• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.1
• /
• pp.51-56
• /
• 1996

In this Experiment three wether male Matou goats (♂), all fitted with permanent rumen fistulae, were used to study the rumen degradabilities (incubation time 48h) of dry matter (DM), neutral detergent fibre (NDF), acid detergent fibre (ADF), acid detergent ligin (ADL), cellulose (CEL) and hemicellulose (HC) and their contents of wheat and rice straws were determined for the different morphological fractions and segments. The results showed that the variation of different fractions for wheat and rice straw is the true resources of their nutritive value variation and the cell wall contents of wheat and rice straw are also obviously different. The rumen degradabilities of different straw fibre are significantly different (p<0.01), mean while the effect of straw variety is also significant (p<0.05). The aim was to set up a foundation for studying the rumen degradation of the roughage resources.

• Journal of Plant Biology
• /
• v.13 no.1
• /
• pp.1-12
• /
• 1970

The Nongkwang variety was sown directly in the field by the three methods of dibbling, drill seeding and broad-casting in non-, low- and high-salty areas, and compared with the growth of transplanted rice in each areas. The yield of rough rice was increased remarkably by direct sowing when compared with that produced by transplanting inboth salty areas, but in non-salty area, the former was decreased significantly. There was no significant difference in the yields of rough rice resulting from three seedling methods of direct sowing in each area. The direct sowing method was predominated in number of panicle, weight of panicle, ratio of matured grains, milling recovery percentage, and straw weight in both salty areas, and dicreased in panicle weight and ratio of matured grain in nonsalty area.

• Journal of Plant Biology
• /
• v.14 no.3
• /
• pp.60-65
• /
• 1971

In order to observe the factors affecting light utilization efficiency in the canopy of a rice crop grown in reclaimed saline areas in Korea, 22 varieties of rice were cultured at the average salt concentration of 6.05mmhos/cm $25^{\circ}C$, (0.39%) in saline soils and non-saline silty loam soils. The inhibition of tillering ability by salt damage at the maximum tillering stage was greater than to growth in height. A significant direct correlation was observed between both ratios and salt concentration with each variety. In the salty areas the length of the flag leaf of the maturing stage showed a positive correlation with the production of rough rice while other living leaf showed a negative correlation. LAI of maturing stage was less in the salty area than in the non-salty area, while the former showed higher ratio in net assimilation and translocation to head with greater RGR before and after the heading stage.

• Journal of Biosystems Engineering
• /
• v.38 no.2
• /
• pp.103-112
• /
• 2013

Background: The Korean government launched a project in 2008, where the amount of rice used as raw ingredient in rice-based foods in 2012 was planned to increase up to 10% (470,000 ton) of the total rice production through developing various new rice-based processed foods and their commercial manufacturing technology. Among the four major rice-based processed foods, rice cakes and noodles need rice flour as their main raw ingredient. Technology in rice flour utilization and manufacturing is far behind than the technology pertinent to wheat flour in many subject areas. Purpose: This review aims to provide information on rice flour utilization and manufacturing with some fundamental subjects in the area of size reduction. Results: A variety of food items including bread, noodle, cake, cookie, muffin, pre-mix, beverage, vinegar, surimi, and artificial meat have found rice flour as their raw ingredient. Rice bread made out of 100% rice flour has been developed and is now sold in retail stores. Various noodle products made from rice flour are also on the market. Issues on product definition and labeling regulation about rice flour content of the products were explored. Generalized grinding equations available in the literature were seldom used in practice; instead, it has been a general practice to develop empirical equations from test milling data. Introductory remarks on three popular particle size measurement methods (sieving, Coulter counter, light diffraction) were explained. Mathematical expressions frequently used to describe particle size distribution and to correlate cumulative quantity of particles with particle size were represented. Milling methods used in producing rice flour were described along with their advantages and disadvantages. Because of their profound effect on functional properties of the rice flour, four rice flour milling equipments used at both laboratory experiments and commercial manufacturing plants were discussed.

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.47-63
• /
• 1978

This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.33-36
• /
• 2005

In order to find out better cultivation practices in mid-mountainous area to produce high quality rice, an experiment involving four transplanting times and four varieties was carried out, during past three years $(2002\~2004)$. There was no significantly different on palatability of rice between transplanting time, but an interaction effect was between transplanting time and variety, The palatability of milled rice of Sangmibyeo, Hwayongbyeo and Junambyeo transplanted at May 10th were higher than Samcheonbyeo. The palatability of milled rice grown by May 20th day's transplanted, Sangmibyeo and Junambyeo were higher than Samcheonbyeo. The palatability of milled rice grown by May 30th day's trans-planted, Sangmibyeo and Hwayongbyeo were higher than Samcheonbyeo and Junambyeo. And the palatability of milled rice grown by June 9th day's transplanted, Sangmibyeo and Samcheonbyeo were higher than Hwayongbyeo and Junambyeo. It can infer that Sangmibyeo is one of the best option over the transplanting times in term of palatability, Amylose content of milled rice was showed without a significant difference between transplanting time, but there was an interaction effect between transplanting time and variety. The amylose content of grown by May 20th day's transplanted, Sangmibyeo and Samcheonbyeo were lower than Junambyeo. The amylose content of milled rice grown by June 9th day's transplanted, Sangmibyeo and Samcheonbyeo were lower than Hwayongbyeo and Junambyeo. And the amylose content of milled rice grown by May 10th day's and May 30th day's transplanted, was showed without a significant difference between variety. The protein content of milled rice grown by later season transplanted was lower than grown by earlier, The head rice yield wasn't different significantly between the treatment of transplanting times and varieties. But the yield of milled rice grown by transplanted at May 20th day was high most in between the treatment of transplanting time. In a conclusion gathering all above the results, 20th May day's transplanting time and Sangmibyeo was one of the best option for producing high quality rice among the treatments in considering with head rice yield, palatability, amylose${\cdot}$protein content and productivity, at Mid-mountainous area.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.112-112
• /
• 2017

Rice blast caused by Magnaporthe oryzae is one of the most serious diseases that affect the quantity and quality of rice production. The use of resistant rice varieties would be the most effective way to control the rice blast. However R gene incorporation into the rice variety takes time and pathogen could overcome the R gene effects after for a while. For monitoring the rice blast resistance gene distribution in Korean varieties, the four major blast resistance genes against M. oryzae were screened in a number of Korean rice varieties using molecular markers. Of the 120 rice varieties tested, 40 were found to contain the Pi-5 gene, 25 for the Pi-9 gene, 79 for Pi-b and 40 for the Pi-ta gene. None of these rice varieties includes tested 4 R genes. 3 R genes combination, Pi-5/Pi-9/Pi-b, Pi-5, Pi-9.Pi-ta, or Pi-9/Pi-b/Pi-ta were found in 12 varieties, the rice blast disease severity were showed as resistant in the rice verities containing Pi-9/Pi-b/Pi-ta R genes combination, respectively. Also pathogenic diversity of M. oryzae isolates collected in the rice field from 2004 to 2015 in rice field in Korea were analyzed using rice blast monogenic lines, each harboring a single blast resistance gene. Compatibility of blast isolates against rice blast monogenic lines carrying the resistance genes Pi5, Pi9, Pib, and Piz showed dynamic changes by year. It indicates that pathogen has high evolutionary potential adapted host resistances to increase fitness and would lead to rice blast resistance bred into the cultivar becoming ineffective eventually.

• Journal of Nutrition and Health
• /
• v.38 no.8
• /
• pp.613-625
• /
• 2005

This study was designed to evaluate impact of kinds of dietary grain and dietary lipid level on the glucose metabolism and antithrombogenic capacity in obesity induced rats. Total of 80 Sprague-Dawley male rats were raised for one month with control diet containing $50\%$ (w/w) well-milled rice powder and $20\%$(w/w) of dietary lipids. The rats were blocked into 8 groups and raised for two months with diets containing well-milled rice, brown rice, black rice, or glutinous barley powder and 8 or $20\%$(w/w) of dietary lipids. The contents of total dietary fiber in experimental grains were in following order; glutinous barley > black rice > brown rice > well-milled rice. Weekly food intake were lower in glutinous barley group among all experimental groups. Body weight gain was high in high level of fat groups ($50\%$w/w) than medium level of fat groups ($8\%$ w/w). Plasma glucose concentration was not different significantly in each groups. But brown rice group was a little lower than others. Plasma insulin concentration was lower in black rice and glutinous barley group than rice group. Plasma glucagon concentration did not differ significantly among all experimental groups. Hexokinase activities in skeletal muscle are different significantly according to level of dietary fat and grain variety factors. Brown rice group was significantly highest among all experimental groups in hexokinase activity. Plasma $TXB_2$ concentrations in black rice and glutinous barley groups were lower as compared to rice and brown rice groups. Plasma 6-keto-$PGF_{1\alpha}$ concentrations in glutinous barley group was higher as compared to others. In conclusion brown rice has a little lowering effect glucose concentration. Black rice and glutinous barley intakes enhance antithromboenic capacity. It is suggested that the intakes of mixed gains are recommend.

• Korean Journal of Food Science and Technology
• /
• v.48 no.5
• /
• pp.492-495
• /
• 2016

This study aimed at investigating the influence of different rice varieties (Palbangmi, Saegoami, Mimyeon, Dasan-1, Hanarm, Boramchan, and Baegjinju) on the preparation process of rice cookies. Rice grains were pulverized by dry milling and subsequently screened using a 100-mesh sieve. Dasan-1, Hanarm, and Palbangmi flours showed low water absorption index (WAI) compared to other rice flours. The spread ratios of the cookies prepared with Dasan-1, Hanarm, and Palbangmi flours reached higher values than those obtained with other rice varieties. As a result, the hardness of the cookies prepared with Dasan-1, Hanarm, and Palbangmi flours was relatively low. On the contrary, cookies prepared with Saegoami, Boramchan, and Baegjinju flours showed inadequate qualities because they contained relatively high levels of damaged starch, which increased water absorption in the cookie dough. The WAI value of rice flour could be the most important indicator to determine the quality of rice cookies.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.5
• /
• pp.684-689
• /
• 1995

The molecular structure of rice starch was investigated using Korean rice[3 varieties of Japonica type and 3 varieties of Tongi type(Japonica-Indica breeding type)]. The λmax of iodine complex and inherent viscosity of Japonica type were higher than those of Tongil type. $\beta$-Amylolysis limit of the starches was not different between the two rice types. In the distribution of molecular weight of rice starch, the molecular size of amylose and amylopectin for Japonica type were smaller than those for Tongil type. The chain of rice starch distributed F1 of above DP 55, F2 of DP 40~50 and F3 of DP 15~20, and the ratio of F3 against F2 for Japonica type was higher than that of Tongil type. The results suggest that rice of Japonica and Tongil type was different molecular structure of starch.