• Journal of Digital Contents Society
• /
• v.17 no.5
• /
• pp.409-416
• /
• 2016

Recently, Big Data issue has become a buzzword and universities, industries and research institutes have been efforts to collect, analyze various data enabled. These things includes accumulated data from the past, even if it is not possible to analysis at this present immediately a which has the potential means. And we are obtained a valuable result from the collected a large amount of data via the semantic analysis. The demand for high-performance storage system that can handle large amounts of data required is increasing around the world. In addition, it must provide a distributed parallel file system that stability to multiple users too perform a variety of analyzes at the same time by connecting a large amount of the accumulated data In this study, we identify the I/O bandwidth of the storage system to be considered, and performance of the metadata in order to provide a file system in stability and propose a method for configuring the optimal environment.

• Spatial Information Research
• /
• v.23 no.5
• /
• pp.75-85
• /
• 2015

Recently deformed or destroyed of soundproof wall by local winds and typhoon has increased. This research proposed the estimation method of the design wind load of soundproof wall using spatial information analysis based on 1:5,000 digital map and performed comparative analysis with actual application cases. According to the result of quantitative evaluation using GIS, the surface roughness in the downtown area packed with buildings was III and the surface roughness in the suburban district with a relatively small number of buildings was II and the surface roughness in the district packed with open areas and typical farmhouses was I. This shows that the wind load of the soundproof walls reflecting the actual surface conditions was estimated. If the quantitative GIS analysis presented in this study is applied to wind-resistant design of soundproof walls, it is supposed that this will be helpful in more rational wind-resistant design by remedying the existing problem in which the wind load varies depending on designer's subjectivity.

• The KIPS Transactions:PartC
• /
• v.19C no.2
• /
• pp.91-98
• /
• 2012

OLAP(On-Line Analytical Processing) is a tool to satisfy the requirements of managing overflowing data analysis. OLAP can provide an interactive analytical processing environment to every end-user. Security policy is necessary to secure sensitive data of organization according to users direct access database. But earlier studies only handled the subject in its functional aspects such as MDX(Multidimensional Expressions) and XMLA(XML for Analysis). This research work is purported for solving such problems by designing and implementing an efficient data access control mechanism for the information security on OLAP. Experimental evaluation result is proposed and its efficiency and accuracy are verified through it.

• The KIPS Transactions:PartD
• /
• v.8D no.6
• /
• pp.861-870
• /
• 2001

Since most of studies for information efficiency measurement of healthcare organizations have mainly focused on searching a measuring standard used for performance of informatization and each researchers subjective standard having been used, they can not be easily measured and objective. This study showed a possibility that efficiency measurement of healthcare organization can be performed by solving a problem related to objectiveness, which may occur in measuring many organization with many measuring items, with DEA (data envelopment analysis). For proving this possibility, efficiency evaluation and analysis for information resources utilization of domestic tertiary healthcare organizations have been performed by using DEA model. As a result, DMU (decision making unit) having efficiency rate of 1 will be evaluated that output is higher than input and information resources are being used efficiently, but on the other hand, DMU having efficiency rate of below 1 will be evaluated that output is lower than input and information resources are being used inefficiently, which is required to be improved.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.5
• /
• pp.93-102
• /
• 2009

A prediction of streamflow based on multi-objective function is presented to check the performance of Probability Distributed Model(PDM) in Miho stream basin, Chungcheongbuk-do, Korea. PDM is a lumped conceptual rainfall runoff model which has been widely used for flood prevention activities in UK Environmental Agency. The Monte Carlo Analysis Toolkit(MCAT) is a numerical analysis tools based on population sampling, which allows evaluation of performance, identifiability, regional sensitivity and etc. PDM is calibrated for five model parameters by using MCAT. The results show that the performance of model parameters(cmax and k(q)) indicates high identifiability and the others obtain equifinality. In addition, the multi-objective function is applied to PDM for seeking suitable model parameters. The solution of the multi-objective function consists of the Pareto solution accounting to various trade-offs between the different objective functions considering properties of hydrograph. The result indicated the performance of model and simulated hydrograph are acceptable in terms on Nash Sutcliffe Effciency*(=0.035), FSB(=0.161), and FDBH(=0.809) to calibration periods, validation periods as well.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.4
• /
• pp.157-168
• /
• 2018

Recently, the occurrence of typhoons and heavy rainfall is increasing due to climate change. This causes increase in possibility of landslide damages in rural areas. However, in reality, the precise engineering stability assessment studies are still insufficient. Therefore, in order to reduce the landslide damages and effectively manage mountainous areas, the development of disaster prevention techniques is needed. In this study, to analyze the shock absorbing effect of the buffer-spring during application of dynamic impact load in the debris flow protection system, numerical analysis is carried out for each free field of the buffer-spring and the load sharing ratio of the buffer-spring is also examined. In addition, the field applicability is verified by comparison of the tensile strength of the conventional buffer-spring and the wedge type buffer-spring on various magnitudes of dynamic impact load. As a result of the study, it is found that the net-type debris protection system is effective to mitigate loss of properties and human lifes during landslide.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.2
• /
• pp.41-48
• /
• 2018

This study is expected to provide some basic data on how to apply more economical and efficient eco-friendly factors to reduce the carbon emissions. It has been scrutinized and analyzed the environmental factors of passive eco-friendly elements along with active eco-friendly elements as more efficient factors for energy conservation based on the case of a newly constructed broadcasting building with the green building certification in Sangam-dong DMC area. The first analysis was the energy consumption trends in Korea and the necessity of energy saving. Secondly, it was examined the energy consumption in the current status of the broadcasting building. Thirdly, it was looked into the correlation between the eco-friendly design application factors applied to the broadcasting building and the energy consumption types. As a result of the analysis, the application of fan and feed pump inverter along with ventilation system of waste heat recovery ventilation system were more meaningful in accordance with the economic feasibility of broadcasting buildings rather than economical effect of passive elements such as rooftop garden, reinforcement of building insulation. Also, the application of lighting control had the economical feasibility. Therefore, when it is intended to change the green building certification energy related evaluation items of the similar broadcasting building types, it is necessary to change the direction of adding weight to the more economical active element items in the future.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.9
• /
• pp.45-52
• /
• 2022

Because discontinuity in the rock mass and contact of soil-structure interaction exhibits coupled thermal-hydromechanical (THM) behavior, it is necessary to develop an interface element based on the full governing equations. In this study, we derive force equilibrium, fluid continuity, and energy equilibrium equations for the interface element. Additionally, we present a stiffness matrix of the elastoplastic mechanical model for the interface element. The developed interface element uses six nodes for displacement and four nodes for water pressure and temperature in a two-dimensional analysis. The fully coupled THM analysis for fluid injection into a fault can model the complicated evolution of injection pressure due to decreasing effective stress in the fault and thermal contraction of the surrounding rock mass. However, the result of hydromechanical analysis ignoring thermal phenomena overestimates hydromechanical variables.

• Structural Engineering and Mechanics
• /
• v.86 no.5
• /
• pp.589-605
• /
• 2023

This paper investigates the ductility demands of steel frames equipped with self-centring fuses under near-fault earthquake motions considering multiple yielding stages. The study is commenced by verifying a trilinear self-centring hysteretic model accounting for multiple yielding stages of steel frames equipped with self-centring fuses. Then, the seismic response of single-degree-of-freedom (SDOF) systems following the validated trilinear self-centring hysteretic law is examined by a parametric study using a near-fault earthquake ground motion database composed of 200 earthquake records as input excitations. Based on a statistical investigation of more than fifty-two (52) million inelastic spectral analyses, the effect of the post-yield stiffness ratios, energy dissipation coefficient and yielding displacement ratio on the mean ductility demand of the system is examined in detail. The analysis results indicate that the increase of post-yield stiffness ratios, energy dissipation coefficient and yielding displacement ratio reduces the ductility demands of the self-centring oscillators responding in multiple yielding stages. A set of empirical expressions for quantifying the ductility demands of trilinear self-centring hysteretic oscillators are developed using nonlinear regression analysis of the analysis result database. The proposed regression model may offer a practical tool for designers to estimate the ductility demand of a low-to-medium rise self-centring steel frame equipped with self-centring fuses progressing in the ultimate stage under near-fault earthquake motions in design and evaluation.

• Journal of the Korean Institute of Educational Facilities
• /
• v.12 no.5
• /
• pp.35-46
• /
• 2005

It has been almost 20 years since Korea has started the research of school facilities, but there has not been any form of organized information or studies done about such a trend of the research. In this respect, this research places its focus on categorizing 44 policy studies initiated and proceeded by different organizations for last twenty years(1983-2004) and 186 volumes of the research about education facility plans and projects released by journal of Architectural Institute of Korea and journal of Korean Institute of Educational Facilities in 17 subjects of this study. It also concentrates on organizing data based on different levels of schools and periods of time as well as understanding the trend. The result of this research is followings. Considering every volume of the paper and the subjects that have previously been treated in those papers, the trend of this study is divided into the first stage of research period(1983-1993), the second stage of research period(1994-2001), and the third stage of research period(2002-present). Of all the papers, there has been the most number of papers objecting elementary schools(110 volumes, 56.1%), and most of them focused on space formation, size, and the present situation of utilization of each classroom in elementary schools. In the meantime, the studies about educational information, application of the media, space formation and size under teachers'consent, two-dimension types, a design of outdoor space(including gardens), the present situation of utilization, remodeling of school facilities, an evaluation of space and recognition-awareness analysis have been mainly done since 1995. Such a result mentioned above provides a sense of understanding about a level of studies about education facilities in our country, and as a basic source for future guidelines of studies and contents, in my personal opinion, it contains a high level of application.