• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.45-50
• /
• 2006

A satellite and ground stations which are developed in a program are tested whether the interface between the satellite and ground is well established before satellite operations. These compatibility tests are performed when the satellite is connected with the ground stations after all satellite and ground stations requirements are verified. The content of the RF compatibility test is to check whether the interface requirements which are described on the Interface Control Document are well developed. During the early operation phase and tentative contingency operations of the satellite, KARI ground station uses other oversea ground stations which are located worldwide according to contract between the KARI and the contractor. Since oversea ground stations were not developed for the designated space program, system integrator should check whether the oversea ground stations are satisfied with interface requirements. Using the RF suitcase, RF interface and the content of RF communication can directly be verified during RF compatibility test on oversea ground station without KARI ground station's support. The RF compatibility test using RF suitcase was performed oversea ground stations as well as KARI ground station located on Korea. The content of RF compatibility test was standardized in order to be used at any oversea ground stations, especially fitted for the operations concept of launch and early operations phase. The test content would be RF characteristics, protocol, command loop test, telemetry loop test, and ground station interface test.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.177-177
• /
• 2012

진공을 기초로 한 다양한 반도체 식각 공정에서 RF bias가 결합된 유도 결합 플라즈마 소스는 널리 사용되고 있다. 하지만, 대부분의 연구는 RF bias에 의한 자기 바이어스 효과에만 한정되어 있으며, 공정 결과와 소자 품질에 결정적인 역할을 하는 플라즈마 변수들(전자 온도, 플라즈마 밀도)과 RF bias의 상관관계에 대한 연구는 거의 없는 실정이다. 본 연구에서는 RF bias가 플라즈마 변수에 미치는 영향과 비충돌 전자 가열 메커니즘의 실험적 증거에 관한 연구를 진행하였다. 플라즈마 밀도는 RF bias에 의하여 감소 또는 증가하였으며, 이러한 결과는 Fluid global model에 의한 계산과 잘 일치하는 결과를 보였다. 전자 온도는 RF bias에 의하여 증가하였으며, 적은 RF bias 전력에서는 플라즈마 전위에 갇혀있는 낮은 에너지 그룹의 전자들의 가열이 주가 되었으나, 큰 RF bias 전력에서는 높은 에너지 그룹의 전자들의 가열이 주가 됨을 관찰하였다. 이는 높은 에너지 그룹의 전자 가열 메커니즘이 anomalous skin effect에서 collisionless sheath heating으로 전이되는 것을 나타내며, bounce resonance heating이 RF bias의 전자가열에 중요한 역할을 함을 보여주는 실험적 근거이다. 플라즈마 밀도의 공간 분포는 RF bias의 인가에 의하여 더욱 균일함을 보였으며, 이는 (electro-static and electro-magnetic) edge effect에 의한 영향으로 해석될 수 있다. 이러한 RF bias와 플라즈마 변수들의 상관관계 및 전자 가열 메커니즘에 대한 연구는 방전 특성의 물리적 이해뿐만 아니라, 반도체 식각 공정에서 소자 품질 및 공정 개선을 위한 최적의 방전 조건 도출과 외부 변수 제어에 큰 도움을 주리라 예상된다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.10
• /
• pp.994-1000
• /
• 2013

Conventional MIMO system is required to a number of RF chains as much as a number of antennas. If the number of antennas increased then the number of RF chains increased. Therefore, it is difficult to apply conventional MIMO system to mobile terminals with limited power. In this paper, we propose a TDM(time division multiplexing)-based single RF chain MIMO system. The outcome shows that performance of the proposed system is similar to conventional MIMO system using multiple RF chains when STO is corrected by phase angle estimation and the synchronizing signal of received signal. Therefore, it is possible to implement the MIMO-OFDM system of low power and complexity through a single RF chain.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.23 no.1
• /
• pp.55-59
• /
• 1978

This study was carried out to investigate the sea sonal changes of the contents of inhibitors in leaves and fruits of Ginseng plant during ripening. Three kinds of inhibitors in leaves and all parts of fruit, i.e., seed, sarcocarp and endocarp were recognized at the Rf 0.1, 0.4-0.6 and 0.8-1.0 zones by the bioassay of lettuce seed germination. Among them, the level of the inhibitor at the Rf 0.4-0.6 zone in leaf and seed increased most significantly in accordance with fruit ripening. The activities of three inhibitors found in endocarp gradually decreased during ripening.

• Journal of Korea Multimedia Society
• /
• v.10 no.4
• /
• pp.548-558
• /
• 2007

This paper presents a method of location sensing of mobile objects using RF devices. By analyzing signal strengths between a certain number of fixed RF devices and a moving RF device, we can recognize the location of a moving object in real time. Firstly, signal strength values between RF devices are gathered, and then the values are normalized and constructed as a model feature vector for specific location. A number of model patterns are acquired and registered for all of the location which we want to recognize. For location sensing, signal strength information for an arbitrary moving RF device is acquired and compared with model feature vectors registered previously. In this case, distance value is calculated and the moving RF device is classified as one of the known model patterns. Experimental results show that our methods have performed the location sensing successfully with 100% rate of recognition when the number of fixed RF devices is 10 or more than 12. In terms of cost and applicability, experimental results seem to be very encouraging.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.8
• /
• pp.79-85
• /
• 2004

In this paper, the RF-ID system for ubiquitous tagging applications has been designed, fabricated and analysed. The RF-ID System consists of passive RF-ID Tag and Reader. The passive RF-ID tag consists of rectifier using zero-bias schottky diode which converts RF power into DC power, ID chip, ASK modulator using bipolar transistor and slot loop antenna. We suggest an ASK undulation method using a bipolar transistor to compensate the disadvantage of the conventional PIN diode, which needs large current Also, the slot loop antenna with wider bandwidth than that of the conventional patch antenna is suggested The RF-ID reader consist of patch array antenna, Tx/Rx part and ASK demodulator. We have designed the RF-ID System using EM and circuit simulation tools. According to the measured results, The power level of modulation signal at 1 m from passive RF-ID Tag is -46.76 dBm and frequency of it is 57.2 KHz. The transmitting power of RF-ID reader was 500 mW

• Journal of the Microelectronics and Packaging Society
• /
• v.4 no.2
• /
• pp.79-83
• /
• 1997

본 연구에서는 휴대용 전화기 및 무선 LAN 의 핵심부품인 RF-Switch Module의 초소형화 설계기술, 표면실장기술, 고주파설계기술, 소형화 SMD기술, Test 기술 및 RF-Switch Module 활용기술 등을 개발하였으며 RF-Switch Module의 설계기반 마련 및 대외 경쟁력 있는 RF-Switch Module의 초소형화 기술을 확보하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3A
• /
• pp.319-323
• /
• 2007

In this paper, the automatic precision measurement of RF voltage has been done using the power and impedance standards [1] in the frequency range of 50 to 1000 MHz. A coaxial microcalorimeter and an automatic network analyzer were used for the determination of the RF-DC differences and the total uncertainty is about 1.0 %. A HP computer, a commodore computer and IEEE-488 interface bus were used for measuring the effective efficiency of thermistor mount and the RF-DC difference of thermal voltage converter, All processes of measurement were accomplished by self-developed program automatically.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.9
• /
• pp.1660-1668
• /
• 2008

The WiBro was adopted to the 3G international standard. By the change of specification from Wave 1 to Wave 2, MIMO technology is applied in order to increase the speed of downlink. By MIMO the RF part of WiBro base station is increased to 2 Tx paths. Therefore, the size of RF part is bigger and material cost is increased. For reducing these demerits, the RF part which is consisted of PA, LNA, and TDD switch is designed to one complex RF unit. Also, the experimental results of the RF unit have been discussed. Since the complex RF unit is more compact than the RF part of Wave 1 base station, it can be used as the RF part of Wave 2 base station with 2T/2R MIMO.

• Korean Journal of Materials Research
• /
• v.7 no.1
• /
• pp.27-32
• /
• 1997

본 연구에서는 고밀도 플라즈마를 형성하는 planar magnetron RF 플라즈마 CVD를 이용하여 DLC(diamond-like carbon) 박막을 합성하였다. 이 방법을 이용하여 DLC 박막을 합성한다면 고밀도 플라즈마 때문에 종래의 플라즈마 CVD(RF-PECVD)법보다 증착속도가 더욱더 향상될 것이라는 것에 착안하였다. 이를 위해 magnetron에 의한 고밀도 플라즈마가 존재할 때도 역시 DLC박막형성에 미치는 RF 전력과 반응가스 압력이 중요한 반응변수인가에 대해 조사하였고, 일정한 자기장의 세기에서 RF전력과 DC self-bias 전압과의 관계를 조사하였다. 또한 RF전력변화에 따른 박막의 증착속도와 밀도를 측정하였다. 본 연구에 의해 얻어진 박막의 증착속도는 magnetron에 의한 이온화율이 매우 높아 기존의 RF-PECVD 법보다 매우 빠르며, DLC박막의 구조와 물질특성을 알아보기 위해 FTIR(fourier transform infrared)및 Raman 분광분석을 행한 결과 전형적인 양질의 고경질 다이아몬드상 탄소박막임을 알 수 있었다.