 dB compared to perfect channel estimation and improvements of 1.7 dB, 1.9 dB for 16 QAM, 64 QAM respectively compared to conventional method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5A
• /
• pp.397-401
• /
• 2005

A different alternative method for simulating bit error rate(BER) performance of Satellite Digital Multimedia Broadcasting(DMB) in tunnel environments is presented. The method based on a channel model obtained by ray-tracing is able to support BER estimation over the channel presents arbitrary statistics that are difficult to fit to an analytic expression. The BER performance for System E over the tunnel fading channel that obtained by ray-tracing is predicted by the monte-carlo method. It can be observed that the BER performance for a straight tunnel channel is better than that for a line-of-sight(LOS) area in curved tunnel. Also, the BER performance for LOS areas in a curved tunnel outperforms that for non-line-of-sight(NLOS) areas in a curved tunnel. The BER performances for straight, curved LOS and curved NLOS tunnel channels are better than that for a Rayleigh channel(K=0) and less than that for a Rician channel with K=3. Moreover, for BER=10-3, it can be seen that there is approximately a $1{\sim}1.5\;dB$ difference between those three types of tunnel channels and a Rayleigh channel.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.11
• /
• pp.19-29
• /
• 2001

The Pan-European Digital Audio Broadcasting(DAH) system's performance is characterized and improved with the aid of turbo codec. From the fact that the first bit among the four coded bits at the RCPC coding defined in the Eureka 147 DAD system is not. punctured and always transmitted, this paper proposes a new turbo coded DAB system model that replaces the existing RCPC codec by a turbo codec without modifying the puncturing procedure and puncturing vectors defined in the standard DAB system for compatibility. The performance of a new system is compared to that of the conventional system under the Rician fading channel and the Rayleigh fading channel in conjunction with DAD transmission mode I and III suitable for the terrestrial single frequency network and satellite broadcasting.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.1
• /
• pp.42-51
• /
• 1997

The satellite channel with a line-of-sight signal component is modeled by a shadowed Rician fading channel. We adopt a direct-sequence / code division multiple access (DS / CDMA), which has the advantage to suppress the multipath effect and increase the user capacity. The performance which is evaluated by bit error probability is subjected to the influence of branch number, multi-user number, and spreading code-length. As the result of the analysis, performance advance is achieved with multi-user number decreasing, number of brnaches increasing, and spreading code-length increasing as chip duration is constant. To use both of diversity combining scheme and channel coding is more efficient for performance improvement than the case using diversity combining scheme only. The use of BCH coding and convolutional coding shows better consequence than Hamming coding. Totally, the performance degradation for heavy shadowing is much larger than that for light and average shadowing as heavy shadowing decreases LOS signal.

• Journal of Digital Convergence
• /
• v.11 no.7
• /
• pp.201-207
• /
• 2013

The chirp signaling has been mainly used in radar systems due to its good correlation characteristics, and nowadays it is applied to real time locating system(RTLS). The RTLS with chirp signaling was chosen as a standard such as ISO/IEC 24730-5 and IEEE 802.15.4a. In this paper, the performance of a real time locating system with chirp signaling was evaluated and simulated with relative distance error rates. We considered three cases of S/I = -30[dB], -20[dB], and -10[dB] with Rician factor K=10 and K=20. The performance was enhanced with K factor improvement by 25%, 27% and 50% for respective three cases of S/I. As results, in case of S/I < -20[dB], the minimum signal power is required for performance improvement even though the line of sight component is helpful. And also, in case of S/I ${\geq}$ -20[dB], as the line of sight component is stronger the better performance is obtained.

• Journal of Advanced Navigation Technology
• /
• v.5 no.2
• /
• pp.158-164
• /
• 2001

We presented a channel model for the inter vehicle radio link including the reflection from the road surface, side road vehicle and concrete wall. Then we theoretically derived the path loss and delay profile characteristics using the Ray tracing method efficiently analyzing millimeter wave or optic wave. Finally, we shown the improvement of propagation characteristics by diversity techniques, BCH coding and convolution coding techniques. At the result, MRC diversity techniques and BCH coding can't obtained PER = $10^{-6}$ which is considered to be data service criterion. But, we knew that Packet Error Rate Characteristic can obtained PER = $10^{-6}$, which is considered to be data service criterion, when convolution coding scheme are adopted in Rician fading.

• Journal of Advanced Navigation Technology
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2006

In this paper, we have analyzed transmission time for WAP over CDMA using turbo code scheme. In order for SAR to improve the transfer capability, the transmission of messages have been simulated using a fragmentation that begins with the total package and incremental fragmentation for each layer using the WTP to define the resultant packet size and the level of fragmentation for each proceeding layer. This turbo code scheme decreases transmission time of RLP baseband packets by sending packets. From the results, we were able to obtain packet transmission time and optimal WTP packet size for WAP over CDMA in a Rician fading channel.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.4
• /
• pp.212-220
• /
• 2014

The current cellular communications are optimized for low mobility users, meaning that their performance is degraded at high speed. Therefore, passengers in a high-speed train experience very poor radio link quality due to the significantly large number of simultaneous handovers. In addition, wireless data traffic is expanding exponentially in trains, subways and buses due to the widespread use of smartphones and mobile devices. To solve the inherent problem of cellular communication networks and meet the growing traffic demand, this paper proposes the mobile hotspot network of a millimeter-wave communication system as a mobile wireless backhaul. This paper describes the physical layer design of uplink and downlink in the proposed system, and the performances of uplink and downlink are evaluated under Rician fading channel conditions. The implemented baseband prototype of the proposed millimeter-wave communication modem is presented. This system can provide a Gbps data rate service in high-speed trains carrying hundreds of wireless Internet users.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.2
• /
• pp.286-293
• /
• 2000

This paper treats performance analysis and improvement of DSRC physical layer which is discussed for standardization at the ISO TC-204 WG-15. DSRC is a short range wireless communication for which distance is less than 100m between RSU and O BE, since DSRC requires cheap and simple modulation technique, ASK is being developed as standard modulation system among PSK, FSK and ASK in our country. This paper analyzes the performance of DSRC physical layer system which is at the first stage of development under Rician fading channel, more sepcifically, the validity of the system and the performance limitations are shown. Both equalizer and antenna diversity techniques are simulated to improve the ASK system performance.