• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3997-4001
• /
• 2014

The aim of this study was to suggest site-specific reuse alternatives for closed unsanitary landfills (CULs) scattered in Gyeongbuk Province. The CULs were classified with the factors affecting the site reuse alternative to provide basic data for systematic site reuse. Statistical analysis showed that the site area was the main factor in site classification among the site area, distance to road, and distance to the village. The results proposed a site-specific guide flow to the reuse of the CULs.

• Journal of Communications and Networks
• /
• v.12 no.2
• /
• pp.103-113
• /
• 2010

In this paper, a tradeoff between the total energy consumption-per-bit and the end-to-end rate under spatial reuse in wireless multi-hop network is developed and analyzed. The end-to-end rate of the network is the number of information bits transmitted (end-to-end) per channel use by any node in the network that is forwarding the data. In order to increase the bandwidth efficiency, spatial reuse is considered whereby simultaneous relay transmissions are allowed provided there is a minimum separation between such transmitters. The total energy consumption-per-bit includes the energy transmitted and the energy consumed by the receiver to process (demodulate and decoder) the received signal. The total energy consumption-per-bit is normalized by the distance between a source-destination pair in order to be consistent with a direct (single-hop) communication network. Lower bounds on this energy-bandwidth tradeoff are analyzed using convex optimization methods. For a given location of relays, it is shown that the total energy consumption-per-bit is minimized by optimally selecting the end-to-end rate. It is also demonstrated that spatial reuse can improve the bandwidth efficiency for a given total energy consumption-per-bit. However, at the rate that minimizes the total energy consumption-per-bit, spatial reuse does not provide lower energy consumption-per-bit compared to the case without spatial reuse. This is because spatial reuse requires more receiver energy consumption at a given end-to-end rate. Such degraded energy efficiency can be compensated by varying the minimum separation of hops between simultaneous transmitters. In the case of equi-spaced relays, analytical results for the energy-bandwidth tradeoff are provided and it is shown that the minimum energy consumption-per-bit decreases linearly with the end-to-end distance.

• Journal of Korea Multimedia Society
• /
• v.16 no.5
• /
• pp.601-609
• /
• 2013

One of the most serious factors constraining the next generation cellular mobile consumer communication systems will be the severe co-channel interference experienced at the cell edge. Such a capacity-degrading impairment combined with the limited available spectrum resource makes it essential to develop more spectrally efficient solutions to enhance the system performance and enrich the mobile user's application services. This paper proposes a unique hybrid method of frequency hopping (FH) and subcarrier-reuse-partitioning that can maximize the system capacity by efficiently utilizing the available spectrum while at the same time reduce the co-channel interference effect. The main feature of the proposed method is that it applies an optimal combination of different frequency reuse factors (FRF) and FH-subcarrier allocation patterns into the partitioned cell regions. From the simulation results, it is shown that the proposed method can achieve the optimum number of subcarrier subsets according to the frequency-reuse distance and results in better performance than the fixed FRF methods, for a given partitioning arrangement. The results are presented in the context of both blocking probability and BER performances. It will also be shown how the proposed scheme is well suited to FH-OFDMA based cellular systems aiming at low co-channel interference performance and optimized number of subcarriers.

• Journal of Communications and Networks
• /
• v.8 no.1
• /
• pp.13-20
• /
• 2006

In cellular mobile communications, how to achieve optimum system capacity with limited frequency spectrum is one of the main research issues. Many dynamic channel assignment (DCA) schemes have been proposed and studied to allocate the channels more efficiently, thus, the capacity of cellular systems is improved. Reuse partitioning (RP) is another technique to achieve higher capacity by reducing the overall reuse distance. In this paper, we present a network-based DCA scheme with the implementation of RP technique, namely dynamic reuse partitioning with interference information (DRP-WI). The scheme aims to minimize the effect of assigned channels on the availability of channels for use in the interfering cells and to reduce their overall reuse distances. The performance of DRP-WI is measured in terms of blocking probability and system capacity. Simulation results have confirmed the effectiveness of DRP-WI scheme. Under both uniform and non-uniform traffic distributions, DRP-WI exhibits outstanding performance in improving the system capacity. It can provide about 100% capacity improvement as compared to conventional fixed channel assignment scheme with 70 system channels.

• Journal of Internet Computing and Services
• /
• v.22 no.5
• /
• pp.1-8
• /
• 2021

Small-cells in heterogeneous networks are one of the important technologies to increase the coverage and capacity in 5G cellular networks. However, due to the randomly arranged small-cells, co-tier and cross-tier interference increase, deteriorating the system performance of the network. In order to manage the interference, some channel management methods use fractional frequency reuse(FFR) that divides the cell coverage into the inner region(IR) and outer region(OR) based on the distance from the macro base station(MBS). However, since it is impossible to properly measure the distance in the method with FFR, we propose a new interference aware FFR(IA-FFR) method to enhance the system performance. That is, the proposed IA-FFR method divides the MUEs and SBSs into the IR and OR groups based on the signal to interference plus noise ratio(SINR) of macro user equipments(MUEs) and received signals strength of small-cell base stations(SBSs) from the MBS, respectively, and then dynamically assigns subchannels to MUEs and small-cell user equipments. As a result, the proposed IA-FFR method outperforms other methods in terms of the system capacity and outage probability.

• Current Optics and Photonics
• /
• v.8 no.4
• /
• pp.345-354
• /
• 2024

The bit walk-off effect caused by fiber dispersion and carrier reuse in the base station (BS) are two key problems in radio-over-fiber (ROF) systems. In this paper, a novel frequency-octupling ROF system based on the Mach-Zehnder modulator (MZM) is proposed, which can overcome the bit walk-off effect and realize carrier reuse by inserting pilot signals. Theoretical analysis and simulation verification of the system are carried out. Under the condition of a Q factor greater than 6, the optical fiber transmission distance of the upper and lower links is more than 290 km and 80 km, respectively. The influence of the main device parameters of the system on the Q factor is analyzed when they deviate from their designed values. The system designed in this paper can not only effectively overcome the bit walk-off effect, but also solve the problem of downlink performance degradation and the limitation of tunability caused by conventional carrier reuse in ROF. The system can greatly increase the transmission distance and improve the performance of the system and has an important application prospect in ROF.

• Journal of Integrative Natural Science
• /
• v.13 no.1
• /
• pp.1-7
• /
• 2020

This paper proposes a novel fractional frequency reuse(FFR) based on dynamic user distribution. In the FFR, a macro cell is divided into two regions, i.e., the inner region(IR) and outer region(OR). The criterion for dividing the IR and OR is the distance ratio of the radius. However, these distance-based criteria are uncertain in measuring user performance. This is because there are various attenuation phenomena such as shadowing and wall penetration as well as path loss. Therefore, we propose a novel FFR based on dynamic user classification with signal to interference plus noise ratio(SINR) of macro users and classify the FFR into two regions newly. Simulation results show that the proposed scheme has better performance than the conventional FFR in terms of SINR and throughput of macro cell users.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.01a
• /
• pp.1-2
• /
• 2020

응용프로그램의 응답성을 향상시키기 위해서는 저장장치 시스템의 데이터 처리 능력이 중요하다. 한편, 차세대 메모리(NVDIMM)는 DRAM과 SSD 중간 정도의 성능 특성과 저장 용량을 갖는다. NVDIMM을 저장장치의 캐시로 사용함으로써 메모리와 저장장치의 격차는 많이 줄게 된다. 본 논문에서는 경량의 재사용 거리 측정 기법을 이용하여 효율적으로 디스크를 캐싱하는 기법을 제안한다. 제안 기법은 경량의 재사용 거리 측정 기법을 바탕으로 계산된 CFD(Computational Fluid Dynamics)값에 따라 디스크 캐시에 해당 데이터 적재 여부를 결정한다. 결과적으로 제안 기법을 적용한 디스크 캐시를 운용함에 따라 캐시의 히트율을 향상시켰다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10c
• /
• pp.160-162
• /
• 2001

Cyclic-Reservation Multiple-Access(CRMA) is an access scheme for high-speed local and metropolitan area networks based on folded-bus or dual-bus configurations. CRMA provides high throughput and fairness independent of the network speed or distance. This paper describes a simulation-based quantitative analysis of the performance gains obtained by introducing slot reuse in CRMA. Generally, a longer cycle length means a longer access delay and a lower throughput. There-fore, it is desirable to develop a scheme such that the cycle length is the shortest. In this paper, we will study the problem of reducing the total number of empty slots generated within every cycle. However, it has been shown that the problem is NP-complete under the constraint that all empty slots used by a station in a cycle are required to be consecutive. We present the algorithm that improves previous novel approach by using previous node information. We compare our slots reuse scheme with several slot reuse algorithms such as region scheme (FMR), address schemes, novel approach in terms of the following two important performance criteria: average cycle length and average slot utilization ratio. As compared with the one proposed in novel algorithm, the new scheme makes the cycle length much shorter. Besides, the resulting slot utilization and the access delay are better than those of the other two schemes.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.3
• /
• pp.183-199
• /
• 2022

With the consumption of smart phone content increasing rapidly, the short clip market in China is rapidly growing. TikTok, a short clip platform, has achieved great business success. However, there is not much research done on TikTok platform from the customers' perspective. To this end, this study aimed to verify the relationship between the social network characteristics on the TikTok platform, attachment toward the TikTok platform, user participation, social identity, psychological distance and reuse intention through an empirical investigation. In August 2021, a survey was conducted on consumers on the subject of TikTok platform in China. The results of the study are as follows. First, the social network characteristics significantly affected the user participation and the attachment. Second, both the attachment and the user participation had a significant impact on reuse intention. Third, user participation had a significant impact on attachment. Fourth, social identity played a significant moderating role in the relationship between social network characteristics and user participation. Fifth, Psychological distance played a significant moderating role in the relationship between social network characteristics and attachment. The results of this study are expected to provide theoretical and practical implications for research on TikTok platform.