• The Korean Journal of Food And Nutrition
• /
• v.32 no.2
• /
• pp.89-97
• /
• 2019

In this paper, quality properties and antioxidant capacity of cooked black carrot has been studied. Five different cooking methods have been applied: microwave (45 sec), boiling ($100^{\circ}C$, 14 min), steaming ($100^{\circ}C$, 20 min), sous vide ($75^{\circ}C$, 80 min), sous-vide ($95^{\circ}C$, 30 min). The color value was slightly different (p<0.05), the boiling method was the highest in L-value and Sous vide $75^{\circ}C$ method was the lowest. The steaming method indicated the highest a-value at 5.50. The b-value was significantly different between the samples (p<0.05). The microwave method was the highest at 3.49 while the sous vide $95^{\circ}C$ method was the lowest at -0.34. No significant difference was observed between the samples when only the moisture content results were considered. The highest pH was observed in samples cooked using the boiling method. The softening (%) was higher when the cooking water was in contact with samples and it was dependent on the temperatures. In addition, this study shows that not only temperature but also cooking time and cooking media are very crucial in the preparation and cooking of black carrot to prevent the loss of the antioxidant compound. In conclusion, the comparison of the quality characteristics and antioxidant properties of black carrots indicated that the most appropriate cooking method is sous-vide method.

• Journal of Korean Society of Disaster and Security
• /
• v.11 no.2
• /
• pp.83-89
• /
• 2018

The significant sedimentation at the estuary in the eastern coast of Korea frequently causes river mouth occlusion where disconnection between the river and sea is observed. River mouth occlusion causing watershed retention raises the environmental risk of the area as it impairs water quality and threatens the area's safety in the event of floods. This study proposes a plan to maintain stability of river channel and flow of flood discharge at the estuary with loss of its function for disaster prevention. To this end, the study tries to change the location and width of stream path, focusing on the center line of stream near the sand bar of river mouth. This allows to identify a shape of stream path that leads the most stable flow. To review the result, this study uses the SRH-2D, a model for two-dimensional hydraulic analysis, and conduct numeric simulation. The simulation result showed that the most effective plan for maintaining the stable flow of running water without having the area sensitive to changes in hydraulic characteristics is to lower the overall river bed height of the sand bar near the center line of stream to a equal level.

• Journal of Powder Materials
• /
• v.26 no.1
• /
• pp.49-57
• /
• 2019

Layered $LiNi_{0.83}Co_{0.11}Mn_{0.06}O_2$ cathode materials single- and dual-doped by the rare-earth elements Ce and Nd are successfully fabricated by using a coprecipitation-assisted solid-phase method. For comparison purposes, non-doping pristine $LiNi_{0.83}Co_{0.11}Mn_{0.06}O_2$ cathode material is also prepared using the same method. The crystal structure, morphology, and electrochemical performances are characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) mapping, and electrochemical techniques. The XRD data demonstrates that all prepared samples maintain a typical ${\alpha}-NaFeO_2$-layered structure with the R-3m space group, and that the doped samples with Ce and/or Nd have lower cation mixing than that of pristine samples without doping. The results of SEM and EDS show that doped elements are uniformly distributed in all samples. The electrochemical performances of all doped samples are better than those of pristine samples without doping. In addition, the Ce/Nd dual-doped cathode material shows the best cycling performance and the least capacity loss. At a 10 C-rate, the electrodes of Ce/Nd dual-doped cathode material exhibit good capacity retention of 72.7, 58.5, and 45.2% after 100, 200, and 300 cycles, respectively, compared to those of pristine samples without doping (24.4, 11.1, and 8.0%).

• The Journal of Korean Obstetrics and Gynecology
• /
• v.32 no.3
• /
• pp.57-72
• /
• 2019

Objectives: This study aims to assess the maternal characteristics and changes of body among patients who received Korean medicine postpartum care compared to pre-study. Methods: From January 1, 2018 to February 28, 2019, we included 31 postpartum patients who had body composition analysis at admission and discharge among 34 patients who received postpartum care in ${\square}{\square}$ University Hospital. We used SPSS 21.0 for window to test for statistical significance. Results: The average age, weight, and caesarean section rate increased compared to previous study. The average period of postpartum care has decreased. After postpartum care, abdominal circumference, body weight and Body Mass Index (BMI) was significantly decreased, but not as much as pre-study. The coefficient of determination was derived to predict the effects of postpartum care and calculated as "$Abdominal\;circumference\;change=2.745+0.593{\times}admission\;period$", "$weight\;change=0.214+0.345{\times}admission\;period$" and "$BMI\;change=0.198+0.120{\times}admission\;period$". Conclusions: Compared to previous study, as the maternal age increased and admission period decreased, the weight loss after childbirth decreased. It is necessary to provide individual treatment through coefficient of determination.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.1
• /
• pp.24-30
• /
• 2019

The successful results of the treatment using a double crown denture have been reported in several papers for some of the few remaining teeth in patient. In particular, double crown dentures may be an alternative to treatment in cases where the periodontal status is poor and clasp type removable partial dentures are inappropriate (crown/root ratio > 1). In this case, the patient visited clinic with a chief complaint of difficulty in mastication due to loss of posterior teeth and overall teeth mobility. After teeth with severe periodontitis were extracted, treatment plan of mandible is Kennedy class I removable partial denture (RPD) and treatment plan of maxilla is hybrid telescopic double crown RPD with a friction pin. Patient is well adapted after the prosthetic treatment and we report due to achieving satisfactory results in pronunciation, mastication, retention and aesthetics.

• Korean Journal of Medicinal Crop Science
• /
• v.27 no.2
• /
• pp.143-150
• /
• 2019

Background: Skin is an organ that protects the human body from various environmental stimuli that can induce immune system activation. Skin aging can be largely divided into two categories: physiological aging, which is caused by the a decreased physiological function of the skin and structural changes with aging, and photoaging, which is caused by the chemical stress induced by external stimuli such as ultraviolet (UV) radiation. Methods and Results: The objective of this study was to investigate the anti-wrinkle and UV protective effect of catechin-rich green tea extract (CGTE) in activated keratinocyte (HaCaT cells) and UV-induced skin damage in hairless mice. The results showed that CGTE inhibits the tumor necrosis factor-alpha interferon-gamma ($TNF-{\alpha}+IFN-{\gamma}$)-induced expression of matrix metalloproteinase (MMP)-1 in HaCaT cells. In addition, the CGTE treatment significantly reduced wrinkle formation, epidermal thickness, collagen deposition, and transepidermal water loss in dorsal skin irradiated with UVB. However, the ${\beta}$-glucosidase activity was significantly increased. The CGTE treatment inhibits mRNA expression and enzyme activity of MMP-2 and MMP-9 in the dorsal skin irradiated with UVB. Conclusions: It is expected that CGTE can be effectively used as a functional food and cosmetic ingredient to improve skin moisture retention and reduce wrinkle formation.

• Animal Bioscience
• /
• v.34 no.4
• /
• pp.621-632
• /
• 2021

Objective: This study was conducted to investigate the effects of supplementation with rumen-protected γ-aminobutyric acid (GABA) on carcass characteristics and meat quality of Hanwoo steers. Methods: Eighteen Hanwoo steers with an average initial weight of 644.83±12.91 kg were randomly allocated into three different groups. Each group consisted of 6 animals that were treated with different diets formulated based on the animals' body weights. The control (C) group was fed a basal diet consisting of concentrate and rice straw with 74% total digestible nutrients (TDNs) and 12% crude protein (CP). The two other groups were treatment groups; one group was fed a basal diet (74% TDNs and 12% CP) supplemented with rumen-protected GABA at a dose of 150 mg/kg feed, and the other group was fed a basal diet (74% TDNs and 12% CP) supplemented with GABA at a dose of 300 mg/kg feed. Results: The GABA supplementation significantly contributed to better growth performance (p<0.05), especially the weight gain and average daily gain. It also contributed to the lower cooking loss (p<0.05), improvements in essential antioxidant enzymes and stable regulation of antioxidant activities in the longissimus lumborum of Hanwoo steers, as represented by the lower formation of malondialdehyde content within the meat, the inhibition of myoglobin oxidation indicated by the retention of the oxymyoglobin percentage, and the suppression of metmyoglobin percentage during cold storage (p<0.05). Conclusion: Higher doses of GABA may not significantly promote better animal performance and meat quality, suggesting that dietary supplementation with GABA at a dose of 100 ppm is sufficient to improve the meat quality of Hanwoo steers.

• Journal of Electrochemical Science and Technology
• /
• v.15 no.1
• /
• pp.198-206
• /
• 2024

Given the high theoretical capacity (1,675 mAh g^-1) and the inherent affordability and ubiquity of elemental sulfur, it stands out as a prominent cathode material for advanced lithium metal batteries. Traditionally, sulfur was sequestered within conductive porous carbons, rooted in the understanding that their inherent conductivity could offset sulfur's non-conductive nature. This study, however, pivots toward a transformative approach by utilizing diatom shell (DS, diatomite)-a naturally abundant and economically viable siliceous mineral-as a sulfur host. This approach enabled the development of a sulfurlayered diatomite/S composite (DS/S) for cathodic applications. Even in the face of the insulating nature of both diatomite and sulfur, the DS/S composite displayed vigorous participation in the electrochemical conversion process. Furthermore, this composite substantially curbed the loss of soluble polysulfides and minimized structural wear during cycling. As a testament to its efficacy, our Li-S battery, integrating this composite, exhibited an excellent cycling performance: a specific capacity of 732 mAh g^-1 after 100 cycles and a robust 77% capacity retention. These findings challenge the erstwhile conviction of requiring a conductive host for sulfur. Owing to diatomite's hierarchical porous architecture, eco-friendliness, and accessibility, the DS/S electrode boasts optimal sulfur utilization, elevated specific capacity, enhanced rate capabilities at intensified C rates, and steadfast cycling stability that underscore its vast commercial promise.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.2
• /
• pp.39-45
• /
• 2024

The residual alveolar ridge below the denture base undergoes physiologic changes over time, which results in the existing dentures becoming less accurate with the residual alveolar ridge. In addition, changes of the occlusal plane, decreasing in vertical dimension and loss of denture retention and facial support can occur. Consequently, denture relining may be required to accommodate these changes and ensure an ongoing close fit. Relining a denture can be performed directly on the chairside using autopolymerizing relining materials or indirectly in the laboratory using heat-cured relining materials. A direct relining method is not only simple but also time and cost effective. However, irritation or burning sensation of the mucosa can occur, and poor bonding of the relining material to the denture base can be cited as disadvantages. The indirect relining method exhibits relatively high bonding strength between the relining material and the denture base, but the patient might experience discomfort during relining process period. This report will examine the characteristics of relining materials, including those used in the relining of CAD-CAM dentures, and explore the clinical considerations for relining procedures.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.1
• /
• pp.126-138
• /
• 2017

This study was conducted to investigate the potential of chicken feather (CF), which is a by-product in poultry industry, as a raw material of wood adhesives. For the purpose, adhesive resins were formulated with NaOH- and $H_2SO_4$-hydrolyzed CF as well as crosslinkers, and then the properties and water resistance of the adhesive resins against hot water were measured. CF was made of mainly keratin-type protein, and no or very low content of heavy metals was detected. Hydrolysis rate of CF increased as NaOH concentration in hydrolysis solutions increased. However, in order to minimize the loss of adhesive property of protein itself by the severe hydrolysis of CF and to seek its proper hydrolysis conditions, NaOH concentrations in hydrolysis solution determined to adjust to 5%, 7.5% and 10%. In the NaOH-hydrolyzed CF, $H_2SO_4$-hydrolyzed CF as a hardener and crosslinker were added to formulate CF-based adhesive resins. Solid content of the resins ranged from 28.3% to 44.8% depending on hydrolysis conditions and type of crosslinker. Viscosity of the resins at $25^{\circ}C$ was very high. However, when the temperature of the resins was increased to $50^{\circ}C$, the viscosity decreased greatly and thus the resins could be applied as a sprayable resin. Retention rate measured to evaluate the water resistance of adhesive resins was the highest in the cured resin formulated with 5% NaOH-hydrolyzed CF and 5% $H_2SO_4$-hydrolyzed CF of 10% based on the solid weight as a hardener. Retention rate depending on crosslinkers added into adhesive resins was the highest phenol-formaldehyde (PF) followed by melamine-urea-formaldehyde (MUF) and formalin. The retention rate of CF-based adhesives formulated with 5% NaOH-hydrolyzed CF, PF and $H_2SO_4$-hydrolyzed CF of 10% and over did not differ statistically from that of commercial MUF resins. All of CF-based adhesives formulated with PF as a crosslinker and one with 5% NaOH-hydrolyzed CF of 55%, 5% $H_2SO_4$-hydrolyzed CF of 15%, and MUF of 30% on the basis of solid weight could be substituted for commercial urea-formaldehyde resins, From the results, CF can be used as a raw material of wood adhesives if hydrolyzed in proper conditions.