• 한국수자원학회논문집
• /
• 제51권4호
• /
• pp.323-334
• /
• 2018

최근 물 사용량의 증가와 잦은 가뭄 발생으로 인해 물 부족 현상이 심화되고 있다. 따라서 기존 취수원에 대한 의존도를 줄이고 버려졌던 물의 재이용을 활성화하여 친환경적이며 지속가능한 대체수원을 확보할 필요성이 부각되고 있다. 국내에서 활용가능한 물 재이용 방법은 빗물재이용, 중수 재이용 및 하수재이용 등 크게 세 가지로 구분할 수 있으나, 아직 국내에는 물 재이용이 활발하게 추진되고 있지 않다. 본 연구에서는 세 가지 물 재이용 방안 중 연중 발생량이 일정하고 이용가능 수량이 많으며, 수질이 비교적 양호한 하수재이용수의 활용방안을 모색하였다. 적용대상 지역으로 선정한 용인시는 총 26곳의 골프장이 운영 중에 있으며 이는 전국에서 운영 중인 골프장의 약 10%에 해당한다. 골프장은 시설 운영을 위해 많은 양의 용수를 소비하는 대규모 수요처이므로 재이용수를 활용한다면 큰 경제적, 사회 환경적 편익을 얻을 수 있을 것이다. 본 연구에서는 용인시를 대상으로 하수처리장 인근에 위치한 골프장 내 조경용수로 하수재이용수를 활용하였을 경우의 경제적 효과를 비용 및 편익 추정을 통해 분석하였다.

• 인터넷정보학회논문지
• /
• 제19권1호
• /
• pp.11-17
• /
• 2018

본 논문에서는 회사 또는 백화점 등과 같은 고층 건물에 다수의 펨토셀 기지국들(Femtocell base stations, fBSs)이 밀집되어 배치되는 기업형 펨토셀 네트워크(Enterprise femtocell network, EFN) 환경에서 부분 주파수 재사용 (Fractional frequency reuse, FFR) 자원할당 방법을 이용하여 하향링크에 대한 시스템 성능을 분석한다. 이를 위해, 먼저 매크로셀과 펨토셀 사이의 주파수 간섭을 완화시키는 Split reuse 주파수 할당 방법에 대해 소개하고, 이후 EFN의 fBS들에게 주파수 간섭 완화 및 주파수 효율을 극대화할 수 있는 FFR을 이용한 자원할당 방법을 제안한다. 마지막으로 시뮬레이션을 통해 제안하는 FFR 자원할당 방법의 시스템 성능을 분석하고, EFN 환경에서 주파수 재사용 계수(Frequency reuse factor: FRF)를 4로 사용하는 전형적인 FRF 4 방법보다 제안하는 FFR 자원할당 방법이 평균 fUE 용량, 전체 EFN 용량, 그리고 Outage probability 측면에서 우수한 성능임을 보인다.

• 한국농공학회논문집
• /
• 제55권2호
• /
• pp.9-20
• /
• 2013

Many studies have reported additional treatment is needed to use wastewater for agricultural purpose. Economic considerations should be taken into account to establish infrastructure for agricultural reuse because of a large amount of water use in irrigation and relatively low water quality requirement. The objective of this study was to conduct economic analysis of wastewater reclamation and reuse systems for agriculture. A system dynamics approach considering complexity and dynamics in the wastewater reuse systems was used for the economic analysis, which are related with social, environmental, and economic problems. Sensitivity and benefit cost analysis for wastewater reuse systems was conducted through the established economic assessment model. The result of sensitivity analysis showed that water resources development and installation cost were the most sensitive for total benefits and costs, respectively. The scenario-based test of the organized economic assessment model shows marginal cost ranges and enables decision-makers to decide reasonable cost for the wastewater reuse systems for agriculture.

• 유통과학연구
• /
• 제15권4호
• /
• pp.59-67
• /
• 2017

Purpose - This study's aims are to examine the effects of airline service quality on brand image, brand attitude and reuse intention and the mediating roles of brand image and brand attitude in the relationship between airline service quality and reuse intention. Research design, data and methodology - A total of 500 questionnaire copies were distributed and 474 were used for the empirical study after excluding some empirical inappropriate or unusable ones. To analyze the collected data, the SPSS/WIN 22.0 statistical package was used. Results - The result of analysis showed that all the intangible, tangible and human elements of the airline service quality positively influenced on brand image and brand attitude and did not directly influence on reuse intention. However, brand image and brand attitude played mediating roles in the relationship between all the service quality elements and reuse intention. Conclusions - This means that airlines need to develop service quality, which is differentiated and provides special feelings for customers and work out improvement strategies for positive brand images and attitudes, since customers choose and reuse airlines, based on brand images and attitudes, which are perceived and formed through the experience of airline service quality and word of mouth.

• 정보처리학회논문지D
• /
• 제14D권6호
• /
• pp.665-674
• /
• 2007

소스 코드 재사용은 다른 개발자에 의해 만들어진 코드를 정확하게 이해하거나 검색하기 어렵다는 점에서 몇 가지 제한점을 갖는다. 이러한 문제점을 해결하기 위해서 소스코드 자체보다는 분석 및 설계 정보를 재사용하는 것이 가능해야 한다. 이에 본 논문은 객체 모델 및 패턴을 재사용하기 위해 필요한 analogical 매칭 기법을 제안한다. 그리고_ 객체 모델과 디자인 패턴을 재사용 컴포넌트로서 저장할 수 있도록 표현하는 방법을 제안한다. 즉, 재사용 라이브러리에 저장된 유사 컴포넌트를 검색하는 analogical 매칭 함수와 매칭을 지원할 수 있는 라이브러리 구조 및 재사용 컴포넌트의 라이브러리내 표현 방법에 대해 기술하였다.

• 한국멀티미디어학회논문지
• /
• 제16권5호
• /
• pp.601-609
• /
• 2013

One of the most serious factors constraining the next generation cellular mobile consumer communication systems will be the severe co-channel interference experienced at the cell edge. Such a capacity-degrading impairment combined with the limited available spectrum resource makes it essential to develop more spectrally efficient solutions to enhance the system performance and enrich the mobile user's application services. This paper proposes a unique hybrid method of frequency hopping (FH) and subcarrier-reuse-partitioning that can maximize the system capacity by efficiently utilizing the available spectrum while at the same time reduce the co-channel interference effect. The main feature of the proposed method is that it applies an optimal combination of different frequency reuse factors (FRF) and FH-subcarrier allocation patterns into the partitioned cell regions. From the simulation results, it is shown that the proposed method can achieve the optimum number of subcarrier subsets according to the frequency-reuse distance and results in better performance than the fixed FRF methods, for a given partitioning arrangement. The results are presented in the context of both blocking probability and BER performances. It will also be shown how the proposed scheme is well suited to FH-OFDMA based cellular systems aiming at low co-channel interference performance and optimized number of subcarriers.

• 한국IT서비스학회:학술대회논문집
• /
• 한국IT서비스학회 2002년도 추계학술대회
• /
• pp.425-430
• /
• 2002

Over the years, several different approaches have been proposed to enhance the practice of software reuse. These approaches vary in reuse abstraction levels or application domains they focus on. However, it seems that they do not adequately meet the needs of software designers in planning and managing reuse. One reason may be the lack of conceptually well-established framework supporting work domain analysis and modeling. As a new viable solution to this problem, Sutcliffe and his colleagues developed Domain Theory , which is introduced in this paper. Utilizing multidisciplinary perspective, such as cognitive psychology, management science, human-computer interaction, and software engineering. it provides a schematic framework that defines a comprehensive library of generic and reusable models of domain knowledge in terms of generic tasks and meta-domains. It also provides useful methods and guidelines for software reuse, emphasizing the concept of abstraction process in a designer s mind. This paper firstly gives a brief overview of fundamentals of software reuse. Next, it explains the foundation of domain theory and discusses its applicability to software reuse. In particular, the taxonomy of meta-domains and the types of generic tasks are described in more detail. Finally, the future research framework, which primarily addresses the problem of how to apply the domain theory to various work domains, is proposed.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2001년도 가을 학술발표논문집 Vol.28 No.2 (2)
• /
• pp.532-534
• /
• 2001

Code and object reuse is big concern for fast and efficient Virtual Reality (VR) system development. Many VR packages offer reasonably nice abstractions for various functionalities. That is, software reuse at the functional level is well practiced. Many geometry models are rarely used for main \"characters\" but mostly for incidental and decorative objects. This is because the main \"character\" objects usually exhibit certain behavior incompatible with the way the geometric model is organized. Kim has made a clear distinction between form, function and behavior[1]. This naturally lends to a reuse method at the level form, function and behavior.nction and behavior.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제34권4호
• /
• pp.303-316
• /
• 2007

소프트웨어 재사용을 위해 여러 가지의 접근법이 제시되어 왔으나，소프트웨어 개발자들은 이미 개발된 소프트웨어 컴포넌트를 재사용하는데 있어서 여전히 회의적이다. 여러 가지 원인이 있겠으나，기존의 재사용 접근법들이 개발자들이 재사용에 기울이는 노력을 감소시키는데 실질적인 도움을 주지는 못한 것이 가장 큰 원인 중 하나라고 볼 수 있다. 이러한 문제점 해결을 위해 본 논문에서는 RAS기반의 명세를 중심으로 컴포넌트의 다양한 측면을 활용하는 재사용 모델을 제시한다. 제시된 재사용 모델의 실용성 검증을 위해 실제적인 사례연구를 진행하였으며, 기존의 소스코드 기반의 소프트웨어 재사용 프로세스와 비교한 실험을 통해 재사용의 효율성 증가를 검증하였다. 이러한 검증을 통해，제안된 재사용 모델이 이미 개발된 기존 컴포넌트를 개발자들이 검색하고 이해하는데 소요되었던 시간을 감소시킴으로써 전반적인 재사용 소요비용 감소시키고 있음을 확인할 수 있었으며，제품라인공학과 같은 접근방법과 비교하여 일상적인 개발 공정의 지연을 초래할 수 있는 초기 투자비용을 최소화함에 따라，자발적인 개발자들의 참여를 끌어낼 수 있다는 점에서 차별성을 찾을 수 있다. 뿐만 아니라, 제안된 재사용 모델은 컴포넌트 기반 개발 방법론이나 제품라인공학과 같은 기존의 재사용 방법들과 배타적인 개념이 아니므로，필요에 따라 함께 적용하여 재사용 효과를 배가시킬 수 있을 것으로 기대한다.

• 대한치과보철학회지
• /
• 제45권5호
• /
• pp.644-652
• /
• 2007

Statement of problem: Resonance frequency analysis is evaluated as the non-invasive and objective method for the evaluation of implant stability and has been increasingly used. It is necessary to evaluate the factors affect the ISQ measurement stability. Purpose: This study was performed to evaluate the effect of the autoclave sterilization and reuse of $Smartpeg^{TM}$ on ISQ measurement. Material and methods: $SmartPeg^{TM}$ (Integration Diagnostics Ltd., $G\ddot{o}teborg$, Sweden) of autoclave group (A) was autoclave sterilized 9 times and $Smartpeg^{TM}$ of reuse group (R) was reused 9 times. Ten $SmartPeg^{TM}s$ were allocated to each group and after each autoclave sterilization and reuse, implant stability quotient (ISQ) values were measured 3 times from the two directions a and b at a right angle. $Osstell^{TM}$ mentor (Integration Diagnostics Ltd. $G\ddot{o}teborg$, Sweden) was used and type 1 (article no. 100353) $Smartpeg^{TM}$ was selected according to $Smartpeg^{TM}$ reference list. Osstem Implant US II future (Osstem Co., Seoul, Korea) in $4.0mm{\times}11.5mm$ was embedded in the self-curing acrylic resin ($Orthojet^{(R)}$, Lang Dental, U.S.A.). Data was statistically analyzed by one-way ANOVA $({\alpha}=.05)$ and scheffe test was done where a significant difference exist. Correlation test was also done between ISQ value and the number of autoclave sterilization or reuse. Results: 1. In autoclave group, the means and sd. of ISQ value before autoclave sterilization were $84.97{\pm}0.41,\;84.93{\pm}0.74$ at direction a and b. There was significant differences between autoclave groups at direction a and b (P=.000). 2. In reuse group, the means and sd. of ISQ value before reuse were $85.40{\pm}0.62,\;85.50{\pm}0.57$ at direction a and b. There was no significant difference between reuse groups at direction a and b (P>.05). 3. There was a weak positive correlation between the number of reuse and ISQ value at direction a and b (${\gamma}=.207$ and .246, P<.01). Conclusion: Within the limitations of this study, the following conclusions were drawn. Till ninth reuse of $Smartpeg^{TM}$, the ISQ measurement stability did not be affected. After twice autoclave sterilization of $Smartpeg^{TM}$ the ISQ measurement stability was affected.