• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.1
• /
• pp.43-57
• /
• 2002

This paper introduces an analysis method to predicting the flow characteristic of flow field around otter board In order to develope a high performance model. In this experiment, it is used a numerical analysis of flow field through CFD(Computational Fluid Dynamic), PIV method in which quantitative, qualitative evaluation is possible. In this experiment, it is used PIV method with flow filed image around otter board in order to analysis of flow characteristic. The result compared flow pattern with analysis result through CFD and also measurement result of lift and drag force coefficient carried out in CWC(Circulating Water Channel). The numerical analysis result is matched well with experiment result of PIV in the research and it is able to verify In the physical aspect. The result is as follows ; (1) It was carried out visibility experiment using laser light sheet, and picture analysis through PIV method in order to analysis fluid field of otter-board. As a result, the tendency of qualitative fluid movement only through the fluid particle's flow could be known. (2) Since PIV analysis result is quantitative, this can be seen in velocity vector distributions, instantaneous streamline contour, and average vorticity distributions through various post processing method. As a result, the change of flow field could be confirmed. (3) At angle of attack 24$^{\circ}$ where It Is shown maximum spreading force coefficient, the analysis result of CFD and PIV had very similar flow pattern. In both case, at the otter-board post edge a little boundary layer separation was seen, but, generally they had a good flow (4) As the result of post processing with velocity vector distributions, instantaneous streamline contour and average vorticity distributions by PIV, boundary layer separation phenomenon started to happen from angle of attack 24$^{\circ}$, and from over angle of attack 28$^{\circ}$, it happen at leading edge side with the width enlarged.

• The Journal of the Korea Contents Association
• /
• v.20 no.11
• /
• pp.228-236
• /
• 2020

As of March 2020, this study divided the applications for young children installed on Android-based smart-phones in Korea into top and bottom groups according to review scores, and selected 30 applications each, conducted content analysis and application evaluation, and looked at differences between groups. Through this, by providing objective information on the smart-phone application for young children, it is intended to help parents and early childhood education professionals select high-quality applications, and to present ideas and directions for developing applications suitable for development to application developers. As a result of application content analysis, only data presentation type, simulation type, and game type were found in all the top and bottom groups as for the application type. There was a difference in order. In the case of app purchase cost, the top group in the review score was evenly distributed from the low price to the high price of 100,000 won or more, while the bottom group had few high-priced applications. On the other hand, as a result of application evaluation, a significant difference was found in the entire evaluation score, including all functional elements and all content elements, between the top and bottom groups of the review score. In the case of detailed sub-factors, significant differences were shown in all factors except 'technicality' of functional elements.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.4
• /
• pp.366-374
• /
• 2014

This study assessed and analysed a result of a product design experiment through Product Data Analytics (PDA), to find reasons for failure of some projects in the experiment. PDA is a computer-based data analysis that uses Product Data Management (PDM) databases as its operational databases. The study examines 20 product design projects in the experiment, which are prepared to follow same product development process by using an identical PDM system. The design result in the PDM database is assessed and analysed by On-Line Analytical Processing (OLAP) and data mining tools in PDA. The assesment and analysis reveals the lateness in creation of 3D CAD models as the main reason of the failure.

• The Journal of the Korea Contents Association
• /
• v.16 no.8
• /
• pp.592-600
• /
• 2016

AAPM CT performance for special medical equipment quality control checks using a standard phantom for evaluation, using the evaluator's subjective assessment as to minimize errors due computerized assessment program to evaluate their usefulness. Phantom for evaluation AAPM CT Performance Phantom: was used, the default shooting conditions are the same as quality control checks. And, we use IMAGE J to evaluate the program. Quantitative evaluation with CT attenuation coefficient and the noise measurement, the uniformity measurement, the slice thickness measurement, contrast resolution of the measurement, a phantom image of the spatial resolution determined by the evaluation program is evaluated as self-extracting the result after processing the image, CT uniformity measurement for the evaluation that was smaller and the standard deviation of a video image processing more uniform slice thickness measurements it is difficult to evaluate due to the difference of the ratio of the measured value of the phantom image. Contrast resolution was measured cylindrical diameter 6th evaluate the shape of a circle obtained a mean value and a standard deviation of diameters, the spatial resolution of the group of source, including acceptance criteria automatically extracted result as a result of both the number of the extracted circularIt appeared. Evaluate the source image and video processing, and video to qualitative evaluation by gross were processed video image is shown excellent results. If the evaluators in order to minimize the errors of subjective judgment based on the results of the above should be done with a quantitative evaluation and qualitative evaluation utilizes a computerized assessment program is considered that further evaluation be made more efficient.

• The Journal of the Korea Contents Association
• /
• v.15 no.6
• /
• pp.125-135
• /
• 2015

As the elderly and the disabled populations increase, the importance of the universal design is more highlighted to form equal and secured environment. Particularly, as the desire for the cultural experience has grown, investment and construction of the cultural space are actively carried forward at the state level, but there are a lot of restrictive elements for the disadvantaged to have the cultural experience in the public facilities. To analyze these elements, investigation into the present conditions and analysis of use evaluation were conducted over the construction environment of museums, the public cultural space, in terms of the visually handicapped and non-handicapped people. Through the literature review, this study understood the concept and principle of the universal design, analyzed and reclassified the existing evaluation elements. As a result of evaluating museums in the country based on the analyzed evaluation elements, the information, environment and supplement points in service were investigated for the visually handicapped to tour museums and remedies were drawn. This study tries to consider these disadvantaged and to suggest evaluation elements and remedies for environment construction, so that everyone can do pleasant activities.

• Journal of Korean Society of Rural Planning
• /
• v.29 no.4
• /
• pp.105-116
• /
• 2023

In this study, evaluation indicators for quantitative and qualitative indicators were presented by resetting the evaluation indicators for the selection of the living conditions renovation project for vulnerable residential areas by reflecting the results of expert importance. The appropriateness of the project selection evaluation index was reviewed by comparing the results of the expert AHP importance survey to make the project sustainable and to discover vulnerable villages. Evaluation items were constructed based on the guidelines for selecting the target site, and AHP importance evaluation was performed using this evaluation item as a proxy variable. Based on the data collected from 152 villages in Gimhae-si for case studies, the evaluation results were derived by applying the existing guideline evaluation indicators and evaluation indicators reflecting the importance proposed in this study. As a result of the study, Overall, there was a positive correlation between the results of the existing guideline evaluation and the results of the AHP importance survey, but in detail, there is a difference in the results evaluated by the two evaluation methods. In the future, if the scope of participating experts is expanded to supplement the importance evaluation, and the evaluation grade is set by analyzing quantitative data from Gyeongsangnam-do or rural areas nationwide, local governments and others will use this evaluation index as basic data when promoting the project.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.786-789
• /
• 2004

For the accurate evaluation of traffic noise with various spectrums and fluctuation characteristics, evaluation systems should reflect not only physical quantities but also the psychological respects of individual persons. In this study, adequate words for evaluating traffic noise have been extracted by reviewing the existing vocabularies and augmenting this with the results of a questionnaire prepared especially for apartment dwellers. As a result of this study, followings are suggested. 1) Vocabularies such as 'disagreeable', 'annoying', 'strident', 'disturbed', 'irritate', 'unpleasant', 'dislike' are classified into the first factor by factor analysis. 2) As a result of surveying overlapping vocabularies for each sound sources, 'noisy', 'annoying', strident', 'unpleasant', 'loudness' are main unpleasant vocabularies to franc noise occurring in our domestic apartment houses.

• Journal of Korean Association for Spatial Structures
• /
• v.21 no.1
• /
• pp.87-94
• /
• 2021

The purpose of this paper is to improve the inappropriate analysis results when the end of the brace on braced frame is applied as pinned connection in practice. The stiffness of the gusset plate connection on the braced frame has the amount of between pinned and rigid connection, and the analysis model that applies the stiffness of the connection must be used for accurate performance evaluation. In this study, the stiffness of the gusset plate designed by the balanced design procedure are quantified, and applied to the analysis model to simulate the gusset plate connection. The proposed model was verified through nonlinear static analysis (pushover analysis) of SAP2000. The effect of the connection on the seismic performance of the braced frame was analyzed by comparing the proposed model and pinned model. As a result, it was confirmed that the performance of the braced frame was evaluated conservatively in practice, and the ductility was overestimated. Therefore, it is important to consider the connection for accurate and economical performance evaluation.

• Journal of Mechanical Science and Technology
• /
• v.19 no.12
• /
• pp.2245-2252
• /
• 2005

Thermal stratification in the branch piping of power plants can be generated by turbulent penetration or by valve leakage. In this study, a numerical analysis was performed to estimate the thermal stratification phenomenon by in-leakage in the SIS branch piping of nuclear power plant. Leakage rate, leakage area and leakage location were selected as evaluation factors to investigate the thermal stratification effect. As a result of the thermal stratification effect according to leakage rate, the maximum temperature difference between top and bottom of the horizontal piping was evaluated to be about 185K when the valve leakage rate was about 10 times as much as the allowed leakage rate. For leakage rate more than 10 times the allowed leakage rate, the temperature difference was rapidly decreased due to the increased mixing effect. In the result according to leakage area, the magnitude of temperature difference was shown in order of $3\%,\;1\%\;and\;5\%$ leakage area of the total disk area. In the thermal stratification effect, according to the leakage location, temperature difference when leakage occurred in the lower disk was considerably higher than that of when leakage occurred in the upper disk.

• Journal of Technologic Dentistry
• /
• v.21 no.1
• /
• pp.55-65
• /
• 1999

So far, I Conducted an examination with focus on the type, characteristic, and test methods of impact test. which is a type of mechanical that evaluate materials. As mentioned previously, in testing soldering strength of soldering is the load when the object under experiment is broken down with the result of flexibility test or peel test. In this method, a hevay load is necessary until alloy of parent metal is bended, if the alloy of the parent metal has a large mechanical quality(peel strength or resisting power). Once the alloy of the parent metal is bended, however, it tends to come into pieces abruply form the part where soldered. Therefore, a metal has a high breakdown value if the degree of strength of its parent metal is high even if the result of measurement indicates otherwise. Thus, the result of the test did not correspond to the clinical result. Therefore, this study concludes as the following from a test of strength of soldering by mean of conducting an impact test, which is a type of mechanical evaluation methods : 1. Among various impact tests, a charpy thpe is more appropriate than the izod type in testing strength of soldering. 2. As far as test piece is concerned, to use subsized impact test piece is appropriate in the impact test in that it does not have notch. 3. In the matter of analysis, it is appropriate to measure absorbing energy which results from rupture of test piece.