• 제목/요약/키워드: Result Analysis and Evaluation

Search Result 5,763, Processing Time 0.039 seconds

Reliability of Computerized Measurement of Laryngeal Erythema (후두 발적에 대한 컴퓨터 평가 시스템의 신뢰도 연구)

  • Moon, Byoung-Jae;Nam, Soon-Yuhl;Kim, Sang-Yoon;Choi, Seung-Ho
    • Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
    • /
    • v.16 no.1
    • /
    • pp.19-22
    • /
    • 2005
  • Background and Objectives : While considerable progress has been made in enhancing the quality of laryngoscopy and image processing, the evaluation of laryngeal erythema is still based on the clinician's judgement. The purpose of this study is to quantitatively measure the degree of erythema and to examine the relationship with clinical grading. Materials and Methods : Color images of larynx from 100 subjects were captured from video-documented examinations of laryngoscopy. The amount of erythema within the digitized larynx image was quantified using software developed and was compared with a grading system (0 to 3 scale) based on visual inspection by 4 experienced clinicians. The results were compared by deriving Kappa, Kendall and Spearman statistic. Results : There was high intra-observer(R=0.402-0.755) and inter-observer correlation (R=0.789). Among parameters, the red composite value had most remarkable agreement with clinical grading(R=0.827). Conclusion : The result suggest that the computer based analysis of laryngeal erythema can provide quantiative data on degree of erythema and the basis for further development of an expert system.

  • PDF

The safety behavior of agricultural reservoirs due to raising the embankment

  • Lee, Dalwon;Lee, Younghak
    • Korean Journal of Agricultural Science
    • /
    • v.40 no.3
    • /
    • pp.243-252
    • /
    • 2013
  • This study was carried out to investigate safety evaluation of agricultural reservoirs due to raising the embankment. The seepage analysis and large-scale model test were performed to compare and analyze the pore water pressure(PWP), leakage quantity, settlement and piping phenomenon in the inclined core type and the vertical core type embankments. The PWP after raising the embankment showed smaller than before raising the embankment and the stability for piping after raising the embankment. The allowable seepage quantity and the allowable leakage for the steady state and transient conditions is within the range of safe management standard. After raising the embankment in the inclined core, there was no infiltration by leakage. For the vertical core, the PWP showed a large change by faster infiltration of pore water than in the inclined core. In a rapid drawdown, inclined core was remained stable but the vertical core showed a large change in PWP. Settlement after raising the embankment showed larger amounts of settlement than before raising the embankment. The leakage quantity before raising the embankment and the inclined core type showed no leakage. From the result, an instrument system that can accurately estimate a change of PWP shall be established for the rational maintenance and stabilization of raising the embankment for agricultural reservoirs.

The Improvement Effectiveness of Computational Thinking through Scratch Education

  • Shin, Soo-Bum
    • Journal of the Korea Society of Computer and Information
    • /
    • v.20 no.11
    • /
    • pp.191-197
    • /
    • 2015
  • Recently, it has been activated the software education or coding education for the improvement of the Computational Thinking (CT) ability at home and abroad. Also the CT has influence on courses of Computer Science in the college levels. It has been introduced and the number of cases of using it to general K12 education has increased. However, the research on the software education's influence on the CT was still lacking. So In this paper, we proposed this study has been conducted on how Scratch education in the elementary school level influenced the ability of the CT. And we proposed software education can improve the ability of CT. First, we provided the theoretical base of the software education and evaluation process through analysis of computational thinking ability. A core analysis content of the CT is broader than algorithmic thinking and can be achieved without using computer. It includes abstract, algorithmic, logical, and measurable thinking. Second, we made efforts to improve the characteristics of the software education with categorization. Finally, we have managed the software education using Picoboard with Scratch and flowchart within 15 weeks based on these theocratical research. An examination of the effectiveness was committed to understand, analyze, and develop strategies of problem solving. It is designed as a strategy of problem solving before and after the software lesson. The result of the software education has improved authentically in all areas without the need to design a strategy for problem solving.

Development and Evaluation of Video English Dictionary for Silver Generation (실버세대를 위한 동영상 영어사전의 개발 및 평가)

  • Kim, Jeiyoung;Park, Ji Su;Shon, Jin Gon
    • KIPS Transactions on Software and Data Engineering
    • /
    • v.9 no.11
    • /
    • pp.345-350
    • /
    • 2020
  • Based on the analysis of physical and learning characteristics and requirements of the silver generation, a video English dictionary was developed and evaluated as English learning contents. The video English dictionary was developed using OCR as an input method and video as an output method, and 17 silver generations were evaluated for academic achievement, learning satisfaction, and ease of use. As a result of the analysis, both the text English dictionary and the video English dictionary showed high learning satisfaction, but the video English dictionary showed higher results than the text English dictionary in an academic achievement and ease of use.

Relationship between diet quality and sarcopenia in elderly Koreans: 2008-2011 Korea National Health and Nutrition Examination Survey

  • Na, Woori;Kim, Jiyu;Chung, Bong Hee;Jang, Dai-Ja;Sohn, Cheongmin
    • Nutrition Research and Practice
    • /
    • v.14 no.4
    • /
    • pp.352-364
    • /
    • 2020
  • BACKGROUND/OBJECTIVES: Given the increasing proportion of the Korean population that is aged 65 years and older, the present study analyzed the relationship between diet quality and sarcopenia in elderly persons by using data from the 2008-2011 Korea National Health and Nutrition Examination Survey (KNHANES). SUBJECTS/METHODS: Data for 3,373 persons aged 65 years and over (men: 1,455, 43.1%) were selected from the 2008-2011 KNHANES. Sarcopenia assessments are based on a formula that divides a subject's appendicular skeletal muscle mass (ASM) by their weight (wt) and multiplies that result by 100 ([ASM/wt] × 100). Sarcopenia is present if the subject's result was less than one standard deviation (SD) below the sex-specific mean for a young reference group. For evaluation of diet quality, data obtained via the 24-hour recall method were used to calculate the Diet Quality Index for Koreans (DQI-K). A general linear model was applied in order to analyze general information and nutritional intake according to sarcopenia status. For analysis of the relationship between diet quality and sarcopenia, a binominal logistic regression analysis was undertaken. RESULTS: The sarcopenia prevalence rate among the study subjects aged 65 years and over was 37.6%. The DQI-K of those without sarcopenia was 3.33 ± 0.04 points, while that of those with sarcopenia was 3.45 ± 0.04 points (P < 0.05). The relationship between diet quality and sarcopenia revealed that subjects aged 75 and older had a poor diet quality, and their odds ratio (OR) of sarcopenia presence was significantly higher (OR: 1.807, 95% confidence interval: 1.003-3.254, P < 0.05). CONCLUSIONS: This study revealed that poor diet quality was related to sarcopenia presence in Koreans aged 75 and older. In order to improve the diet quality of the elderly (aged 75 and older), it is necessary to develop dietary improvement guidelines.

The Effect Analysis of Teacher Training Program to Enhance Scientific Creative Problem Solving Abilities (과학 창의적 문제 해결력 신장을 위한 초등교사 연수 프로그램에 대한 평가)

  • Paik, Seoung-Hey;Kim, Jung-Eun
    • Journal of Gifted/Talented Education
    • /
    • v.23 no.2
    • /
    • pp.133-160
    • /
    • 2013
  • The purposes of this research are to develop and to evaluate the teacher training program for enhancing scientific creative problem-solving abilities. For this purpose, by considering previous studies, this study suggested 'scientific creative problem solving process'. In the course of elementary teacher program development, the present study followed Instructional Systems Development stages, where Kirkpatrick's four-step evaluation model was applied for a quality of evaluation. As a result of evaluation, it was found that teachers' recognition of competency to teach the scientific creative problem solving process was increased. In addition, teachers' evalution of the program was positive and their willingness to apply it to the field was found high, which indicated that the training program's applicability to schools would be positive.

Remanufacturing Process Design for Automotive Alternator (자동차 교류발전기의 재제조 프로세스 설계)

  • Roslan, Liyana;Azmi, Nurul Ain;Jung, Won
    • Journal of Korean Society of Industrial and Systems Engineering
    • /
    • v.34 no.4
    • /
    • pp.179-188
    • /
    • 2011
  • This paper outlines a systematic guideline for remanufacturing process using the Failure Mode and Effect Analysis (FMEA) method in order to estimate the reliability and quality of the remanufactured alternator. The method is just a tool to help, but the remanufacturer must determine the optimal remanufacturing process and specific inspection and production that will turn the alternator as-good-as new and place the product into the market with reliability and quality equal to a new product. FMEA is a method that is widely used in industry and has shown its value and effectiveness in the above remanufacturing case study. Actions taken often result in a lower severity, occurrence or detection rating. Redesign may result in lower severity and occurrence ratings while inserting validation controls and maintenance can reduce the detection rating. The revised ratings are recorded with the originals on the FMEA template form. After these corrective actions and revisions have been established, evaluation of the ranks can be repeated, until the redesign and control parameters comply with safety standards.

Evaluation of Flexural Capacity of Reinforced Concrete Irregular Walls Based on Existing Experimental Data (기존 실험데이터를 통한 철근콘크리트 이형벽체의 휨내력식 평가)

  • 문경신;하상수;최창식;이원호;이리형
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2001.05a
    • /
    • pp.845-850
    • /
    • 2001
  • The primary objective of this study is to develop the new equation that can predict the flexural strength of irregular walls by applying the concept of the effective width which is used in current codes. Results obtained from this data analysis are as follows : 1. It is conservative to use PCI provision and ACI code as the effective width for evaluating the flexural capacity of irregular walls 2. The result of this study shows that the Paulay & Priestley's proposition is available for more exactly and safely predicting flexural capacity of irregular walls throughout a reduction factor.

  • PDF

Evaluation of a Loss of Residual Heat Removal Event during Mid-Loop Operation

  • Seul, Kwang-Won;Bang, Young-Seok;Lee, Sukho;Kim, Hho-Jung
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1996.05b
    • /
    • pp.23-28
    • /
    • 1996
  • The potential for the RELAP5/MOD3.2 was assessed for the loss-of-RHR event during the mid-loop operation and the predictability of major thermal-hydraulic phenomena was also evaluated for the long term transient. The analysis results of the typical two cases(cold leg opening case and pressurizer opening case) were compared with experimental data which was conducted at ROSA-IV/LSTF in Japan. As a result, it was shown that tile code was capable of simulating the thermal-hydraulic transport process with appropriate time step during the reduced inventory operation with the loss-of- RHR system.

  • PDF

Construction of Personal Computer CAE System Support to Insulation Design (절연설계(絶緣設計)를 지원(支援)하는 Personal CAE 시스템의 구축(構築))

  • Choi, Young-Chan;Ohsima, Hirotsugu;Ohyama, Ryu-Ichiro;Kaneko, Kiyoji
    • Proceedings of the KIEE Conference
    • /
    • 1992.07b
    • /
    • pp.922-924
    • /
    • 1992
  • This paper presents a CAE(Computer Aided Engineering)system for solving electrostatic field problems by means of a small size computer such as a personal computer. The system software operated on the personal computer is composed of a CAD(Computer aided Design), electric field analysis by using FEM(Finite Element Method)and DB(Data Base)of insulating materials. In addition, we discuss an application of the system to analyzing electric field such as parallel plate electrodes with an insulation spacer, which result suggests that the visualization of electric field distribution and tolerance for insulation strength enables us to assure a simplified evaluation of the insulating design.

  • PDF