• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.23 no.1
• /
• pp.34-40
• /
• 2014

There are several treatment options for rehabilitation of partial edentulism including the use of conventional or implant-retained fixed prostheses. However, such prosthetic options cannot always be possible because of compromised general and oral health (i.e. loss of supporting tissues, medical reasons, extensive surgical protocol and osseointegration failure of dental implant) as well as the affordability of patients. In some cases, removable partial denture provides easier access for oral hygiene procedures and the ability to correct discrepancies in dental arch relationships than implant fixed prosthesis. Recently, Implant Supported Removable Partial Denture (ISRPD) where to place dental implant in strategic position has been suggested to improve the limitation and shortcomings of conventional RPD. ISPRD can overcome mechanical limition of conventional RPD by placing implant in a favorable position and can be cost-effective, prosthetic solution for partially edentulous patients who are not immediate candidates for extensive, fixed implant supported restorations. Incorporation of dental implants to improve the RPD support and retention and to enhance patient acceptance should be considered when treatment planning for RPD. In this case, 59 years old male patient who received dental treatment of implant fixed prosthesis on both side of the upper jaw and implant overdenture on lower jaw showed implant abutment screw fracture on #15i and osseointegration failure on multiple number of implants. After removing failed implants, we planned ISRPD using #15i,24i,25i,26i and #23 natural tooth for RPD abutment. We fabricated #23 surveyed crown,#24i=25i=26i surveyed bridge and #15i gold coping for support,retention and stability for RPD. Periodic follow up check for 2years has been performed since the ISRPD delivery to the patient. No sign of screw loosening, fracture or bone resorption around abutment implants were detected.

• Horticultural Science & Technology
• /
• v.29 no.1
• /
• pp.16-22
• /
• 2011

In developing soil wetting agent using polyoxyethylene nonylphenyl ether (PNE) and polyoxyethylene castor oil (1:1; v/v), the effect of application rates on changes in concentration of PNE, initial wetting of peatmoss + perlite (7:3) medium, and growth of hot pepper (Capsicum annuum L. 'Knockwang') plug seedlings were investigated. The elevation of application rates of wetting agent increased the amount of water retained by the root media. The treatment of 2.5 $mL{\cdot}L^{-1}$ showed similar water retention to + control ($AquaGro^L$ 3.0 $mL{\cdot}L^{-1}$). Most of the liquid wetting agent (LWA) incorporated during the medium formulation leached out in the first and second irrigation, then it decreased gradually until 10 times in irrigation. In investigation of the influence of LWA on position of water infiltrating into root media, the vertical water movements in treatments of 0.5, 1.0, and 1.5 $mL{\cdot}L^{-1}$ were much faster than those in 0.0 $mL{\cdot}L^{-1}$ (-control), but relative speed of water movement decreased by the elevation in application rate of LWA to 2.0 or 2.5 $mL{\cdot}L^{-1}$. The evaporative water loss of root media that to contained various rate of LWA and irrigated to reach container capacity was the fastest in -control among the treatments and it delayed as the application rate of LWA was elevated. The plant height of 22.2 cm in 0.5 $mL{\cdot}L^{-1}$ and stem diameter of 3.26 mm in 1.0 $mL{\cdot}L^{-1}$ were the highest among the treatments tested. The treatment of 1.0 $mL{\cdot}L^{-1}$ also had the heaviest fresh and dry weights such among treatments tested as 3.08 g and 0.861 g per plant, respectively. The elevated application rate over than 1.5 $mL{\cdot}L^{-1}$ resulted in decreased seedling growth. The results mentioned above indicate that optimum application rate of LWA is 1.0 $mL{\cdot}L^{-1}$.

• Tuberculosis and Respiratory Diseases
• /
• v.56 no.1
• /
• pp.77-84
• /
• 2004

Background : We hypothesized that there was a relationship between body weight change and bronchodilator response (BDR) in patients with chronic renal failure (CRF) on hemodialysis (HD). Several mechanisms such as pulmonary edema due to water retention or increased permeability of alveolar capillary may play a important role in pulmonary function impairment and bronchial hyperresponsiveness in patients with CRF on HD. But, no studies have been published concerning BDR in patients with CRF on HD. This study was aimed to know the immediate effect of hemodialysis on pulmonary function and BDR in patients with CRF on HD. Methods : This study included 30 patients with CRF on HD. We collected data including age, sex, height, pretibial and pedal pitting edema, interdialysis weight gain, postdialysis weight loss, underlying diseases, duration of HD, $FEV_1$, FVC, $FEV_1/FVC$, and BDR before and after HD. Results : Interdialysis weight gain of the patients was $3.4{\pm}1.0kg$, and postdialysis weight loss was $3.2{\pm}0.7kg$. Before HD,$FEV_1$, FVC, and $FEV_1/FVC$ of the patients were $89{\pm}22%$, $86{\pm}19%$ of predicted, and $87{\pm}10%$. After bronchodilator inhalation, these parameters were changed to $95{\pm}22%$, $90{\pm}19%$ of predicted, and $88{\pm}9%$ respectively. BDR was positive in 15 patients. After HD, $FEV_1$, FVC, and $FEV_1/FVC$ of the patients were $100{\pm}23%$, $94{\pm}18%$ of predicted, and $88{\pm}11%$. After bronchodilator inhalation, these parameters were changed to $102{\pm}23%$, $96{\pm}18%$ of predicted, and $89{\pm}8%$ respectively. BDR was positive in 9 patients. Conclusion : First, HD increases $FEV_1$, FVC, and $FEV_1/FVC$ but little affects BDR. Second, there is no correlation between postdialysis weight loss and increases in $FEV_1$, FVC, and $FEV_1/FVC$ after HD. Third, there is also no correlation not only between interdialysis weight gain and BDR before HD but between postdialysis weight loss and BDR after HD.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.22 no.4
• /
• pp.172-186
• /
• 2017

Current study is a part of the efforts to assess the estuarine barrage effects on the coastal ecosystem induced by the Si flux changes. Surface sediments from Seomjin and Nakdong estuary and sediment cores from Nakdong estuary was analysed to investigate the effect of estuarine barrage on the distribution of grain size, organic matter (loss on ignition: LOI) and biogenic silica (BSi). The samples of Seomjin estuary were collected in March, 2015 and those of Nakdong estuary were collected in November, 2014. Generally, the longitudinal distribution of grain size, LOI and BSi in Seomjin estuary, natural estuary, was gradually changed. However mud (silt and clay), LOI and BSi increased from station mid-estuary where tide reaches year-round. The distribution of grain size, LOI and BSi in Nakdong estuary, however, were entirely different between inside and outside of estuarine barrage. The mud percentage and LOI were low and consistent in inside of the barrage except R05, inside of right gate, yet those of outside of the barrage were higher and varied by adjacent sluices. Mud, LOI and BSi of ND1 and ND2 decreased immediately after the construction of Nakdong estuarine barrage due to disturbance of sediment and decrease of sediment supply. To exclude the physical effects by the barrage, BSi excess ($BSi_{exc}$) was calculated using regression equation of BSi-LOI and BSi-mud of Seomjin estuary. $BSi_{exc}$ of Seomjin estuary decreased gradually from upper estuary to lower estuary. $BSi_{exc}$ of Nakdong estuary were positive in inside of the barrage and negative in outside of the barrage. BSi retention and shift of species composition of diatom by the barrage would affect $BSi_{exc}$ distribution. Before the construction of Nakdong estuarine barrage, $BSi_{exc}$ of ND2 was negative and consistent owing to high mud sedimentation. After the construction, $BSi_{exc}$ of ND2, however, fluctuated due to continuous disturbance of sediment due to construction of Eulsuk bridge and East gate.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.1
• /
• pp.29-37
• /
• 2011

Purpose: In cases when implant supported overdenture is made by using standard size implant, additional procedure such as bone surgery and bone grafting can be required. And it gives burden to doctor and patient in terms of cost. Therefore, it is necessary to find the implant therapy for the edentulous patients in making denture with accordable cost and simple procedure. Materials and methods: Edentulous patients with upper and lower dentures participated in this study. Before the operation, survey about patient's satisfaction to the existing dentures was carried out. Surgical procedures included four small diameter implants installation anterior area and immediate loading. One and three month after the procedure, the same survey about patient's satisfaction was carried out, and radiography was taken. Results: We are doing research to the nine patients. Survival rate is 97.2 percent. The comparison of patient's satisfaction before and after surgery is performed based on oral health impact profile 49. We analyze mainly with masticatory discomfort, retention, aesthetics, social problem, psychological discomfort problems. As a result, satisfaction level is increased at all factors. Retention is the most increased satisfactory factor followed by mastication difficulty, pronunciation, psychological discomfort, social discomfort, aesthetics in order. Marginal bone loss is 0.21 mm at 12 weeks after implant placement. Conclusion: This research reveals that the denture supported by mini dental implant increases patient's satisfaction. This study will be continued with more patients for a long time and we are scheduled for taking additional radiography to check whether peri-implant bone resorption occurs or not.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.426-438
• /
• 2023

Lithium-sulfur batteries, recently attracting attention as next-generation batteries, have high energy density but are limited in application due to sulfur's insulating properties, shuttle phenomenon, and volume expansion. This study used an economical and simple vacuum filtration method to prepare a freestanding electrode without a binder and collector. Carbon nanotubes (CNTs) are used to improve the electrical conductivity of sulfur, where CNT also acts as both collector and conductor. In addition, metal oxides (MO_x, M=Ni, Mg), which are easy to adsorb lithium polysulfide, are added to the CNT/S electrode to suppress the shuttle reaction in lithium-sulfur batteries, which is a result of suppressing the loss of active sulfur material due to the excellent adsorption of lithium polysulfide by metal oxides. The MO_x@CNT/S electrode exhibited higher capacity characteristics and cycle stability than the CNT/S electrode without metal oxides. Among the MO_x@CNT/S electrodes, the NiO@CNT/S electrode displayed a high discharge capacity of 780 mAh g^-1 at 1 C and an extreme capacity decrease to 134 mAh g^-1 after 200 cycles. Although the MgO@CNT/S electrode exhibited a low discharge rate of 544 mAh g^-1 in the initial cycle, it showed good cycle stability with 90% of capacity retention up to 200 cycles. Further, to achieve high capacity and cycle stability, the Ni_0.7Mg_0.3O@CNT/S electrode, mixed with Ni:Mg in the ratio of 0.7:0.3, manifested an initial discharge rate of 755 mAh g^-1 (1 C) and a capacity retention rate of more than 90% after 200 cycles. Therefore, applying binary metal oxides to CNT/S provides a freestanding electrode for developing economical and high-performance Li-S batteries, effectively improving lithium polysulfide's high capacity characteristics and dissolution.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.79-87
• /
• 2008

Many researchers have studied on rooftop greening that can be installed in abandoned spaces on a building roof. The most important issue in rooftop greening is the soil weight problem. The light greening materials are needed to solve this problem. Therefore, many alternative materials against the soil were investigated for rooftop greening. In this study, the waste wood chips and the waste paper slurry were evaluated as the lightweight vegetation foundation for rooftop greening. It also has a meaning for recycling of waste materials. The mixture ratio of waste wood chips to waste paper slurry for the board (the foundation of greening) was 60 to 40. The wet strength resin and the sizing agent were additionally added with different amount. After the forming of the board, physical and chemical properties were tested with the variation of wet strength resin and sizing agent. As the result of the test, the board with 15% of wet strength resin in the wet condition showed the highest strength. Futhermore, the moisture evaporation loss from the board surface with sizing agent was much lower than that from the board without sizing agent. Therefore, it was clear that the sizing agent was effective for water retention. The change of thickness in the wet condition was less than 1 mm, and it showed that the board is the predominant material on the dimensional stability. The average pH value of the board was ranged from 7.6 to 8.25.

• Korean Journal of Veterinary Research
• /
• v.37 no.2
• /
• pp.425-438
• /
• 1997

To assess the testicular toxicity induced by DA-125, a new anthracycline anticancer agent, the test substance was intraveneously administered to male beagle dogs at dose levels of 0, 0.0023, 0.0375, 0.15, and 0.6 mg/kg/day, 6 days a week for 26 weeks. At 0.6 mg/kg/day, 1 out of 3 dogs had died on day 42 of treatment and the other dogs were sacrificed on days 46 and 122 of treatment due to the increasingly severe clinical condition. Clinical signs considered to be related to treatment were included anorexia, vomiting, salivation, decreased activity, mucous and/or dark faeces, diarrhea, and swelling, abscess and/or ulceration of injection sites. Suppression in body weight gain, reduction in food intake, decreases in testicular weight and size, and hemorrhage of epididymis were also observed in male dogs. Microscopically, severe degenerative changes such as atrophy of seminiferous tubules, loss of germ cells, degeneration of germ cells, vacuolization of Sertoli cells, and hyperplasia of Leydig cells were observed in all dogs. Azoospermia in epididymal tubules, atrophy of epithelia in the cauda epididymis, and prostate atrophy were also found. At 0.15 mg/kg/day, anorexia, vomiting, salivation, diarrhea, and swelling of injection sites were observed. In addition, suppression in body weight gain and decreases in testicular weight and size were found in male dogs. Atrophy of seminiferous tubules, decrease of germ cells, degeneration, exfoliation and retention of germ cells, vacuolization of Sertoli cells, and hyperplasia of Leydig cells were observed by histopathological examination. Azoospermia in epididymal tubules and prostate atrophy were also found. At 0.0375 mg/kg/day, there were no clinical signs considered to be indicative of a reaction to treatment, but testicular size was significantly reduced. Microscopically, decreases in the number of spermatogonia and epidydimal speramtozoa were found. There were no evidences of general or testicular toxicity at 0.0023 mg/kg/day. These results indicate that DA-125 produces significant and persistent damage to the spermatogenic compartments of the testes in male beagle dogs.

• Food Science and Preservation
• /
• v.20 no.6
• /
• pp.766-774
• /
• 2013

The effect of storage temperatures ($0^{\circ}C$and $20^{\circ}C$) and packing functional film for fruit quality were examined in 'Fuyu' persimmon. The fresh weight loss was delay more effectively by the inhibition of transpiration when functional film was used. The firmness was effectively maintained in functional film packages at low temperature ($0^{\circ}C$), which might result from the beneficial combination of $CO_2$ and $O_2$. The soluble solid contents was higher with packing of functional film at $0^{\circ}C$ than at room temperature ($20^{\circ}C$). Highest $CO_2$ production in functional film bags was observed in room temperature storage after one week and thereafter declined sharply whereas lowest in 8 weeks. $CO_2$ concentration regardless of packing slowly increased to $5.2{\mu}L{\sim}10.2mL{\cdot}kg^{-1}{\cdot}h^{-1}$ until 8 weeks of low temperature due to persimmon respiration. Hunter 'b' value changed greatly yellowness according to temperature of storage but there were no significant differences among packaging treatments. Effects of functional film and low temperature in slower softening were consistent. This results suggested that the packing functional film at low temperature resulted in the best retention of quality market.

• The korean journal of orthodontics
• /
• v.36 no.4
• /
• pp.308-320
• /
• 2006

Rapid canine retraction, first introduced by Liou, is a distraction osteogenesis applied to the periodontal ligament tissue. Rapid tooth movement was facilitated by establishing minimal bony resistance on the distal surface of the canine by socket preparation and by osteogenesis on the mesial side in response to the periodontal distraction. Since undesired buccal tipping or extrusion of the canine during retraction tends to occur, it is crucial to maintain the firm path of movement and the axis of the canine during retraction. In order to improve the predictability of the canine movement, lingually extended distraction screws with heavy labial guiding wires were designed. Prefabricated plastic canine models for the estimation of socket depth and miniscrew implants for anchorage reinforcement were also devised. Applying these devices to a female patient with Class II anterior protrusion, the whole treatment was effectively finished in 13 months. Loss of vitality or periodontal problems did not occur throughout treatment, and stable occlusion was maintained during 10 months of retention. This case report demonstrates that a predictable rapid canine retraction can be achieved through the use of this modified technique.