• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.980-984
• /
• 2002

This paper has studied thermal characteristics of machine tool to develope high speed spindle and optimum design condidering the thermal deformation. Comparing the test data of temperature measurement and structural analysis data using FEM, we verified the test validity and predicted thermal deformation, influence of spindle generation of heat, and established cooling system to prevent the thermal deformation. 1) The temperature rise of spindle system depends on increasing number of rotation and shows sudden doubling increment of number of rotation over 7,000rpm. 2) Oil jacket cooling can be effective cooling method below 8,000rpm but, over 8,000rpm, it shows the decrement of cooling effect. 3) Comparing FEM analysis results and revolution test results, we can confirm approximate temperature change consequently, it is possible to simulate temperature rise and thermal distribution on the inside of spindle system. 4) We can confirm that simulated approach by FEM analysis can be effective method in thermal-appropriate design.

• Journal of Korea Foundry Society
• /
• v.15 no.5
• /
• pp.507-513
• /
• 1995

The effect of forced convention on the solute redistribution of the Al ingot was studied quantitatively in an effort to fabricate high purity aluminum using a segregation method. Based on the experimental results, the solute concentration in the solid phase tended to decrease at the early state of solidification, and then increased gradually as solidification proceeded. Fe and Si concentrations decreased as growth rate decreased and as revolution speed increased. The solute redistribution obtained from the BPS model incorporated with the tangential flow component as well as the axial flow component within the melt, agreed well with the measurements.

• Asia pacific journal of information systems
• /
• v.13 no.3
• /
• pp.23-39
• /
• 2003

Recently, many organizations in various industries have introduced e-business for the purpose of adding value to their business. But, the e-business model has not existed before and so, it is difficult to analyze clear effectiveness. It frequently does not live up to an organization's expectations. It is due to an absence of environmental changes analysis in the new model, not by a new model itself. System Dynamics(SD) may provide effective results as a tool of analysis for the new model. This research shows the analysis of the effects of a simulated e channel model, which was expanded from existing channel modeling with actual data in basic materials industries. The results show average prices increasing by auction process on the e-market and an increase in sales. So, by increasing the speed of sale revolution stock expenses are reduced. Additionally, we applied a possible scenario to the developed simulation model and investigated strategic issues to draw desirable strategies with market changes.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1502-1507
• /
• 2004

In the 21st century, the traffic culture is changing suddenly with the advent of high-speed train era so called the traffic revolution age. The policy management for inducing the creativity becomes important for research institutes since the research institutes play an important role for the lead and distribution of new technologies. Therefore, the approach strategy of this investigation is based on the viewpoint of the organizational culture for better performance of research and development through stimulating inducements of creativity and active action of members. A questionnaire survey was performed on five research institutes including a professional railway research institute (PRRI) and four industrial research institutes for the current research, and a development plan for organizational culture of a PRRI has been presented based on the comparison study between two different types of research institutes.

• Electronics and Telecommunications Trends
• /
• v.32 no.6
• /
• pp.66-72
• /
• 2017

The frequency range of a radio wave is from 3kHz to 300GHz, and radio technologies use this range to improve the quality of human lives. Radio technologies have entered a new phase of communication. The core infrastructure used as the basis for technologies leading the fourth industrial evolution, such as artificial intelligence, the Internet of Things, autonomous cars/drones, augmented reality, robots, and remote medical diagnoses, is the 5G network. The 5G network enables transmitting and receiving large amounts of data at very high speed. In particular, application technologies with artificial intelligence have been studied, including radar, wireless charging, electromagnetic devices and their effects on humans, EMI/EMC, and microwave imaging. In this study, we present a future radio technology that is needed to prepare for the upcoming industrial revolution and digital transformation.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.2023-2026
• /
• 2002

This paper explains the study of controller design applied to SRM(Switched Reluctance Motor) concept. This controller executes controller algorithms via ${\mu}$-processor to increase stability and precise measurement, and VHDL (Very high speed integrated circuit Hardware Description Language) is designed to generate SRM driving signal. During initial period, SRM controller was designed to control .respective target RPM (Revolution per minutes) and PR (Proportional Integral Differential) coming from the PC(Personal Computer) monitor program, and receiving clockwise and counter-clockwise rotation signal and target RPM coming from the front panel, and receiving the location of rotational element and RPM generating from the position censor during activation period.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.207-209
• /
• 2005

Recently, the use of IPMSM is coming to be active, in many industrial applications. In sensorless drive of IPMSM, it is important to know the exact information of the initial rotor position, because the wrong estimation of the initial rotor position brings about the decrease of the starting torque, or a temporary reverse revolution, In addition, PMSM is necessary to use the accurate information of the inductance for the precise torque control owing to the reluctance torque. In this paper presents initial rotor position estimation method and, measure method of the each-axis inductance. And to minimize the speed estimations error, the estimated speeds are compensated by using an instantaneous reactive power in synchronously rotating reference frame.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.498-503
• /
• 2002

This paper has studied thermal characteristics of machine tool to develope high speed spindle and optimum design considering the thermal deformation. Comparing the test data of temperature measurement and structural analysis data using FEM, we verified the test validity and predicted thermal deformation, influence of spindle generation of heat, and established cooling system to prevent the thermal deformation. 1) The temperature rise of spindle system depends on increasing number of rotation and shows sudden doubling increment of number of rotation over 7,000rpm. 2) Oil jacket cooling can be effective cooling method below 8,000rpm but, over 8,000rpm, it shows the decrement of cooling effect. 3) Comparing FEM analysis results and revolution test results, we can confirmn approximate temperature change consequently, it is possible to simulate temperature rise and thermal distribution on the inside of spindle system. 4) We can confirm that simulated approach by FEM analysis can be effective mettled in thermal-appropriate design.

• 유체기계공업학회:학술대회논문집
• /
• 1999.12a
• /
• pp.252-256
• /
• 1999

In this research, the performance predictions of the submersible mixer were investigated. The variation of the performance characteristics by changing the impeller design parameters were discussed through the flow calculation results by using a commercial program, FLUENT. The performance of the submersible mixers is related to the velocity diffusion profiles downstream of the impeller and also the required input motor power to mix the fluid. In this study, the various design parameters such as the number of blade, the hub and tip diameters, the impeller blade profiles and revolution speed of the blades were taken for the fixed values. The blade sweep direction, the chord length distribution along with the radius of the blade and the inlet blade angle were changed to make different testing models. The flow calculation results show the effect of the changed design parameters on the performance of the submersible mixers and also give some helpful information for designing more efficient submersible mixers.

• Journal of Power System Engineering
• /
• v.17 no.4
• /
• pp.139-146
• /
• 2013

Because the magnetic bearing supports levitating body without contact, wear, noise and vibration, it is very useful to high revolution machinery. In this paper we selected ATmega 128, a less expensive and widely used micro controller, for control the magnetic bearing system. And we selected the sampling time and the control gain of PID controller through trial-and-error. The control program of the one board controller utilized lookup table to reduce calculation time, and bit shifting for the integer calculation in instead of floating point calculation. As the results, the controller carried out relatively high speed PID control on sampling time 0.25 ms. At last the rotation test for the magnetic bearing system was carried out by 3 phase induction motor and air turbine.