• Journal of Korean Library and Information Science Society
• /
• v.54 no.3
• /
• pp.193-221
• /
• 2023

The purpose of this study is to identify how teacher librarians perceive the importance of each job and the expected job of other teachers and students, and to obtain basic information on their job recognition and to derive their jobs to be improved. To this end, after modifying the 25 jobs selected by Lim Jeong-hoon et al.(2021), 210 librarian teachers were measured for their own importance by job, the expected importance of other teachers and students, and the level of evaluation of their own performance ability. As a result of the analysis, teacher librarians recognized 'reading education and literacy education' as the most important, but recognized 'library event' as the most important task expected of other teachers and students, and recognized that 'library usage guidance' was the most outstanding. In addition, there were nine jobs that needed to be improved.

• International Journal of Highway Engineering
• /
• v.17 no.6
• /
• pp.11-18
• /
• 2015

PURPOSES : The purpose of this thesis is to evaluate the effectiveness of an active noise cancellation (ANC) system in reducing the traffic noise level against frequencies from the predictive model developed by previous research. The predictive model is based on ISO 9613-2 standards using the Noble close proximity (NCPX) method and the pass-by method. This means that the use of these standards is a powerful tool for analyzing the traffic noise level because of the strengths of these methods. Traffic noise analysis was performed based on digital signal processing (DSP) for detecting traffic noise with the pass-by method at the test site. METHODS : There are several analysis methods, which are generally divided into three different types, available to evaluate traffic noise predictive models. The first method uses the classification standard of 12 vehicle types. The second method is based on a standard of four vehicle types. The third method is founded on 5 types of vehicles, which are different from the types used by the second method. This means that the second method not only consolidates 12 vehicle types into only four types, but also that the results of the noise analysis of the total traffic volume are reflected in a comparison analysis of the three types of methods. The constant percent bandwidth (CPB) analysis was used to identify the properties of different frequencies in the frequency analysis. A-weighting was applied to the DSP and to the transformation process from analog to digital signal. The root mean squared error (RMSE) was applied to compare and evaluate the predictive model results of the three analysis methods. RESULTS : The result derived from the third method, based on the classification standard of 5 vehicle types, shows the smallest values of RMSE and max and min error. However, it does not have the reduction properties of a predictive model. To evaluate the predictive model of an ANC system, a reduction analysis of the total sound pressure level (TSPL), dB(A), was conducted. As a result, the analysis based on the third method has the smallest value of RMSE and max error. The effect of traffic noise reduction was the greatest value of the types of analysis in this research. CONCLUSIONS : From the results of the error analysis, the application method for categorizing vehicle types related to the 12-vehicle classification based on previous research is appropriate to the ANC system. However, the performance of a predictive model on an ANC system is up to a value of traffic noise reduction. By the same token, the most appropriate method that influences the maximum reduction effect is found in the third method of traffic analysis. This method has a value of traffic noise reduction of 31.28 dB(A). In conclusion, research for detecting the friction noise between a tire and the road surface for the 12 vehicle types needs to be conducted to authentically demonstrate an ANC system in the Republic of Korea.

• Journal of Environmental Impact Assessment
• /
• v.16 no.4
• /
• pp.267-275
• /
• 2007

In this study, relationship between the air pollution of Siheung city and the relative contribution of automobiles to the city's pollution was evaluated for the first time. Then, new air pollution exposure index was developed through simulation. Using the newly developed index, two different urban development scenarios were compared to present a sustainable urban development plan to reduce air pollution from the land utilization point of view. According to the result of this simulation, air quality of the city was found to be affected significantly by human activities. More populated area showed worse level of air quality. Any development in the city resulted in more automobile activity and deterioration of air quality. This simulation result thus explains that a rapid increase of automobiles accompanied by the land development near local roadsides in the city is the major cause of air pollution in Siheung city. In this study, if urban activities are vigorous in an area with high air pollution, people are more likely to be exposed to air pollutant under the bad environmental conditions. On the other hand, if urban activities are less vigorous in an area with high pollution or if urban activities are vigorous in an area with less pollution, the environmental condition was positive. The APEI (Air Pollution Exposure Index) was developed based on these considerations. Scenarios 1 and 2 were compared and analyzed using APEI. In result, scenario 1 is the case in which land is developed and used in an environmentally favorable manner. From this study, it was proved that the impact of air pollution on human health can be minimized with proper land use. The result form the current study can be used as the basic information to solve problems from improper land utilization and air pollution (by road traffic). It also can be utilized to evaluate air pollution level according to land use and road characteristics and to help to choose the best location of land use to comply with the road function and status.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.2
• /
• pp.121-128
• /
• 2014

BACKGROUND: The disease resistant (OsCK1) rice was generated by inserting choline kinase (CK1) and phosphinothricin acetyltransferase (PAT) genes isolated from Oryza sativa and Streptomyces hygroscopicus into the genome of the rice, Nakdongbyeo. With the potential problems of safeties, the evaluations on non-target organisms are essentially required for the environmental risk assessment of genetically modified (GM) crops. In the present study, we conducted the evaluation of acute toxicity on Daphnia magna that commonly used as a model organism in ecotoxicological studies for non-target organism evaluation. METHODS AND RESULTS: Effect of acute toxicity to Daphnia magna by each concentration were investigated in the disease resistant (OsCK1) rice and non-genetically modified (non-GM) rice, Nakdongbyeo, as concentration (0, 1,000, 1,800, 3,240, 5,830, 10,500 and 20,000 mg/L). The OsCK1 rice used for the test was confirmed to express the OsCK1/PAT gene by the PCR(Polymerase chain reaction) and western blot analysis. Feeding test showed that no significant differences in cumulative immobility and abnormal response of Daphnia magna fed on OsCK1 rice or non-GM rice. The 48hr-$EC_{50}$ values showed no difference between OsCK1 rice (3,147.18 mg/L) and non-GM rice (3,596.27 mg/L). CONCLUSION: This result suggested that there was no significant difference in toxicity to Daphnia magna between OsCK1 rice and non-GM counterpart.

• KIEAE Journal
• /
• v.17 no.3
• /
• pp.91-97
• /
• 2017

Purpose: Various studies on a light shelf are in progress, but it has the problem of glare occurrence. The present study suggested a diffusion film as the method for resolving the glare problem, and aimed to establish light shelf-related basic data by conducting the performance evaluation of a light shelf depending on the installation position of the diffusion film. Method: To carry out the light shelf performance evaluation depending on the diffusion film installation position, three cases were established: no diffusion film installation (Case 1), diffusion film installation on the reflector (Case 2), and diffusion film installation on the upper glass surface of the window for light shelf installation (Case 3); and the energy reduction performance, luminance, and luminance contrast were analyzed based on a testbed. Result: The conclusions of this study are as follows. 1) When the diffusion film was applied, the amount of light introduced through the light shelf decreased, and the average indoor illumination decreased accordingly. 2) For Case 3, the lighting energy reduction performance was identical to the lighting energy reduction efficiency of the existing light shelf; and for Case 2, it was found to be inappropriate as the lighting energy consumption increased compared to that of the existing light shelf. 3) The analysis of the glare for the cases established in this study showed that the luminance contrast was low for Case 3, and thus the glare problem could be minimized. 4) The specific angle of the light shelf could induce the glare problem by increasing the luminance depending on the external condition. 5) Based on the aforementioned contents, the installation position of the diffusion film for improving the lighting performance and glare problem of the light shelf was found to be the upper glass surface of the window for light shelf installation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.1
• /
• pp.68-79
• /
• 2011

This paper focuses on the opinion information extraction and analysis system through Web mining that is based on statistics collected from Web contents. That is, users' opinion information which is scattered across several websites can be automatically analyzed and extracted. The system provides the opinion information search service that enables users to search for real-time positive and negative opinions and check their statistics. Also, users can do real-time search and monitoring about other opinion information by putting keywords in the system. Proposing technique proved that the actual performance is excellent by comparison experiment with other techniques. Performance evaluation of function extracting positive/negative opinion information, the performance evaluation applying dynamic window technique and tokenizer technique for multilingual information retrieval, and the performance evaluation of technique extracting exact multilingual phonetic translation are carried out. The experiment with typical movie review sentence and Wikipedia experiment data as object as that applying example is carried out and the result is analyzed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1B
• /
• pp.27-38
• /
• 2006

The storage function model (SFM) has been used for the flood forecasting in Korea. The SFM has a simple calculation process and it is known that the model is more reasonable than linear model because it considers non-linearity of flood runoff. However, the determination of parameters is very difficult. In general, the trial and error method which is an manual calibration by the decision of a model manager. This study calibrated the parameters by the trial and error method and optimization technique. The calibrated parameters were compared with the representative parameters which are used in the Flood Control Centers in Korea. Also, the evaluation indexes on objective functions and calibration methods for the comparative analysis of simulation efficiency. As a result, the Genetic Algorithm showed the smallest variation in objective functions and, in this study, it is known that the objective function of SSR (Sum of Squared of Residual) is the best one for the flood forecasting.

• Hip & pelvis
• /
• v.35 no.2
• /
• pp.99-107
• /
• 2023

Purpose: Bipolar hemiarthroplasty has recently been acknowledged as an effective option for treatment of unstable intertrochanteric fracture. Trochanteric fragment nonunion can cause postoperative weakness of the abductor muscle and dislocation; therefore, reduction and fixation of the fragment is essential. The purpose of this study was to perform an evaluation and analysis of the outcomes of bipolar hemiarthroplasty using a useful wiring technique for management of unstable intertrochanteric fractures. Materials and Methods: A total of 217 patients who underwent bipolar hemiarthroplasty using a cementless stem and a wiring technique for management of unstable intertrochanteric femoral fractures (AO/OTA classification 31-A2) at our hospital from January 2017 to December 2020 were included in this study. Evaluation of clinical outcomes was performed using the Harris hip score (HHS) and the ambulatory capacity reported by patients was classified according to Koval stage at six months postoperatively. Evaluation of radiologic outcomes for subsidence, breakage of wiring, and loosening was also performed using plain radiographs at six months postoperatively. Results: Among 217 patients, five patients died during the follow-up period as a result of problems unrelated to the operation. The mean HHS was 75±12 and the mean Koval category before the injury was 2.5±1.8. A broken wire was detected around the greater trochanter and lesser trochanter in 25 patients (11.5%). The mean distance of stem subsidence was 2.2±1.7 mm. Conclusion: Our wiring fixation technique can be regarded as an effective additional surgical option for fixation of trochanteric fracture fragments during performance of bipolar hemiarthroplasty.

• Fire Science and Engineering
• /
• v.33 no.3
• /
• pp.84-90
• /
• 2019

In this study, a fire and evacuation inside an electronic equipment room in environmental energy facilities were conducted and evaluated using a numerical analysis method. In the fire simulation, the visual distance, temperature distribution, and CO concentration distribution were analyzed using FDS. Based on the results, the Pathfinder program, which is an evacuation simulation, was used to calculate the evacuation time of the occupants and derive an evacuation safety evaluation. As a result, the Available safe Egress time (ASET) of P-01 and P-05 was 203.3 and 398.6 s, respectively. For the Required safety Egress time (RSET) results, all evacuees were evacuated at all points and the safety of the evacuee was secured this simulation showed that the safety evaluation is based on the non - operation of the fire - fighting equipment to improve the safety, making it possible to secure better evacuation safety performance owing to the fire of other fire - fighting facilities.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.27 no.2
• /
• pp.171-191
• /
• 2016

This research was examined to evaluate whether the websites of 6 policy research institutes provide web resources which were collected and provided as information resources, and that they were sure that the web resources had value as policy information by content analysis method. Web resources provided as policy information in policy research institutes were classified into and evaluated by 4 categories. Evaluation had been conducted on 10 items in the 4 categories of content, design, accessibility and meta data. From the result, the information content have been found to be reliable and up-to-date although more thorough description is required. Navigation and the search function in the design category were found to be excellent, but dead links were present in all of the institutions. The accessibility was proven to be great as it was able to access information with only three clicks. However, it has been found that a comprehensive review of the meta data is required in order to improve the accuracy of search functions. In conclusion, improvements to the dead link problems, quality control of the meta data, systematic and professional management plan of policy research information, and the establishment of a comprehensive policy research information portal system have been proposed.