• 제목/요약/키워드: Reusing rate

검색결과 62건 처리시간 0.018초

휴대폰부품의 재사용률 극대화를 위한 설계 지침 개발 (Development of the Design Guideline to Increase the Reusing Rate of Cellular Phone Parts)

  • 김찬석;이화조
    • 한국정밀공학회지
    • /
    • 제23권8호
    • /
    • pp.108-118
    • /
    • 2006
  • Reusing is one of the most environmentally friendly recycling methods. For the economical remanufacturing of used cellular phone, the cellular phones should be design for easy disassembly. In this paper, we analyzed the components and connecting elements of cellular phones and developed a guideline for the design of the cellular phones. A software for the disassembly assessment was also developed. Redesigned cellular phone by the developed guideline and its original phone was analyzed by the disassembly assessment software. Disassembly time could be reduced about 40% and reusing rate could be improved about 37%.

A Model for Reusing Requirements Using Examples from Open Source Software

  • Kim, Jong-Bae
    • Journal of information and communication convergence engineering
    • /
    • 제10권3호
    • /
    • pp.284-294
    • /
    • 2012
  • The quality of requirements is one of the key factors in the success of a project. One of the studies on successful projects is the reuse of requirements. However, the rate of failed projects is about 70%, and these projects often fail because of improper requirements. The current techniques for software reuse may not perform requirement engineering appropriately or develop requirements having good characteristics. In order to improve this situation, we propose a model for reusing requirements. We expect that our model will contribute toward increasing project productivity using requirement reuse in existing projects, and reusing requirements that have good quality.

無電解 Ni-Cu-P 廢 도금액의 재사용에 관한 연구 (A Study on Reusing of Electroless Ni-Cu-P Waste Solution)

  • 오이식
    • 자원리싸이클링
    • /
    • 제10권2호
    • /
    • pp.27-33
    • /
    • 2001
  • 무전해 Ni-Cu-P폐 도금액의 재사용에 대해 소정의 조건에서 조사하였다. 아연화처리한 후 니켈 촉매의 처리는 니켈 촉매처리를 하지 않았을 때 보다 도금시간이 연장되었다 Batch type에서 새로 제조한 도금액에 폐 도금액을 50% 첨가하여도 무전해 Ni-Cu-P 폐 도금액의 재사용이 가능하였다. 새로 제조한 도금액에 소모된 도금액의 성분을 연속적으로 보충하여 도금하면(Continuous type), 보충하지 않았을 경우(B기ch type)보다 도금시간이 10배 연장되었다. 새로 제조한 도금액에 폐 도금액 50%를 첨가하여 소모된 도금액의 성분을 연속적으로 보충할 경우(Continuous type)의 도금시간은 보충하지 않았을 경우(Batch type)의 도금시간 보다 3.7배 연장되었다. 도금층의 불량과 급격한 도금속도의 감소는 도금층의 Ni과 Cu의 성분 변화에 큰 영향을 미쳤다.

  • PDF

무전해 Ni-Cu-B 폐 도금액의 재사용에 관한 연구 (A Study on Reusing of Electroless Ni-Cu-B Waste Solution)

  • 오이식;배영한
    • 자원리싸이클링
    • /
    • 제12권1호
    • /
    • pp.18-24
    • /
    • 2003
  • 무전해 Ni-Cu-B 폐 도금액의 재사용에 대해 소정의 조건에서 조사하였다. 아연화처리한 후 니켈 촉매의 처리는 니켈 촉매처리를 하지 않았을 때 보다 도금시간이 연장되었다. Batch type에서 새로 제조한 도금액에 폐 도금액을 40% 첨가하여도 무전해 Ni-Cu-B 폐 도금액의 재사용이 가능하였다. 새로 제조한 도금액에 소모된 도금액의 성분을 연속적으로 보충하여 도금하면(continuous type), 보충하지 않았을 경우(batch type) 보다 도금시간이 6배 연장되었다. 새로 제조한 도금액에 폐 도금액 40%를 첨가하여 소모된 도금 액의 성분을 연속적으로 보충할 경우(continuous type)의 도금시간은 보충하지 않았을 경우(continuous type)의 도금시간 보다 2배 연장되었다. 도금층의 불량과 급격한 도금속도의 감소는 도금층의 Ni과 Cu의 성분 변화에 큰 영향을 미쳤다.

C-HMI 기반의 원격지 중수도 설비 실시간 제어와 모니터링 구현 (Implementation of C-HMI based Real-time Control and Monitoring for Remote Wastewater Reclamation and Reusing System)

  • 이운선;박만곤
    • 전기학회논문지
    • /
    • 제62권5호
    • /
    • pp.717-722
    • /
    • 2013
  • The wastewater reclamation and reusing system has been rising as an alternative of water resource exhaustion that the whole world is experiencing. In order to be able to bring about improvement of the existing wastewater reclamation and reusing system, this research has developed of Conversion-Human Machine Interaction (C-HMI) based real-time control and monitoring system such as a sensor module and gate module, web monitoring system. This system was communication almost-error-free in various environment and situation. As a result, we have achieved our goal that has to doing work correctly as a sensor and gateway module that communication error is less than 0.2% throughout the embodied system and add that it can be easily controled and configured as an interface equipment to a complex sensor of water quality. According to this, the construction of a database capable of analyzing and assessing collection, storage and various elements of reliable water quality and flow rate data can be possible.

재사용(再使用) 투석기(透析器)의 효과(效果) ${\cdot}$ 안정성(安定性) 및 비용절감(費用節減)에 관한 연구(硏究) (A Study of the Effect, Safety and Saving Expense by Reusing Hemodialyzer)

  • 정하정
    • 간호행정학회지
    • /
    • 제3권1호
    • /
    • pp.93-106
    • /
    • 1997
  • By the increase of the rate of existence of the hemodialyzing patients, they were required the long run treatment. Regardless of medical insurance expansion, hemodialyzing cost much expenses so that hospital has been considering the reuse of hemodialyzer and flowing euqipments along with the diverse study and progress of the ways of hemodialyzing and medical instruments. This study was aimed to provide the basic materials regarding the reuse of hemodialyzer which is used for the patients of chronic renal disease. The reusing program in the artificial kidney center of K hospital has been used for this study from 50 patients aften one year result from Sep. 1995 through Aug. 1996. Automatic equipment of DRS-4 made by Seratronic Co., was used as the equipment and it was retreated with the function test simultaneously. Compliaction and confirmation of the infection were by the records of the hemodialysis of the patients. SPSS was used for the analysis of the materials by computerization. The character of the patients and the rate of removal was by mistake and percentage, function test and rate of complication by Ftest(ANOVA) and the rate of complication per items by ${\chi}^2$ and Ftest. As the post test the Duncan's test was used for the statistically significant different variables in the standard of p<.05 after Ftest. The followings are the summary of the result : 1) In the function test of the new hemodialyzer and the reused one, and in all of CA110 and CF15.11, the dialyzer ultrafiltration coeffient(KUf) was appeared to have been higher in the reusing groups than the first use ones. This has been the normal limit showing no troubles with them. 2) In the function test of the new and reused hemodialyzer, in all of CA110 and CF15.11, the total blood volume was appeared to have been the less value in the reuse groups than the new ones. This was the price within 80% of the first price that both showed possible for use. 3) The result of reuse hemodialyzer of CA110 was $29.48{\pm}7.83$ in average in the test of leak test while $17.3{\pm}7.96$ in reuse of CF15.11. The normal limit of <60 was the leak test result. So both of the hemodialyzer was normal for reuse. 4) The rate of removal of Blood Urea Nitrogen(BUN) was 72.25% in CA110 hemodialyzer by reusing 16-20 times as the highest rate showing the better result in the reuse hemodialyzer, while in CF15.11 hemodialyzer showed 71.16% by highest rate in the first use by the highest rate with no difference from the reuse. 5) The rate of removal of serum creatinine of CA110 was 64.08% by highest rate in reuse of 1-5 times by showing better result in reuse hemodialyzer. While in CF15.11 66.47% the highest by reuse of 16-20 times showing no difference from each other. 6) No patients were admitted or precribed by antibiotics in relation with reuse dialyzer and no reports were shown about hepatitis $B{\cdot}C$. AIDS in fection. 7) Of the total 248 episods of complication due to the hemodialyzing, 86 by first use, 73 by 1-5 times, 35 by 6-10 times, 35 by 11-15 times and 19 by 16-20 times have been shown which have had no significant difference between the groups. 8) In the comparison of the expense for the hemodialyzer, there was the effect of saving 11,597.6 Won between the first and reuse hemodialyzer. And by decreasing the extracted materials, they did the great role of disposing the waste matters.

  • PDF

하수처리수의 재이용을 위한 처리습지 및 도시 상류하천 생태환경복원 - 공주시 제민천 생태적수질정화비오톱을 중심으로 - (An Ecological Restoration of Treatment Wetland and Urban Upper Stream for Reusing Sewage Treatment Water - In the case of Sustainable Structured Wetland Biotop System at Upper Part of Jaemin Stream in Gongju-si, Korea -)

  • 변찬우
    • 한국환경복원기술학회지
    • /
    • 제17권5호
    • /
    • pp.65-77
    • /
    • 2014
  • The ecosystem of Jaemin stream, flowing into the center of Gongju-si, had been damaged by low water quality and lack of water quantity of the steam. However, after applying the SSB (Sustainable Structured wetland Biotop) system to the flood plain and the upstream of Jaemin stream, the efficiency of ecological water purification and ecological restoration are as follows. Through the constant maintenance and monitoring from year 2009 to year 2013 after restorative design and construction the average influent concentration of BOD5 was 4.2 mg/L, and the average effluent concentration was 1.8 mg/L, reaching ecological water purification rate of 57%. As for the T-N, the average influent concentration was 9.983 mg/L, and the average effluent concentration was 6.303 mg/L, showing the rate of 37%. For the T-P, the average influent concentration was 0.198 mg/L, and the average effluent concentration was 0.098 mg/L, being the rate of 51%. The vegetation of Jaemin stream monitored for 2 years after the restoration was composed of 51 species in 28 families which show high ratio of planted native species. As for the animals in the site, 5 species in 3 families of reptiles and amphibians, 34 species of 23 families of birds, and 3 species in 2 families of mammals were monitored, indicating that the bio-diversity of the site has improved, as well.

무전해 Co-Cu-P 폐 도금액의 재사용에 관한 연구 (A Study on Reusing of Electroless Co-Cu-P Waste Solution)

  • 배영한;오이식
    • 자원리싸이클링
    • /
    • 제14권4호
    • /
    • pp.34-40
    • /
    • 2005
  • 무전해 Co-Cu-P 폐 도금액의 재사용에 대해 소정의 조건에서 조사하였다. 아연화처리한 후 코발트 촉매의 처리는 코발트 촉매 처리를 하지 않았을 때 보다 도금시간이 연장되었다. Batch type에서 새로 제조한 도금액에 폐 도금액을 $50\%$ 첨가하여도 무전해 Co-Cu-P폐 도금액의 재사용이 가능하였다. 새로 제조한 도금액에 소모된 도금액의 성분을 연속적으로 보충하여 도금하면(Continuous 쇼pe), 보충하지 않았을 경우(Batch type) 보다 도금시간이 7.5배 연장되었다. 새로 제조한 도금액에 폐 도금액 $50\%$를 첨가하여 소모된 도금액의 성분을 연속적으로 보충할 경우(Continuous type)의 도금시간은 보충하지 않았을 경우(Batch type)의 도금시간 보다 2.5배 연장되었다. 도금층의 불량과 급격한 도금속도의 감소는 도금층의 Co와 Cu의 성분 변화에 큰 영향을 미쳤다.

디지털방송 콘텐츠 재사용을 위한 효율적인 시간정보 보정 방법 (Efficient Time Information Correction for Reusing Digital Broadcasting Contents)

  • 배병준;김윤세
    • 한국인터넷방송통신학회논문지
    • /
    • 제10권2호
    • /
    • pp.45-52
    • /
    • 2010
  • DTV, IPTV, DMB 등 다양한 디지털방송 매체가 등장함에 따라서 디지털 콘텐츠에 대한 요구도 많아지고 있다. 디지털 콘텐츠의 제작 비용 및 초기 디지털방송 시장을 고려해 볼 때, 제작된 콘텐츠를 저장하여 재사용하는 경우가 빈번할 것이다. 이러한 경우, 재사용되는 디지털 콘텐츠는 각각의 디지털방송 시스템을 통해 전송하기 위해서 지정된 전송율을 맞추어야 하며, 이 과정에서 콘텐츠 내의 시간정보가 틀어진다. 본 논문에서는 틀어진 시간정보를 보정하는 효율적인 방법을 제안한다. 이 방법은 기존의 방법에 비해 연산량을 줄여서 구현이 용이하며, 그로 인한 송신시스템에서의 콘텐츠의 전송 지연 시간을 줄여 주는 효과가 있다.

Power Allocation for Half-duplex Relay-based D2D Communication with QoS guarantee

  • Dun, Hui;Ye, Fang;Jiao, Shuhong
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제13권3호
    • /
    • pp.1311-1324
    • /
    • 2019
  • In the traditional cellular network communication, the cellular user and the base station exchange information through the uplink channel and downlink channel. Meanwhile, device-to-device (D2D) users access the cellular network by reusing the channel resources of the cellular users. However, when cellular user channel conditions are poor, not only D2D user cannot reuse its channel resources to access the network, but also cellular user's communication needs cannot be met. To solve this problem, we introduced a novelty D2D communication mechanism in the downlink, which D2D transmitter users as half-duplex (HD) relays to assist the downlink transmission of cellular users with reusing corresponding spectrum. The optimization goal of the system is to make the cellular users in the bad channel state meet the minimum transmission rate requirement and at the same time maximize the throughput of the D2D users. In addition, i for the purpose of improving the efficiency of relay transmission, we use two-antenna architecture of D2D relay to enable receive and transmit signals at the same time. Then we optimized power of base station and D2D relay separately with consideration of backhaul interference caused by two-antenna architectures. The simulation results show that the proposed HD relay strategyis superior to existing HD and full-duplex (FD) models in the aspects of system throughput and power efficiency.