• Journal of Convergence for Information Technology
• /
• v.11 no.6
• /
• pp.188-197
• /
• 2021

In this study, the optimal conditions for hair dyeing using sappan wood (Caesalpinia sappan L.) powder were determined, and then the effect of chitosan treatment on the hair dyeing properties of sappan wood powder was investigated. Treatment of sappan wood powder and water with the ratio of 1:3 (w/w) at 40℃ for 60 minutes was found to be the most effective to hair dyeing. In addition, the pretreatment of low molecular weight (~30 kDa) chitosan at a concentration of 1% (w/w) prior to treatment with sappan wood powder effectively improved and maintained the hair dyeing properties of sappan wood. In conclusion, the low molecular weight chitosan is considered to be of great help as a mordant in improving the dyeing efficiency and retention of sappan wood powder in hair dyeing.

• Journal of Powder Materials
• /
• v.28 no.6
• /
• pp.462-469
• /
• 2021

Tin/graphite composites are prepared as anode materials for Li-ion batteries using a dry ball-milling process. The main experimental variables in this work are the ball milling time (0-8 h) and composition ratio (tin:graphite=5:95, 15:85, and 30:70 w/w) of graphite and tin powder. For comparison, a tin/graphite composite is prepared using wet ball milling. The morphology and structure of the different tin/graphite composites are investigated using X-ray diffraction, Raman spectroscopy, energy-dispersive X-ray spectroscopy, and scanning and transmission electron microscopy. The electrochemical properties of the samples are also examined. The optimal dry ball milling time for the uniform mixing of graphite and tin is 6 h in a graphite-30wt.%Sn sample. The electrode prepared from the composite that is dry-ball-milled for 6 h exhibits the best cycle performance (discharge capacity after 50^th cycle: 308 mAh/g and capacity retention: 46%). The discharge capacity after the 50^th cycle is approximately 112 mAh/g, higher than that when the electrode is composed of only graphite (196 mAh/g after 50^th cycle). This result indicates that it is possible to manufacture a tin/graphite composite anode material that can effectively buffer the volume change that occurs during cycling, even using a simple dry ball-milling process.

• Korean Journal of Food Science and Technology
• /
• v.54 no.2
• /
• pp.163-170
• /
• 2022

Aronia (Aronia melanocarpa cv. Viking) contains high amounts of anthocyanins, which are susceptible to heat. This study was conducted to identify an efficient coating material for encapsulating aronia extract to enhance the stability of anthocyanins during cooking. Maltodextrin, maltodextrin+gum Arabic, and maltodextrin+carboxymethyl cellulose were chosen as the coating materials, mixed with aronia extract at a ratio of 2:1, and freeze-dried after homogenization. The encapsulated aronia extract was then used as a sulgidduk ingredient. Sulgidduk prepared with the encapsulated aronia had significantly higher values for redness, anthocyanin retention, total phenolic content, and antioxidant activity compared to sulgidduk prepared with non-encapsulated aronia. In addition, the sensory evaluation revealed that sulgidduk prepared with encapsulated aronia produced better color and taste. These results indicate that the encapsulation of aronia extract improved the stability of the anthocyanins in aronia, and encapsulated aronia can be used as a functional colorant in the food industry.

• Journal of Convergence for Information Technology
• /
• v.12 no.4
• /
• pp.338-344
• /
• 2022

It is necessarily required in developing Si-based anode materials for lithium ion batteries, and the related researches are actively working especially in Si-carbon composite material. On the other hand, the photovoltaic and semiconductor industries discard huge amount of Si resources, facing the environmental issue. In this study, recycled Si resource is adopted to obtain Si-carbon composite for LIB(Lithium-Ion Batteries). In order to improve high-capacity retention characteristics and cycle stability of a Si anode material for the LIB, two differenct composites having a mass ratio of silicon and pitch of 1:1 and 2:1 are synthesized and electrochemical characteristics of the anode material manufactured by simple self-assembly method. This result in excellent initial capacity with stable cycle life, and confirming the potential use of recycled Si material for LIB.

• Journal of Animal Science and Technology
• /
• v.64 no.5
• /
• pp.854-862
• /
• 2022

The purpose of this study is to determine the impact of different levels of crude protein (CP) diets supplemented with dietary protease on the growth performance and nutrient digestibility of the weanling pigs. In a 5-week study, 100 crossbred ([Landrace × Yorkshire] × Duroc) of weaner pigs that have an average initial body weight (BW) of 7.17±1.06 kg were assigned to one of four dietary treatments with 5 replications and 5 pigs (3 gilts and 2 castrated male pigs) per pen in a randomized complete block design. The dietary treatments were as follows: Phase 1: CON: basal diets (20.60% CP); low protein (LP): CON - 0.30% CP; PLP1: (CON - 0.30% CP) + 0.05% protease; PLP2: (CON - 0.50% CP) + 0.05% protease. Phase 2: CON: basal diets (18.88% CP); LP: CON - 0.30% CP; PLP1: (CON - 0.30% CP) + 0.05% protease; PLP2: (CON - 0.50% CP) + 0.05% protease. The addition of protease to low CP diets significantly increased the feed conversion ratio (FCR) (p = 0.039), BW (p = 0.046), average daily gain (ADG) (p = 0.049), and average daily feed intake (ADFI) tended to increase (p = 0.053) in the young pigs during phase 1. However, FCR tended to increase throughout the experiment but did not change during phase 2, whereas BW, ADG, and ADFI stayed unchanged throughout phase 2 and overall. There was no significant difference in dry matter, nitrogen (N), and gross energy of nutrient digestibility in all phases and overall in weaned pigs with low CP when protease was fed. In contrast, adding protease to the low CP diets increased the tendency of N digestibility (p = 0.059) during phase 1. It is concluded that dietary protease supplementation tended to increase N retention during the first phase of the weaning period, hence increasing piglet performance.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.439-445
• /
• 2022

In this study, Silicon and petroleum pitch were coated on the surface of Si/C fiber manufactured using electrospinning to improve the electrochemical performances. SiO₂/PAN fiber was prepared by electrospinning with TEOS and PAN at various ratios dissolved in DMF. The characteristics of carbonization, reduction, and pitch coating processes were investigated for the optimal process of the pitch coated Si/C fiber anode composite. Anode composite prepared with TEOS/PAN = 4/6 (CR-46) after carbonization and reduction process has a capacity of 657 mAh/g. To improve capacity and stability, Si powder and PFO pitch were coated at the surface of CR-46. When the pitch composition was fixed at 10 wt%, it was found that the capacity increased as the weight ratio of silicon increased, but the stability decreased. The pitch coated Si/C fiber composite with 10 wt% silicon has high capacity of 982.4 mAh/g and capacity retention of 86.1%. In the test to evaluate rate performance, the rate capability was 80.2% (5C/0.1C).

• Journal of Electrochemical Science and Technology
• /
• v.13 no.2
• /
• pp.199-207
• /
• 2022

Lithium-sulfur batteries (LSBs) have emerged as a promising alternative to lithium-ion batteries (LIBs) owing to their high energy density and economic viability. In addition, all-solid-state LSBs, which use solid-state electrolytes, have been proposed to overcome the polysulfide shuttle effect while improving safety. However, the high interfacial resistance and poor ionic conductivity exhibited by the electrode and solid-state electrolytes, respectively, are significant challenges in the development of these LSBs. Herein, we apply a poly (ethylene oxide) (PEO)-based composite solid-state electrolyte with oxide Li₇La₃Zr₂O₁₂ (LLZO) solid-state electrolyte in an all-solid-state LSB to overcome these challenges. We use an electrochemical method to evaluate the degradation of the all-solid-state LSB in accordance with the carbon content and loading weight within the cathode. The all-solid-state LSB, with sulfur-carbon content in a ratio of 3:3, exhibited a high initial discharge capacity (1386 mAh g^-1), poor C-rate performance, and capacity retention of less than 50%. The all-solid-state LSB with a high loading weight exhibited a poor overall electrochemical performance. The factors influencing the electrochemical performance degradation were revealed through systematic analysis.

• Journal of Science Education
• /
• v.46 no.3
• /
• pp.266-277
• /
• 2022

We analyzed the responses of 152 science-gifted high school students by surveying the status and recognition of writing and keeping laboratory notebooks to develop guidelines and education plans. Science-gifted students did not write laboratory notes diligently, despite recognizing that it is crucial to do so. Mentors also tended not to provide faithful guidance and inspection. There was an insufficient practice in using research evidence in laboratory notebooks, such as including names and dates for authentication. In addition, while a high ratio of students owned their own laboratory notebooks, there was not a high level of recognition regarding the retention period, ownership, and responsibility. Based on these results, we propose suggestions for improving educational institutions for gifted students in science. First, it is necessary to strengthen the guidance for science-gifted students to faithfully write laboratory notebooks. Second, education on writing laboratory notebooks should be provided. Third, science-gifted high schools should prepare regulations for the management of lab notes and conduct education based on them.

• Animal Bioscience
• /
• v.36 no.10
• /
• pp.1584-1595
• /
• 2023

Objective: This study was conducted to evaluate the effect of a low-protein diet on growth performance, carcass traits, nutrient digestibility, blood profiles, and odor emissions in growing-finishing pigs. Methods: A total of 126 crossbred pigs ([Yorkshire×Landrace]×Duroc) with an average body weight (BW) of 38.56±0.53 kg were used for a 14-week feeding trial. Experimental pigs were allotted to one of 6 treatments in 3 replicates of 7 pigs per pen in a randomized complete block design. Pigs were fed each treatment diet with different levels of crude protein (CP). Phase 1 (early growing): 14%, 15%, 16%, 17%, 18%, 19%; phase 2 (late growing): 13%, 14%, 15%, 16%, 17%, 18%; phase 3 (early finishing): 12%, 13%, 14%, 15%, 16%, 17%; phase 4 (late finishing): 11%, 12%, 13%, 14%, 15%, 16%. All experimental diets in each phase were contained the same concentration of lysine (Lys), methionine (Met), threonine (Thr), and tryptophan (Trp). Results: Over the entire experimental period, there was no significant difference in BW, average daily feed intake, and gain-to-feed ratio among all treatments (p>0.05), but a quadratic effect (p = 0.04) was observed in average daily gain (ADG) during the late finishing phase with higher ADG in Group D. Blood urea nitrogen concentration linearly increased with an increase in dietary CP levels (p<0.01). Regarding nutrient digestibility, excreted nitrogen in urine and feces and nitrogen retention linearly increased as the CP level increased (p<0.01). A linear effect was observed with increasing CP levels in amines, ammonia, and hydrogen sulfide in odor emissions (p<0.01). No significant effects were observed in the measurements of carcass traits and meat characteristics (p>0.05). Conclusion: In phase feeding, reducing the CP level to 14% in early-growing pigs, 13% in late-growing pigs, 12% in early-finishing pigs, and 11% in late-finishing pigs is recommended.

• Analytical Science and Technology
• /
• v.19 no.1
• /
• pp.18-30
• /
• 2006

This paper describes the cumulative deposition of fallout Pu in soil and lichen at the present time and give the characteristics of fallout Pu deposits in the soil. In the soil of the forest, the accumulated depositions of $^{239,240}Pu$ were estimated to be in the range of 34.0 to $101.2Bq\;m^{-2}$ with an average value of $65.3{\pm}21.6Bq\;m^{-2}$. The average inventory of $^{239,240}Pu$ in the forest was calculated to be two times higher than that in the hill. Also, the deposited activities of $^{239,240}Pu$ in cultivated soil were significantly lower than those in the hill or forest. However, the cumulative depositions of fallout Pu in the volcanic ash soil on Cheju Island were much higher than those in the forest and hill soils. The measured activity concentrations of Pu isotopes in lichens and mosses showed large variations, due to characteristics of species and life span of lichen and moss colonies. From depth profiles, it was found that most of the fallout Pu has been accumulated in upper 10 cm layer of soil. Except for a few cases, the concentrations of $^{239,240}Pu$ in soil tended to decrease exponentially with increasing soil depth. Among parameters affecting the cumulative deposition of fallout Pu, organic substances and rainfall play an important role in the retention and relative mobility of fallout Pu in the soil. However, pH showed a weak correlation with the deposition of fallout Pu in the soil. From sequential leaching experiments, Pu was found to be associated predominantly with the "organic" and "oxy-hydroxy" fractions. Both the activity ratios of $^{238}Pu/^{239,240}Pu$ and $^{241}Pu/^{239,240}Pu$ in soils, lichens and mosses and the atomic ratios of $^{240}Pu/^{239}Pu$ in soils are close to those observed in the cumulative deposit global fallout from nuclear weapon testings. The results obtained from this research make it possible to interpret and predict the behavior of fallout Pu under natural conditions.