• Journal of the Korean Graphic Arts Communication Society
• /
• v.24 no.1
• /
• pp.1-12
• /
• 2006

The rheological characteristics of an ink relate to its performance on the press and to the printing quality such as ink stability, transfer characteristics, mottle, squash, misting, dot gain, and so on. For lithographic print, the emulsification of ink is an important factor to determine the product. And also the rheological characteristics of the emulsified ink should be investigated. Thus, in this study, the effects of the changing molecular weight of rosin modified phenolic resin on the water-pickup ratio of neat inks were studied. And then rheological properties of neat inks and emulsified inks with changing molecular weight of rosin modified phenolic resin were analyzed by using rotational rheometer.

• Journal of Pharmaceutical Investigation
• /
• v.15 no.3
• /
• pp.121-129
• /
• 1985

Influences of various waxes on the consistency of cream was investigated by inspections through microscope, rheometer and sensory test. Fatty acids, higher fatty alcohols, hydrocarbons, and some of natural waxes were used in this experiment. Most above waxes showed good state of emulsion at low concentration, but at higher concentration $(7.0{\sim}8.0%)$, they showed not only an unstable emulsion state but also a critical point of content in consistency. At this critical point of content, the consistency of w/o type cream was increased irregularly. So, it could be identified that consistency of a w/o type cream was strongly dependent on kinds and contents of waxes in continuous phase.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.4
• /
• pp.109-117
• /
• 1992

Mixing of ceramic-binder system was investigated experimentally and theoretically for application to Ceramic Injection Molding. Polypropylene, stearic acid, and paraffin wax were selected as the binder system, and silicon nitride fine powders were selected as the ceramic material. Single screw ectruder was employed as the mixing equipment. Theoretical analysis was performed to investigate the mixedness of mixture quantitatively. The analysis predicted average residence time average total strain, and average shear stress as a function of screw speed for mixtures of different volume fraction. Qualitative mixedness of mixture and characteristics of mixing were investigated by using SEM and EPMA. In addition, rheological properties of the mixture were investigated by using a capillary rheometer to examine possibility of injection molding.

• The Korean Journal of Food And Nutrition
• /
• v.20 no.2
• /
• pp.164-172
• /
• 2007

The purpose of this study was to investigate the properties of yellow layer cake made with bamboo leaf powder. Physical properties of the medium and cake flour with bamboo leaf powder were tested by falling number, farinogram, alveogram and after making yellow layer cake, which were tested by rheometer and water activity etc. We found that falling numbers increased with addition of bamboo leaf powder and adding bamboo leaf powder to the flour decreased peak viscosity, holding strength, final viscosity etc. The p value of the alveogram increased for the flour containing bamboo leaf powder increased, but development time and stability decreased. The water activity of the yellow layer cakes made with bamboo leaf powder decreased during storage, but they did not show significant differences. The results of the sensory test showed that the 3% of addition of bamboo leaf powder had the best scores.

• The Korean Journal of Rheology
• /
• v.9 no.1
• /
• pp.40-46
• /
• 1997

폴리이소부틸렌(PIB)/폴리부텐(PB) 고분자 용액에 분산된 입자의 영향을 살펴보기위 해 제조된 kaolinite/PIB/PB 용액에 대한 Weissenberg 효과와 유변학적 물성을 조사하였다. Kaolinite 분산 PIB/PB 고분자 용액도 2차 유체로 간주될수 있음이 발견되었으며 느린 변형 속도에서 2차유체로 간주되는 입자 분산 고분자 용액에 대한 막대상승 실험에서 얻는 고분 자 용액의 탄성 발현에 의한 상승높이에 비례하는 막대오름상수 $\beta$값으로부터 유변학적 특 서치들을 구할수 있었다. 이러한 막대오름상수 $\beta$값은 PIB/PB 및 kaolinite/PIB/PB계에서 용매 점도, 입자 농도와 PIB의 농도가 높을수록 증가하는 반면 온도에는 반비례함을 보이는 데 고분자 용융체에서와는 달리 입자 분산고분자 용액의 경우 입자의 농도가 증가함에 따라 탄성도 증가하는 특징적 거동을 관찰하였다. 한편 Physica MC-120과 RMS 800 Rheometer 를 사용하여 PIB 고분자 용액의 유변학적 물성들을 측정하였으며 2차 유체 구성방정식에 근거하여 얻어지는 유변학적 특성치들과 비교하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.1 s.106
• /
• pp.3-11
• /
• 2006

This paper presents a new approach for hysteresis modeling of a magnetorheological (MR) fluid. The field-dependent hysteresis of MR fluid is investigated using the Preisach model. The commercial MR product (MRF-132LD, Lord Corporation) is employed. Its field-dependent shear stress is then obtained using a rheometer (MCR 300, Physica). In order to show the applicability of the Preisach model to the MR fluid, two significant properties; the minor loop property and the wiping-out. property are experimentally examined. Subsequently, the Preisach model for the MR fluid is identified using experimental first order descending (FOD) curves in discrete manner. The effectiveness of the identified hysteresis model is verified in the time domain by comparing the predicted field-dependent shear stress with the measured one. In addition, the hysteresis model proposed in this work is compared to Bingham model.

• Korean Journal of Materials Research
• /
• v.4 no.2
• /
• pp.213-218
• /
• 1994

제올라이트 분말을 기본재료로 하는 전기유변유체의 전기 및 유변학적 특성이 연구되었다. 전기장 인가시 높은 한계응력을 얻기 위하여 비교적 유전상슈가 큰 5종류의 유전유체를 선택하여 제올라이트 분말과 혼합하여 전기유변유체를 준비하였다. Couette형 rheometer를 이용하여 유변유체의 한계응력을 인가된 전기장 및 온도의 함수로서 측정하였다. 이중 chlorinate hydrocabon oil과 제올라이트 분말을 혼합한 전기유변유체의 한계응력은 6KPa(E=4KV/mm, T=$25^{\circ}C$)로서 최대치를 기록하였다. 측정된 한계응력은 온도가 상승하면 점차 감소하는 반면 전류밀도는 온도에 따라 증가하였다. 전류밀도에 대한 Arrhenius 그라프에서 전기전도에 대한 활성화 에너지는 약 0.7eV였으며 이는 제올라이트 분말에 포함된 $Na^{+}$ 이온의 확산에 기인하는 것으로 분석되었다.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.3
• /
• pp.1-16
• /
• 2011

In these days, according to increased environmental regulations, to reduce the VOC content in paints and inks efforts are now in progress. A lot of research have progressed hydrocarbon solvents substitute with vegetable oil or ester in the printing ink but it is restricted to use vegetable oil in the inks because of high molecular weight and viscosity. Oil ester currently developed for printing inks still have some drawbacks, but overall the printability and print quality when using ester than hydrocarbon solvents are showing good results. Thus, in this paper, I studied about the properties variation of the varnish and inks according to vegetable ester, after I reacted vegetable ester using the vegetable fatty acid and ethyl alcohol, butyl alcohol. The compared in order of average molecular weight by the GPC method, rheological properties were found by rotational rheometer, and emulsion behavior were compared by high speed emulsification tester.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.2
• /
• pp.1-13
• /
• 2007

The rheological properties of an ink relate to its performance on the press and to the printing quality. So it is necessary to analyze the relationship between printability and the rheological properties of ink. Transfer rate of ink is one of the important factor deciding print quality. And it is concerned with rheological properties of ink. Thus, in this study, according to the molecular weight of rosin modified phenolic resin the rheological properties of ink were measured by rotational rheometer and then transfer equation of ink, density and gloss were measured in order to examine the printability of ink.

• Journal of Pharmaceutical Investigation
• /
• v.18 no.1
• /
• pp.9-13
• /
• 1988

Physicochemical properties of oil in water microemulsions containing soybean oil and egg phosphatide were observed for 3 weeks under the storage condition of $4^{\circ}C$ refrigerator. Changes in major fatty acid content, particle size distribution, rheogram, acid value and pH value were measured by gas chromatograph, laser particle sizer, Coulter counter and rheometer. From above experiments following conclusions were obtained; 1) Mean particle diameter was shifted from 240 to 266mm. 2) No significant changes were observed in the content of major fatty acids of soybean oil, rheogram, acid value and pH value.