• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.7
• /
• pp.1303-1313
• /
• 2001

This study was performed to develop a mobile functional pattern reflecting the characteristics of the middle aged women's lower body types based on the slacks construction components. The results and procedures obtained from this study were as follows; 1. The bodys measurement of the 252 middle aged women of 45∼59 years old were used to analyze the size and somato type. 2. For multiple analysis of the lower body types, horizontal and vertical section maps were obtained by sliding gauge method and extracted constructional factors of slacks. 3. The following condition was determined with both standing and moving position of body: (gradient of C.B.L/2)+3°and (back crotch extention)+2cm. 4. Development of new slacks pattern drafting was based on the result of data analysis. Trough the wearing test by the sensory evaluation, It showed that developed slacks pattern was judged better than existing patterns in items of comfort of comfort of silhouette and moving.

• Journal of Engineering Education Research
• /
• v.19 no.2
• /
• pp.26-33
• /
• 2016

A camp program where the theory of inventive problem solving TRIZ is applied to real problems of the industry was developed and taught at a five-day seminar apart from the standard curriculum at a university D in Gyeonggido. This study focuses on the educational effect that the TRIZ method has on the engineering students when their creative problem solving skills are required to solve industry problems on their own with the knowledge from their courses. For five days, the students were educated about TRIZ and assigned a real industry problem "Removal of friction caused by bubble formation in water heating pipelines". By applying TRIZ to the problem, the students developed an "Air removing Air Arrester" which received the evaluation, "with understanding the system architecture and the task objective causes and formation of the problem could be handled which directly helps the company's R&D". In this case, TRIZ offers the students a guideline and knowledge on how to approach problems and as a result the students provided a practical solution. During the process, the TRIZ method instilled confidence in the students and proved to be a motivation. It becomes obvious that this short-term program has a positive effect on students' way of thinking creatively and increasing their problem-solving abilities.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.119-126
• /
• 2012

Recently, the breakdown of online banking servers and the leakage of customer information give rise to much concern about the security of information systems in financial and banking companies in Korea. The enforcement of security for information system becomes much more important issue than earlier. However, the security reinforcement of information system is restricted by a budget. In addition, the activities' cost to secure information system from threatening are under uncertain circumstances and should be established by a human decision maker who is basically uncertain and vague. Thus, making the budget for information system is exposed to any extent of the risk for these reasons. First, we introduce brief fuzzy set theory and fuzzy AHP (Analytic Hierarchy Process) methodology. Then, the cost elements that comprise yearly budget are presented and the priorities among the cost elements are calculated by fuzzy AHP. The cost elements that are exposed to risk are evaluated from the both perspectives of the risk impact and risk occurrence possibility which are expressed as linguistic terms. To get information on the risk profiles-pessimistic, most likely, and optimistic-for each cost element, the evaluation is accomplished and the result is presented. At last, the budget ranges-minimum, mode, maximum-for each cost element are estimated with the consideration of the risk profiles.

• The Research Journal of the Costume Culture
• /
• v.12 no.1
• /
• pp.28-40
• /
• 2004

The purpose of this study was (1) to identify the experimental bias which could appear person perception as results of development methods (2) to find out the most desirable method in developments of stimulus. The research was a quasi experiment and the subjects were 358 male and female undergraduate students by convenient sampling. The experimental instruments consisted of a set of stimulus and semantic differential scales of 7-point bi-polar adjectives. The collected data were analyzed by Principle Component Analysis, ANOVA(analysis of variance), Scheffe's multiple range test. The independent variables were developing methods of stimulus(live person, photography of real person, 2 kinds of black and white line drawing, 2 kinds of color drawing). The results were as follows. First, five factors which were potency, sociality, appearance, evaluation, activity impressional dimensions emerged to account for the methods of development of stimulus. Second, the methods of development of stimulus had significant effects on potency, sociality, appearance, activity factors. In sociality factors, the impression of photographic stimulus was the closest to the live person's impression. However in the appearance and activity impressions, significant difference existed between live person and other developing stimulus. In the potency impression, black and white line-drawing gave the highest impressional bias. In the sociability and appearance impressions, color-drawing stimulus gave the highest impressional bias. Result: On conclusion the developments of stimulus can effect on stimulus person's impressions and these effects can produce experimental biases, the photographic stimulus gave the least impressional bias. The study shows that photography of real person will produce minimize measurement error.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.1 s.232
• /
• pp.107-114
• /
• 2005

In order to analyze the elastic-plastic fracture behavior of a structure, the fracture resistance curve of the material should be known first. The standard CT specimen was used to obtain the fracture resistance curves of a piping system. However, it is known that the fracture resistance curve by the standard CT specimen is very conservative to evaluate the integrity of a structure. Also the fracture resistance curve is effected by the specimen geometry and the dimensions because of the constraint effect. The objective of this paper is to be certain the conservativeness of the fracture resistance curve by the standard CT specimen and to provide an additional safety margin. For these, the fracture tests using a real pipe specimen and the standard CT specimen test were performed. A 4-point bending jig was manufactured for the pipe test and the direct current potential drop method was used to measure the crack extension and the length for the pipe test. Also finite element analyses were performed with a CT specimen and a pipe in order to prove the additional safety margin. From the result of tests and analyses of the pipe and the standard CT specimen, it was observed that the fracture analysis with the standard CT specimen is conservative and the additional safety margin was proved.

• Earthquakes and Structures
• /
• v.10 no.3
• /
• pp.717-733
• /
• 2016

Trapezoidal Cemented Sand and Gravel Dam, namely Trapezoid CSG, is a new type of dam. Due to lack of dynamic studies in the field of CSG dam, this research was performed to analyze Trapezoidal CSG dam using dynamic Finite element method with ABAQUS Software. To investigate possible earthquake-induced damages, fragility curves are plotted based on damage index, the length of the cracks created at the dam base and the area of cracked elements in the dam. The seismic analysis indicated that minimum and maximum tensions are generated in the heel and toe of the dam, respectively. According to the fragility curves, with increase in PGA, the possibility of the exceeding the defined limit state is increased. However, the rate of increment is significantly reduced after PGA=0.4 g. Also, the same result is achieved for the second limit state. The "area of cracked elements" is more conservative criterion than the "crack length at the dam base", especially at PGA<0.4 g. As conclusion, CSG dams, despite of being made of poor materials in comparison with concrete dams, show good resistance, and even in some situations, better performance than the weighted concrete dams.

• Earthquakes and Structures
• /
• v.25 no.5
• /
• pp.307-323
• /
• 2023

This study compares two prominent design provisions, National Design Specification (NDS) and Eurocode 5, on load-carrying capacity calculations and failure analysis for mortise-tenon joints. Design procedures of double-shear connection from both provisions were used to calculate load-carrying capacity of mortise-tenon joints with eight different bolt sizes. From this calculation, the result was validated using finite element analysis and failure criteria models. Although both provisions share similar failure modes, their distinct calculation methods significantly influence the design load-carrying capacity values. Notably, Eurocode 5 predicts a 6% higher design load-carrying capacity for mortise-tenon joints with varying bolt diameters under horizontal loads and 14% higher under vertical loads compared to NDS. However, the results from failure criteria models indicate that NDS closely aligns with the actual load-carrying capacity. This indicates that Eurocode 5 presents a less conservative design and potentially requires fewer fasteners in the final timber connection design. This evaluation initiates the potential for the development of a wider range of timber connections, including mortise-tenon joints with wooden pegs.

• Korean Journal of Organic Agriculture
• /
• v.15 no.4
• /
• pp.355-376
• /
• 2007

This study evaluated economic feasibility to find a method that can increase income of a rape farmer for biodiesel. Biodiesel is one of an important bioenergy that can be used to substitute diesel-fuel. A rape is useful not only for biodiesel, but also for a substitute of a barley. This study deals with the income and cost data of a rape farmer compare to that of a barley farmer. According to the result of economic evaluation from 2002 to 2006, the income of a rape farmer for biodiesel incurred a loss. However, this study showed that the income of a rape farmer would be approximately 80% of that of a barley farmer if a new variety of rape called 'SUNMANG' was growed. Also, biodiesel has various ancillary effects such as by-product, preservation of a scenery, reduction of $CO_2$, etc. If the income of a rape farmer had ancillary effects, it would exceed the income of a barley farmer. As a result, we need to support ancillary effects of a rape to encourage a rape farmer for biodiesel.

• Journal of Digital Contents Society
• /
• v.12 no.1
• /
• pp.69-75
• /
• 2011

A clustering process for nodes in a network is required to find communities from social networks. General clustering algorithm needs to be configured the number of communities in advance. The number of communities is a very important element because the result of clustering can be different, depending on it. In this paper, we define the external community relationship which is distinguished between communities. Using the external community relationship as an evaluation metric of clustering result, we propose a method to determine the number of communities dynamically. We compare the proposed method to existing methods based on the accuracy of the number of communities and the average purity of communities. Our results show favorable performance for these criteria compared to the existing methods that were evaluated.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.12
• /
• pp.1543-1551
• /
• 2010

A major aim of cattle genome research is to identify candidate genes associated with meat quantity and quality through QTL analysis for application in the livestock industry. Therefore, this study focused on discovery of useful SNPs within the LOC534614 gene, containing 12273_165 SNP which is located on the same site as the QTL on chromosome 6, and evaluation of the association between SNP and body weight and cold carcass weight in Hanwoo (Korean cattle) As a result of a BLAST search of the NCBI web site, we discovered that the mRNA sequence of the LOC534614 gene was similar to that of the coiled-coil domain containing 158 (CCDC158) for dog and human. According to the direct DNA sequence from the CCDC158 gene, we identified 19 polymorphic SNPs within exons and their flanking regions. Among them, 17 polymorphic SNPs were selected for genotyping in Hanwoo (n = 476) and seventeen marker haplotypes containing 12273_165 SNP (frequency >0.1) were identified. As a result of the association between 17 polymorphic SNPs and Hanwoo (n = 476), g.8778G>A SNP in exon 6 was found to be a non-synonymous SNP, and was significantly associated with body weight and cold carcass weight (p<0.05). We discovered 19 polymorphic SNPs in the CCDC158 gene on the QTL region of BTA 6 in Hanwoo and identified that the g.8778G>A SNP was significantly associated with body weight and cold carcass weight (p<0.05), which causes an amino acid variation from valine to methionine. Furthermore, statistical analysis demonstrated that the CCDC158 gene is strongly associated with body weight and cold carcass weight in Hanwoo. In this regard, the g.8778G>A SNP in the CCDC158 gene can be useful as a positional candidate for body weight and cold carcass weight for marker-assisted selection in Hanwoo.