• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.162-166
• /
• 2003

In combined forward-backward extrusion with controlled forward speed by a counter punch, accurate parts with forward rod can be formed. As an extension of this method, reverse extrusion is proposed, in which the extruded forward rod is pushed back while the main punch is kept at the final position after the forward-backward extrusion process. The experiment is carried out using lead as a model material. With the reverse extrusion method, longer forward rods can be formed without under-filling defect than that by combined extrusion with controlling extrusion speed.

• 비파괴검사학회지
• /
• 제29권6호
• /
• pp.550-556
• /
• 2009

In an application of a time reversal(TR) focusing of array transducer on a defect inside the test material, we employ a new time delay focusing technique based the TR process. In order to realize this idea, a multi-channel ultrasonic system is constructed capable of applying necessary time delays to each channel. The TR-based focusing procedure first measures the backscattered signals after firing one of the array elements. A phase slope method is then used to determine the time-of-flights of the backscattered signals received by all elements of the array. These time delays are used to adjust the time of excitation of the elements for transmission focusing on the defect. In addition to the TR focusing, the classical phased array focusing is also considered for comparison. Experimental results show that the TR-based time delay focusing produces much stronger backscattered signals than the phased array focusing, demonstrating the enhanced capability of the TR focusing.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1552-1553
• /
• 2011

The HVDC transformer which is one of the main equipments for HVDC(High Voltage Direct Current) electric power transmission systems is exposed to not only AC voltage but also the inflowing DC voltage which comes from the DC-AC converter systems. Therefore, the HVDC transformer insulation system is required to withstand the electric field stress under AC, DC and DC polarity reversal conditions. However the electric field distributions under those conditions are different because the AC electric field and DC electric field are governed by permittivity and conductivity, respectively. In this study, the changes of electric potential and electric field of conventional AC transformer insulation system under DC polarity reversal test condition were analyzed by FEM(Finite Element Method). The DC electric field stress was concentrated in the solid insulators while the AC electric field stress was concentrated in the mineral oil. In addition, the electric stress under that condition which is affected by the surface charge accumulation at the interfaces between insulators was evaluated. The stress in some parts could be higher than that of AC and DC condition, during polarity reversal test. The result of this study would be helpful for the HVDC transformer insulation system design.

• 한국자기학회지
• /
• 제6권4호
• /
• pp.199-203
• /
• 1996

Co/Pd 다층박막의 자화반전 거동을 조사하기 위하여, 먼저 시료를 자기장 소거법으로 탈자시킨 다음 초기자화 곡선과 minor loops 를 측정하였다. 또한 보자력 및 포화자화는 수직자화곡선으로부터 구하였으며, 수직자기이방성은 온도별로 측정한 수직 및 수평자화곡선의 면적차이를 이용하여 구하였다. 자화반저거동의 분석을 위하여 여러가지 정상적이고 반정량적인 방법을 측정결과에 적용하였다. 이들 결과로부터 본 실험에 사용된 시료의 자화반전의 지배적인 거동은 자벽의 pinning이며, 스퍼터링 압력이 증가할수록 보자력이 증가하는 경향은 Kronmuller 식 $H_{c}$ (T) .var. $r_{o}$ .center dot. $K_{u}$에 의해 설명될 수 있었다.다.다.

• Smart Structures and Systems
• /
• 제30권4호
• /
• pp.397-410
• /
• 2022

It is essential to monitor the working conditions of bolt-connected joints, which are widely used in various kinds of steel structures. The looseness of bolts may directly affect the stability and safety of the entire structure. In this study, a guided wave-based method for bolt looseness detection and localization is presented for a joint structure with multiple bolts. SH waves generated and received by a small number (two pairs) of magnetostrictive transducers were used. The bolt looseness index was proposed based on the changes in the reconstructed responses excited by the time reversal signals of the measured unit impulse responses. The damage locations and local damage severities were estimated using the damage indices from several wave propagation paths. The back propagation neural network (BPNN) technique was employed to identify the local damages. Numerical and experimental studies were conducted on a lap joint with eight bolts. The results show that the total damage severity can be successfully detected under the effect of external force and measurement noise. The local damage severity can be estimated reasonably for the experimental data using the BPNN constructed by the training patterns generated from the finite element simulations.

• ETRI Journal
• /
• 제46권2호
• /
• pp.333-346
• /
• 2024

Various techniques for noninvasively focus microwave energy on lesions have been proposed for thermotherapy. To focus the microwave energy on the lesion, a focusing parameter, which is referred to as the magnitude and phase of microwaves radiated from an external array antenna, is very important. Although the finite-difference time-domain (FDTD)-based time-reversal (TR) focusing algorithm is widely used, it has a long processing time if the focusing target position changes or if optimization is needed. We propose a technique to obtain multistatic data (MSD) based on Green's function and use it to derive the focusing parameters. Computer simulations were used to evaluate the electric fields inside the object using the FDTD method and Green's function as well as to compare the focusing parameters using FDTD- and MSD-based TR focusing algorithms. Regardless of the use of Green's function, the processing time of MSD-based TR focusing algorithms reduces to approximately 1/2 or 1/590 compared with the FDTD-based algorithm. In addition, we optimize the focusing parameters to eliminate hotspots, which are unnecessary focusing positions, by adding phase-reversed electric fields and confirm hotspot suppression through simulations.

• 한국정밀공학회지
• /
• 제24권3호
• /
• pp.117-123
• /
• 2007

This paper describes a three-probe system that can be used to measure the parallelism and straightness of a pair of rails simultaneously. The parallelism is measured using a modified reversal method, while the straightness is measured using a sequential two-point method. The measurement algorithms were analyzed numerically using a pair of functionally defined rails to validate the three-probe system. Tests were also performed on a pair of straightedge rails with a length of 250 mm and a maximum straightness deviation of $0.05{\mu}m$, as certified by the supplier. The experimental results demonstrated that the parallelism-measurement algorithm had a cancellation effect on the probe stage motion error. They also confirmed that the proposed system could measure the slope of a pair of rails about $0.06{\mu}rad$. Therefore, by combining this technique with a sequential differential method to measure the straightness of the rails simultaneously, the surface profiles could be determined accurately and eliminate the stage error. The measured straightness deviation of each straight edge was less than $0.05{\mu}m$, consistent with the certified value.

• 한국통신학회논문지
• /
• 제33권12A호
• /
• pp.1156-1164
• /
• 2008

본 논문에서는 중계기 기반의 무선통신시스템에서 기지국과 단말기의 효율적인 데이터 교환을 이루기 위한 시역전 방법을 적용한 양방향 부호화 방법(BTC)을 제안한다. 기존의 중계기를 기반으로 한 데이터 교환 방식은 각국이 데이터 송신을 하는 동안 간섭을 피하기 위해 타 국은 송신을 하지 않는다. 따라서 기지국과 단말기가 데이터를 교환하기 위해서는 총 네 단계의 전송단계가 필요하다. 그러나 제안된 시역전 알고리즘을 적용한 양방향 부호화 방법은 중계기가 데이터를 수신하기 전에 탐침신호를 기지국과 단말기에 송신하고, 이를 이용해 양 국이 중계기에 신호를 동시에 송신할 수 있다. 따라서 두 단계 만에 기지국과 단말기가 데이터 교환을 이룰 수 있어 시스템 용량을 향상 시킬 수 있다. 또한 중계기에 기지국과 단말기 사이의 채널 추정을 위한 추가적인 연산이 필요하지 않으므로 낮은 복잡도로 구현이 가능한 장점이 있다. 전산모의실험을 통해 제안된 방법의 향상된 시스템 용량을 보였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.9-10
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.535-536
• /
• 2011