• Food Science and Biotechnology
• /
• v.16 no.2
• /
• pp.187-192
• /
• 2007

The objectives of this study were to examine changes in the color and antioxidant compounds of paprika powder under various conditions, as well as to establish the suitable conditions for drying and storage. Paprika was dried using the following methods: freeze-drying, vacuum drying, far infrared-ray drying, and hot-air drying. Measurements of the moisture content, color pigments, and antioxidant compounds (total carotenoids, capsanthin, ascorbic acid, and total polyphenols) were completed during 120 days of storage at 4 and $30^{\circ}C$. We found that drying methods, storage temperatures, and packaging materials affected the American Spice Trade Association (ASTA) and Hunter color values, as well as the antioxidant content of paprika powder. There was a high correlation (r=0.87, p<0.01) between the ASTA color and the $a^*/b^*$ value. The loss of red color was closely related to the reduction of moisture content (r=0.81, p<0.01) during storage. Drying paprika with a low temperature in the absence of air resulted in better retention of the carotenoids and ascorbic acid. Also, as the retention of the carotenoids and ascorbic acid increased, the stability of the red pigment increased. Freeze-drying was found to be the most suitable drying method for the stability of the antioxidant compounds and red pigment.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.1
• /
• pp.19-24
• /
• 2017

Recently, flexible denture is widely used with some advantages such as esthetics, flexibility and biocompatibility. However, there is an opposite opinion about stability because of the movement of denture by the material's flexibility. As the denture moves to tissue surface during mastication, it irritates the supporting tissue. It can lead to trauma and rapid resorption of residual ridges if this irritation lasts for a long time. In this case, the patient has used flexible denture with insufficient stability, retention and support for several years and thus continuous irritation of the supporting tissue resulted in palate bone exposure. The patient discomfort and palate bone exposure underwent improvements by the new denture with stability and retention. A careful case selection for flexible denture, regular checkup and proper treatment are necessary to prevent the side effects.

• Korean Journal of Labor Studies
• /
• v.23 no.2
• /
• pp.169-193
• /
• 2017

This study analyzed the determinants that affect employment retention rate in order to diagnose dynamic employment stability in Korea. For this analysis, we constructed multi-level hierarchical data linking Workplace panel survey data and employment insurance job history data. And the determinants were analyzed using a multi-level analysis model suitable for these data. As result of the analysis, it is estimated that the employment stability is very low in Korea due to the widespread existence of the marginal sectors with low wage level and high level of nonstandard employment. In addition, the results of this analysis show that employment structure of Korea occupies considerable area of short-term employment where employment and unemployment are repeated, and overall employment stability is weak. This fact is likely to be a limiting factor for continued growth, as there is limited opportunity for skill development and skills formation at the corporate and individual levels. According to the results of this analysis, it is required to improve the quality of the employment structure for continuous growth and skill formation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.5
• /
• pp.24-30
• /
• 2010

Papermaking technology has drastically improved over the last 20 years to face new challenges. Because environmental regulations have become increasingly strict, papermaking systems have had to accommodate elevated recycled pulp content and an increased use of recycled process water. Process water in papermaking systems has become more dirtier and reduced polymer efficiency. Amphoteric PAM demonstrated a higher degree of stability in a high conductivity environment compared to cationic PAM. This was illustrated by the improved retention performance, particularly the ash retention. This amphoteric polymer can be used for board or newsprint production using recycled pulp, especially for the systems where polymer dissolving water is high in conductivity and degradation of cationic functional groups of cationic PAM can occur.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.389-396
• /
• 2019

In patients with severely resorbed alveolar bone, it is difficult to gain retention in denture. Lack of retention makes denture unstable and lead to trouble in using denture. Suction denture seals the entire denture border with movable mucosa and this sealing mechanism forms negative pressure beneath the denture and produce higher retention and stability to denture. In this case, 4 edentulous patients visited for lack of retention with dentures. Considering their high expectation with retention, suction denture concept was used to fabricate retentive and stable denture. The purpose of this case report is to compare and analyze the considerations of suction denture restorations in edentulous patients.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.6
• /
• pp.692-696
• /
• 1993

Prediction of retention times in transition metal-mandelate and transition metal-tartrate complex systems were studied on the cation exchanger. Plots of k' vs [mandelate] and k' vs [tartrate] were obtained under the condition of a constant competing cation concentration. The equation to predict the retention time of transition metal ion was derived from the ion exchange equilibria. Individual capacity factors (${k_1}',\;{k_2}'$) and stability constants ($K_1,\;K_2$) of the complexes were calculated from the non-linear least square method. Good resolution of the transition metals was predicted by the stepwise equation in the gradient method. The values of retention times from the calculation and the experiment agreed well each other.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.4 s.117
• /
• pp.1-9
• /
• 2006

Increasing the filler content of sheet provides an opportunity for saving production cost through fiber replacement with relatively low-priced filler. But increasing the filler content tends to decrease the strength of paper and filler retention. To overcome these problems, preflocculation technology of fillers has been suggested. To evaluate the effect cationic polymers on the size and size distribution of preflocculated GCC and their shear stability, cationic PAM and cationic starch were used. Results showed that cationic PAM formed large prefloc at low dosage. It was required to add 15 times as high as cationic starch to cationic PAM to obtain the same size prefloc. But preflocs formed with cationic starch was superior in shear stability to those formed with cationic PAM. With the increase of shear rate the size of preflocs decreased. Greater amount of small preflocs or un-flocculated fillers was observed when the dosage of polymers was low and this ended up low ash retention in handsheets.

• Journal of the Korean Geosynthetics Society
• /
• v.7 no.3
• /
• pp.31-40
• /
• 2008

The deformation behavior of the excavated behind ground due to the displacement shape of retention walls is predicted by numerical analysis, which can be performed using the artificial displacement method with elasto-plastic constitutive model. The displacement shape of the behind ground around the retention wall is similar to the displacement shape of the retention wall. However, far from the retention wall, it changes to the displacement shape of cantilever. The deformation (the settlement, the lateral movement) of the excavated behind ground can be decreased by restraining the upper displacement of the retention wall. The displacement shape of the retention wall due to excavation affects on the plastic failure zone and decreasing zone of stability of the excavated behind ground.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.150-154
• /
• 1987

A new mixed approximation method is proposed for the model reduction of high order linear and time-invariant dynamic systems. This method makes allowance for stability and feature retention simultaneously. After defining dominant frequency range which affects relative stability of systems, a part of denominator is obtained using the energy dispersion method and tests are obtained using dominant frequency response matching method. The proposed method reflects the characteristic of the original system more faithfully and guarantees absolute stability of the reduction model.

• Textile Coloration and Finishing
• /
• v.18 no.3 s.88
• /
• pp.23-30
• /
• 2006

The bending properties, wrinkle resistance, and fabric retention behaviors of cotton knitted fabrics in the wale and course directions were studied for their dependence upon resin finishing, knit structure, and washing cycles. Stiffness, wrinkle recovery angles, and dimensional stability were investigated before and after resin finishing and laundering. It has been found that any change in the physical properties of the knitted fabrics with respect to knit structure and fabric directions are related to accompanying modifications to the state of the fiber properties. The decrease of fabric shrinkage rates and wrinkle recovery properties from increasing laundering cycles is related with resin incorporated on the fiber surface. This study shows that resin finishing on knitted fabrics can be performed only to improve fabric retention properties with reduced wrinkle recovery properties.